Skyworks Solutions

SI3210-E-GM Single-Channel SLIC/CODEC | Skyworks

Teilenummer: SI3210-E-GM ✗ Abgekündigt
3.3 V or 5 V Vdss Caller-ID generation supported Id 38-QFN exposed-pad package, 5 mm x 7 mm Package
MOQ: 1 |

SI3210-E-GM Übersicht

The Skyworks Solutions Inc. SI3210-E-GM is a single-channel Subscriber Line Interface Concept and codec integrated circuit designed for telephone-line interface applications. The device supports 3.3 V or 5 V operation, provides PCM and SPI digital interfaces, and is packaged in a 38-QFN exposed-pad package measuring 5 mm by 7 mm. Its core function combines telephone-line signaling, voice-channel conversion, DTMF processing, caller-ID support, and programmable ringing generation in one mixed-signal interface device.

A Subscriber Line Interface Concept, or SLIC, is the analog and digital front end used to connect a digital voice system to a copper telephone pair. The SLIC performs functions such as line-voltage generation, line-current supervision, voice-band signal handling, and tone detection. The SI3210-E-GM is part of the ProSLIC family, combining the SLIC and codec functions to reduce the number of components required in a telephone interface design. Its single-channel architecture is suited to one analog line per device.

The SI3210-E-GM operates from a 3.3 V or 5 V supply and supports PCM and SPI interfaces for connection to digital communication equipment. The line interface includes programmable ringing capability, DTMF generation and decoding, and caller-ID generation functions. The device also provides a DC-DC controller for tracking battery operation from a wider input range, allowing the line-side circuitry to be supplied from a system rail while generating the voltage required by the telephone interface. The manufacturer describes the ringing generator as supporting up to five REN of internal ringing and software-configurable behavior.

The 38-QFN exposed-pad package provides a compact surface-mount footprint for telecommunications equipment and allows the thermal pad to be connected to the PCB ground plane. The package is suitable for designs requiring a small line-card footprint while maintaining a single line per IC. The exposed thermal pad is an important layout consideration because soldering and via connection to the pad improve heat transfer from the device.

Typical uses include analog telephone adapters, voice-over-IP terminal equipment, digital PBX line cards, customer premises equipment, and other telecom systems requiring one subscriber-line interface. Designers should confirm that the selected board supports the device's supply requirements, line-side protection, thermal pad layout, digital interface levels, and required external line-network components before releasing a production design.

The SI3210-E-GM is presented in the 38-QFN (5x7) exposed-pad package and is listed with a -40°C to +85°C operating-temperature range. It is identified as a ProSLIC telecom interface IC with a single-channel architecture. Its combination of PCM and SPI interfaces, integrated telephone-signaling functions, programmable ringing, DTMF support, and DC-DC tracking-battery capability makes it a focused solution for compact single-line telecom interface designs.

Drop-in-Alternativen für SI3210-E-GM – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit SI3210-E-GM (gleiche Bauform und Footprint) – abweichend in Digital Interface, Package.

Skyworks Solutions
Digital Interface: PCM
Package: 38-QFN, 5 mm x 7 mm
Vergleichen mit SI3210-E-GM →

SI3210M-E-GM

✅ Drop-In
📦 38-QFN (5x7)
M-suffix family variant in the same 38-QFN (5x7) package; complete pin and software compatibility is not fully detailed in the cross-reference listing

📋 Referenzalternative (nicht im Katalog)

SI3210-E-GM Technische Daten

Device Type Single-channel Subscriber Line Interface Concept (SLIC)/CODEC
Number of Channels 1 channel
Versorgungsspannung 3.3 V or 5 V
Digital Interface PCM and SPI
Gehäuse 38-QFN exposed-pad package, 5 mm x 7 mm
Montageart Surface mount
Internal Ringing Software-configurable up to 5 REN, up to 90 VPK
Tone Signaling DTMF generation and decoding
Caller ID Caller-ID generation supported
DC-DC Controller Tracking-battery controller included
DC-DC Input Range 3.3 V to 35 V
Typical Current Draw 88 mA
Maximum Power Consumption 700 mW
Betriebstemperatur -40°C to +85°C
Manufacturer Product Status Not for new designs
Lead-Free Packaging Lead-free

SI3210-E-GM 38-qfn exposed-pad package, 5 mm x 7 mm Pinbelegungsleitfaden

Pinbelegung für SI3210-E-GM (38-qfn exposed-pad package, 5 mm x 7 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für SI3210-E-GM im 38-qfn exposed-pad package, 5 mm x 7 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für SI3210-E-GM.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

SI3210-E-GM ist geeignet für 6 Anwendungs: Voice-over-IP Terminal Equipment, Analog Telephone Adapter, Digital PBX Line Card, Customer Premises Equipment, Telephony Test and Measurement, Industrial Communication Gateway.

📱

Voice-over-IP Terminal Equipment

The SI3210-E-GM fits a single-line Voice-over-IP terminal because it combines the analog telephone-line interface with codec and digital-host connectivity. PCM and SPI interfaces allow the device to connect to a digital communications controller while DTMF generation and decoding support call-control signaling. The 38-QFN 5 mm by 7 mm exposed-pad package helps keep the line-card footprint compact. Designers should verify line impedance, overvoltage protection, ring-voltage requirements, and the exact host-interface timing in the Si3210/Si3211 datasheet before production.

📞

Analog Telephone Adapter

An analog telephone adapter can use the SI3210-E-GM as the line-side interface for one subscriber line. Its integrated ringing generation, DTMF processing, caller-ID generation, and codec functions reduce the discrete circuitry required around the telephone pair. The device accepts a 3.3 V or 5 V logic supply, while its tracking-battery DC-DC controller supports a 3.3 V to 35 V input range. A production design must still include the appropriate line protection, surge handling, and regulatory-approved telephone-network interface components.

🏢

Digital PBX Line Card

The SI3210-E-GM is appropriate for a digital PBX line card that handles one analog line per device. Its PCM interface supports structured digital transport to a line-card controller, while the SPI interface provides a separate control path for configuration and status. The single-channel architecture is straightforward to scale across multiple board positions. The compact 38-QFN exposed-pad package must be laid out with adequate copper and thermal vias, and the design should account for the device’s not-for-new-designs lifecycle status when planning future maintenance.

🏠

Customer Premises Equipment

The SI3210-E-GM can support legacy telephone connectivity in customer premises equipment that bridges copper lines to a digital network. The integrated SLIC and codec reduce the number of external interface blocks, and programmable ringing up to 5 REN and 90 VPK supports centralized ringing generation. DTMF and caller-ID functions help the equipment reproduce common telephone signaling behavior. Engineers should validate ringing cadence, line impedance, on-hook voltage, and regional telephone-network requirements in the final product configuration.

🔧

Telephony Test and Measurement

The SI3210-E-GM can be used in telephony test equipment that needs to emulate or analyze one subscriber-line channel. Its programmable ringing and tone-signaling functions make it useful for exercising call-control behavior, DTMF paths, and caller-ID features. PCM and SPI connectivity permits coordination with a test controller and digital signal processing equipment. The 38-QFN package allows dense test hardware, although the exposed thermal pad and the device’s legacy lifecycle position should be considered in long-lived laboratory platforms.

🏭

Industrial Communication Gateway

The SI3210-E-GM may be used in an industrial communication gateway that must bridge an analog telephone line with industrial or network-facing control electronics. Its single-channel architecture and 38-QFN package fit compact embedded gateways, while PCM and SPI provide flexible host connectivity. The programmable ringing and caller-ID capabilities preserve useful signaling behavior when the gateway connects to legacy equipment. Industrial deployments should add robust line protection, isolation or surge control where required, and verify thermal performance across the specified -40°C to +85°C range.

What is SI3210-E-GM?
The SI3210-E-GM is a single-channel Subscriber Line Interface Concept and codec from Skyworks Solutions Inc. It combines telephone-line interface functions, PCM and SPI digital interfaces, DTMF generation and decoding, caller-ID generation, programmable ringing, and a tracking-battery DC-DC controller in a 38-QFN exposed-pad package. The manufacturer identifies it as a ProSLIC telecom interface IC.
What is the operating voltage of SI3210-E-GM?
The SI3210-E-GM operates from a 3.3 V or 5 V supply. Its DC-DC tracking-battery controller accepts a wider 3.3 V to 35 V input range and generates the voltage required by the line interface. The distinction matters when designing a board that uses a system rail higher than the logic supply.
What package does SI3210-E-GM use?
The SI3210-E-GM uses a 38-QFN exposed-pad package measuring 5 mm by 7 mm. The exposed pad is part of the thermal and electrical land pattern, so the PCB footprint should include the manufacturer-recommended pad geometry and thermal-via arrangement.
Where can I download the SI3210-E-GM datasheet PDF?
The SI3210-E-GM datasheet PDF is available through the Silicon Labs Si3210/Si3211 document linked in the product listing resources. The document describes the ProSLIC programmable CMOS SLIC and codec, including ringing generation, DTMF functions, caller-ID generation, line supervision, and the DC-DC tracking-battery controller. Use the 38-QFN pin description table when assigning PCB signals.
Where can I find the SI3210-E-GM pinout?
The SI3210-E-GM pinout is defined in the Si3210/Si3211 manufacturer datasheet, which is available from the listed Mouser document link. The device is a 38-QFN package with an exposed pad, so pin assignments and thermal-pad connections should be taken directly from the package drawing and pin-description table.
Does SI3210-E-GM support DTMF and caller ID?
Yes. The SI3210-E-GM supports DTMF generation and decoding and includes caller-ID generation functions. These capabilities are integrated into the single-channel ProSLIC architecture, allowing a telecom design to handle tone signaling and caller-ID functions in the same line-interface device.
Is SI3210-E-GM in stock and what is the lead time?
Current stock and lead time should be requested through the Request a Quote form on this page. The manufacturer’s product-status information identifies the SI3210-E-GM as not for new designs, so availability for new production quantities may be limited. The quote team should confirm lifecycle status, quantity, and delivery timing before committing an active design.
What is the price of SI3210-E-GM?
The current commercial price is not stated on this page because quotations and inventory can change. Use the Request a Quote form to request the latest unit price, quantity breaks, and availability for the exact SI3210-E-GM package and ordering configuration.
Where can I buy SI3210-E-GM online?
Use the Request a Quote form on this page to request SI3210-E-GM supply, quantity breaks, and lead time. The exact package suffix and ordering code matter because the device is a legacy telecom interface IC, and its lifecycle status should be confirmed for new designs.
What is the difference between SI3210-E-GM and SI3210M-E-GM?
The SI3210M-E-GM is the M suffix version of the SI3210-E-GM family, and both are listed in the 38-QFN (5x7) package. The available cross-reference data does not provide a complete pin-by-pin or software-compatibility comparison, so replacement requires checking the complete Si3210/Si3211 datasheet and the exact board requirements rather than assuming equivalence.
What can replace SI3210-E-GM?
The SI3210M-E-GM is the closest same-family candidate identified in the cross-reference information and uses the same 38-QFN (5x7) package format. It should not be treated as an unconditional substitute until the complete datasheet confirms pin compatibility, firmware behavior, line-side electrical requirements, and system timing.
Is SI3210-E-GM suitable for VoIP equipment?
Yes. The SI3210-E-GM is suitable for single-line VoIP terminal equipment because it combines a telephone-line interface, codec functionality, PCM and SPI interfaces, DTMF support, and programmable ringing. The exact line impedance, protection, ring-voltage, and regional signaling requirements still need to be checked against the target product design.
What are the key specifications of SI3210-E-GM that engineers should know?
The key SI3210-E-GM specifications are single-channel SLIC/codec operation, 3.3 V or 5 V logic supply, a 3.3 V to 35 V DC-DC tracking-battery input range, PCM and SPI interfaces, programmable ringing up to 5 REN and 90 VPK, DTMF generation and decoding, and a 38-QFN 5 mm by 7 mm exposed-pad package. It is specified for -40°C to +85°C operation.
When should I choose SI3210-E-GM over another SLIC?
Choose the SI3210-E-GM when a design needs one analog subscriber line and benefits from integrated ringing, DTMF, caller-ID, codec, and tracking-battery functions in a compact 38-QFN package. It is less suitable for new designs requiring current lifecycle commitments, multi-channel density, or a different line-side protection architecture.
Is SI3210-E-GM compliant with RoHS and REACH?
The available product information identifies the SI3210-E-GM as lead-free, but it does not provide a confirmed RoHS or REACH declaration for this exact ordering code. Compliance status should therefore be confirmed with the manufacturer or through the Request a Quote form before using the statement in a formal bill of materials.

Technische Referenzdaten für SI3210-E-GM – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the SI3210-E-GM for a compact single-line telecom design that needs integrated SLIC and codec functions, programmable ringing, DTMF processing, caller-ID generation, and a tracking-battery DC-DC controller. The 38-QFN 5 mm by 7 mm package and PCM/SPI interfaces are useful when a line card or adapter must fit into limited board space. Choose the SI3210M-E-GM only after checking the full Si3210/Si3211 datasheet for pin-level behavior, firmware requirements, and electrical compatibility, since the available cross-reference information confirms the package family but not every operating detail. For new designs, favor a currently supported multi-channel telecom interface because the SI3210-E-GM is identified as not for new designs. The SI3210-E-GM remains most appropriate for maintenance, legacy equipment, and qualified designs where supply and long-term support are handled explicitly.

Vergleich mit Alternativen

Parameter Dieses Produkt SI3210M-E-GM
Brand Skyworks Solutions Inc. Skyworks Solutions Inc.
Package 38-QFN (5x7) 38-QFN (5x7)
Device Type Single-channel SLIC/CODEC Single-channel SLIC/CODEC

Wichtigste Unterscheidungsmerkmale

  • Single-channel integration in a compact 38-QFN package (vs. SI3210M-E-GM)
  • Digital connectivity for telecom control designs (vs. SI3210M-E-GM)
  • Programmable telephone signaling (vs. SI3210M-E-GM)

Designhinweise

Use the manufacturer’s 38-QFN land pattern for SI3210-E-GM rather than creating a generic QFN footprint. Confirm exposed-pad dimensions, mask openings, and pin numbering against the Si3210/Si3211 package drawing. Place the device close to the line-side protection components and keep high-voltage ringing-related copper separated from sensitive signal routing where the design architecture permits.

The SI3210-E-GM includes an exposed thermal pad and is rated for -40°C to +85°C operation. Provide a continuous ground-plane connection beneath the pad and use thermal vias where recommended. Check the final PCB copper and enclosure conditions against the 700 mW maximum power-consumption figure when operating near the upper temperature limit.

Do not treat a 3.3 V or 5 V logic supply as the complete power-system specification. The integrated DC-DC tracking-battery controller accepts a 3.3 V to 35 V input range, and the external line-network interface requires the correct protection, filtering, ringing, and telephone-pair components. Confirm the final ring voltage, line impedance, and regional signaling requirements before layout release.

Keep the PCM and SPI routing away from the telephone-side and ringing circuitry, and follow the manufacturer’s recommended decoupling and grounding arrangement. These interfaces connect the SLIC to digital control electronics, so return-path discontinuity or noisy shared ground routing can affect signaling integrity even when the line-side tests appear acceptable.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Yes
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The product listing identifies the device as a lead-free 38-QFN package. RoHS, REACH, halogen-free status, conflict-minerals status, and automotive qualification are not confirmed for the exact ordering code. The device is a telecom interface IC and is not identified as an AEC-Q100 automotive part.

Daten verifiziert am: 2026-11-16 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

si3210 datasheet silabs si3210 SI3210-E-GM datasheet SI3210-E-GM pinout SI3210-E-GM 38-QFN SI3210-E-GM equivalent SI3210-E-GM replacement SI3210-E-GM price SI3210-E-GM stock SI3210-E-GM vs SI3210M-E-GM Skyworks SI3210-E-GM application circuit SI3210-E-GM VoIP

Verwandte Bauteile & Begriffe

Skyworks Solutions Inc. SI3210-E-GM SI3210M-E-GM Subscriber Line Interface Concept SLIC telecom interface IC ProSLIC codec PCM interface SPI interface DTMF caller-ID generation programmable ringing DC-DC tracking-battery controller 38-QFN 5 mm by 7 mm package exposed thermal pad single-line telecom interface Voice-over-IP analog telephone adapter digital PBX line card customer premises equipment 3.3 V 5 V 88 mA
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen