SI3210-E-GM Single-Channel SLIC/CODEC | Skyworks
MPN: SI3210-E-GM ✗ اختتامِ زندگیSI3210-E-GM جائزہ
A Subscriber Line Interface Concept, or SLIC, is the analog and digital front end used to connect a digital voice system to a copper telephone pair. The SLIC performs functions such as line-voltage generation, line-current supervision, voice-band signal handling, and tone detection. The SI3210-E-GM is part of the ProSLIC family, combining the SLIC and codec functions to reduce the number of components required in a telephone interface design. Its single-channel architecture is suited to one analog line per device.
The SI3210-E-GM operates from a 3.3 V or 5 V supply and supports PCM and SPI interfaces for connection to digital communication equipment. The line interface includes programmable ringing capability, DTMF generation and decoding, and caller-ID generation functions. The device also provides a DC-DC controller for tracking battery operation from a wider input range, allowing the line-side circuitry to be supplied from a system rail while generating the voltage required by the telephone interface. The manufacturer describes the ringing generator as supporting up to five REN of internal ringing and software-configurable behavior.
The 38-QFN exposed-pad package provides a compact surface-mount footprint for telecommunications equipment and allows the thermal pad to be connected to the PCB ground plane. The package is suitable for designs requiring a small line-card footprint while maintaining a single line per IC. The exposed thermal pad is an important layout consideration because soldering and via connection to the pad improve heat transfer from the device.
Typical uses include analog telephone adapters, voice-over-IP terminal equipment, digital PBX line cards, customer premises equipment, and other telecom systems requiring one subscriber-line interface. Designers should confirm that the selected board supports the device's supply requirements, line-side protection, thermal pad layout, digital interface levels, and required external line-network components before releasing a production design.
The SI3210-E-GM is presented in the 38-QFN (5x7) exposed-pad package and is listed with a -40°C to +85°C operating-temperature range. It is identified as a ProSLIC telecom interface IC with a single-channel architecture. Its combination of PCM and SPI interfaces, integrated telephone-signaling functions, programmable ringing, DTMF support, and DC-DC tracking-battery capability makes it a focused solution for compact single-line telecom interface designs.
کے لیے ڈراپ اِن متبادل SI3210-E-GM — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں SI3210-E-GM (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Digital Interface, Package.
SI3210M-E-GM
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SI3210-E-GM تفصیلات
| Device Type | Single-channel Subscriber Line Interface Concept (SLIC)/CODEC |
| Number of Channels | 1 channel |
| سپلائی وولٹیج | 3.3 V or 5 V |
| Digital Interface | PCM and SPI |
| پیکیج | 38-QFN exposed-pad package, 5 mm x 7 mm |
| ماؤنٹنگ ٹائپ | Surface mount |
| Internal Ringing | Software-configurable up to 5 REN, up to 90 VPK |
| Tone Signaling | DTMF generation and decoding |
| Caller ID | Caller-ID generation supported |
| DC-DC Controller | Tracking-battery controller included |
| DC-DC Input Range | 3.3 V to 35 V |
| Typical Current Draw | 88 mA |
| Maximum Power Consumption | 700 mW |
| آپریٹنگ درجہ حرارت | -40°C to +85°C |
| Manufacturer Product Status | Not for new designs |
| Lead-Free Packaging | Lead-free |
SI3210-E-GM 38-qfn exposed-pad package, 5 mm x 7 mm پن کنفیگریشن گائیڈ
SI3210-E-GM (38-qfn exposed-pad package, 5 mm x 7 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SI3210-E-GM.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
SI3210-E-GM کے لیے موزوں ہے 6 ایپلیکیشنs: Voice-over-IP Terminal Equipment, Analog Telephone Adapter, Digital PBX Line Card, Customer Premises Equipment, Telephony Test and Measurement, Industrial Communication Gateway.
Voice-over-IP Terminal Equipment
The SI3210-E-GM fits a single-line Voice-over-IP terminal because it combines the analog telephone-line interface with codec and digital-host connectivity. PCM and SPI interfaces allow the device to connect to a digital communications controller while DTMF generation and decoding support call-control signaling. The 38-QFN 5 mm by 7 mm exposed-pad package helps keep the line-card footprint compact. Designers should verify line impedance, overvoltage protection, ring-voltage requirements, and the exact host-interface timing in the Si3210/Si3211 datasheet before production.
تجویز کردہ
Analog Telephone Adapter
An analog telephone adapter can use the SI3210-E-GM as the line-side interface for one subscriber line. Its integrated ringing generation, DTMF processing, caller-ID generation, and codec functions reduce the discrete circuitry required around the telephone pair. The device accepts a 3.3 V or 5 V logic supply, while its tracking-battery DC-DC controller supports a 3.3 V to 35 V input range. A production design must still include the appropriate line protection, surge handling, and regulatory-approved telephone-network interface components.
تجویز کردہ
Digital PBX Line Card
The SI3210-E-GM is appropriate for a digital PBX line card that handles one analog line per device. Its PCM interface supports structured digital transport to a line-card controller, while the SPI interface provides a separate control path for configuration and status. The single-channel architecture is straightforward to scale across multiple board positions. The compact 38-QFN exposed-pad package must be laid out with adequate copper and thermal vias, and the design should account for the device’s not-for-new-designs lifecycle status when planning future maintenance.
تجویز کردہ
Customer Premises Equipment
The SI3210-E-GM can support legacy telephone connectivity in customer premises equipment that bridges copper lines to a digital network. The integrated SLIC and codec reduce the number of external interface blocks, and programmable ringing up to 5 REN and 90 VPK supports centralized ringing generation. DTMF and caller-ID functions help the equipment reproduce common telephone signaling behavior. Engineers should validate ringing cadence, line impedance, on-hook voltage, and regional telephone-network requirements in the final product configuration.
تجویز کردہ
Telephony Test and Measurement
The SI3210-E-GM can be used in telephony test equipment that needs to emulate or analyze one subscriber-line channel. Its programmable ringing and tone-signaling functions make it useful for exercising call-control behavior, DTMF paths, and caller-ID features. PCM and SPI connectivity permits coordination with a test controller and digital signal processing equipment. The 38-QFN package allows dense test hardware, although the exposed thermal pad and the device’s legacy lifecycle position should be considered in long-lived laboratory platforms.
تجویز کردہ
Industrial Communication Gateway
The SI3210-E-GM may be used in an industrial communication gateway that must bridge an analog telephone line with industrial or network-facing control electronics. Its single-channel architecture and 38-QFN package fit compact embedded gateways, while PCM and SPI provide flexible host connectivity. The programmable ringing and caller-ID capabilities preserve useful signaling behavior when the gateway connects to legacy equipment. Industrial deployments should add robust line protection, isolation or surge control where required, and verify thermal performance across the specified -40°C to +85°C range.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا SI3210-E-GM — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | SI3210M-E-GM |
|---|---|---|
| Brand | Skyworks Solutions Inc. | Skyworks Solutions Inc. |
| Package | 38-QFN (5x7) | 38-QFN (5x7) |
| Device Type | Single-channel SLIC/CODEC | Single-channel SLIC/CODEC |
اہم امتیازی خصوصیات
- Single-channel integration in a compact 38-QFN package (بمقابلہSI3210M-E-GM)
- Digital connectivity for telecom control designs (بمقابلہSI3210M-E-GM)
- Programmable telephone signaling (بمقابلہSI3210M-E-GM)
ڈیزائن نوٹس
Use the manufacturer’s 38-QFN land pattern for SI3210-E-GM rather than creating a generic QFN footprint. Confirm exposed-pad dimensions, mask openings, and pin numbering against the Si3210/Si3211 package drawing. Place the device close to the line-side protection components and keep high-voltage ringing-related copper separated from sensitive signal routing where the design architecture permits.
The SI3210-E-GM includes an exposed thermal pad and is rated for -40°C to +85°C operation. Provide a continuous ground-plane connection beneath the pad and use thermal vias where recommended. Check the final PCB copper and enclosure conditions against the 700 mW maximum power-consumption figure when operating near the upper temperature limit.
Do not treat a 3.3 V or 5 V logic supply as the complete power-system specification. The integrated DC-DC tracking-battery controller accepts a 3.3 V to 35 V input range, and the external line-network interface requires the correct protection, filtering, ringing, and telephone-pair components. Confirm the final ring voltage, line impedance, and regional signaling requirements before layout release.
Keep the PCM and SPI routing away from the telephone-side and ringing circuitry, and follow the manufacturer’s recommended decoupling and grounding arrangement. These interfaces connect the SLIC to digital control electronics, so return-path discontinuity or noisy shared ground routing can affect signaling integrity even when the line-side tests appear acceptable.
تعمیل کی معلومات
The product listing identifies the device as a lead-free 38-QFN package. RoHS, REACH, halogen-free status, conflict-minerals status, and automotive qualification are not confirmed for the exact ordering code. The device is a telecom interface IC and is not identified as an AEC-Q100 automotive part.