SI3210-E-GM Single-Channel SLIC/CODEC | Skyworks
MPN: SI3210-E-GM ✗ Tapus ng BuhaySI3210-E-GM Ulas
A Subscriber Line Interface Concept, or SLIC, is the analog and digital front end used to connect a digital voice system to a copper telephone pair. The SLIC performs functions such as line-voltage generation, line-current supervision, voice-band signal handling, and tone detection. The SI3210-E-GM is part of the ProSLIC family, combining the SLIC and codec functions to reduce the number of components required in a telephone interface design. Its single-channel architecture is suited to one analog line per device.
The SI3210-E-GM operates from a 3.3 V or 5 V supply and supports PCM and SPI interfaces for connection to digital communication equipment. The line interface includes programmable ringing capability, DTMF generation and decoding, and caller-ID generation functions. The device also provides a DC-DC controller for tracking battery operation from a wider input range, allowing the line-side circuitry to be supplied from a system rail while generating the voltage required by the telephone interface. The manufacturer describes the ringing generator as supporting up to five REN of internal ringing and software-configurable behavior.
The 38-QFN exposed-pad package provides a compact surface-mount footprint for telecommunications equipment and allows the thermal pad to be connected to the PCB ground plane. The package is suitable for designs requiring a small line-card footprint while maintaining a single line per IC. The exposed thermal pad is an important layout consideration because soldering and via connection to the pad improve heat transfer from the device.
Typical uses include analog telephone adapters, voice-over-IP terminal equipment, digital PBX line cards, customer premises equipment, and other telecom systems requiring one subscriber-line interface. Designers should confirm that the selected board supports the device's supply requirements, line-side protection, thermal pad layout, digital interface levels, and required external line-network components before releasing a production design.
The SI3210-E-GM is presented in the 38-QFN (5x7) exposed-pad package and is listed with a -40°C to +85°C operating-temperature range. It is identified as a ProSLIC telecom interface IC with a single-channel architecture. Its combination of PCM and SPI interfaces, integrated telephone-signaling functions, programmable ringing, DTMF support, and DC-DC tracking-battery capability makes it a focused solution for compact single-line telecom interface designs.
Mga alternatibo na pwedeng ilagay na SI3210-E-GM — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok SI3210-E-GM (parehas na form factor at footprint) — pagkakaiba sa Digital Interface, Package.
SI3210M-E-GM
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SI3210-E-GM Mga Spesipikasyon
| Device Type | Single-channel Subscriber Line Interface Concept (SLIC)/CODEC |
| Number of Channels | 1 channel |
| Volte ng Pagbibigay | 3.3 V or 5 V |
| Digital Interface | PCM and SPI |
| Packhaging | 38-QFN exposed-pad package, 5 mm x 7 mm |
| Uri ng Pagpapasok | Surface mount |
| Internal Ringing | Software-configurable up to 5 REN, up to 90 VPK |
| Tone Signaling | DTMF generation and decoding |
| Caller ID | Caller-ID generation supported |
| DC-DC Controller | Tracking-battery controller included |
| DC-DC Input Range | 3.3 V to 35 V |
| Typical Current Draw | 88 mA |
| Maximum Power Consumption | 700 mW |
| Temperature na Operasyon | -40°C to +85°C |
| Manufacturer Product Status | Not for new designs |
| Lead-Free Packaging | Lead-free |
Gabay sa Pin Configuration ng SI3210-E-GM 38-qfn exposed-pad package, 5 mm x 7 mm
Pin configuration para sa SI3210-E-GM (38-qfn exposed-pad package, 5 mm x 7 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa SI3210-E-GM.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
SI3210-E-GM ay nararapat para sa 6 aplikasyons: Voice-over-IP Terminal Equipment, Analog Telephone Adapter, Digital PBX Line Card, Customer Premises Equipment, Telephony Test and Measurement, Industrial Communication Gateway.
Voice-over-IP Terminal Equipment
The SI3210-E-GM fits a single-line Voice-over-IP terminal because it combines the analog telephone-line interface with codec and digital-host connectivity. PCM and SPI interfaces allow the device to connect to a digital communications controller while DTMF generation and decoding support call-control signaling. The 38-QFN 5 mm by 7 mm exposed-pad package helps keep the line-card footprint compact. Designers should verify line impedance, overvoltage protection, ring-voltage requirements, and the exact host-interface timing in the Si3210/Si3211 datasheet before production.
Inirekomenda
Analog Telephone Adapter
An analog telephone adapter can use the SI3210-E-GM as the line-side interface for one subscriber line. Its integrated ringing generation, DTMF processing, caller-ID generation, and codec functions reduce the discrete circuitry required around the telephone pair. The device accepts a 3.3 V or 5 V logic supply, while its tracking-battery DC-DC controller supports a 3.3 V to 35 V input range. A production design must still include the appropriate line protection, surge handling, and regulatory-approved telephone-network interface components.
Inirekomenda
Digital PBX Line Card
The SI3210-E-GM is appropriate for a digital PBX line card that handles one analog line per device. Its PCM interface supports structured digital transport to a line-card controller, while the SPI interface provides a separate control path for configuration and status. The single-channel architecture is straightforward to scale across multiple board positions. The compact 38-QFN exposed-pad package must be laid out with adequate copper and thermal vias, and the design should account for the device’s not-for-new-designs lifecycle status when planning future maintenance.
Inirekomenda
Customer Premises Equipment
The SI3210-E-GM can support legacy telephone connectivity in customer premises equipment that bridges copper lines to a digital network. The integrated SLIC and codec reduce the number of external interface blocks, and programmable ringing up to 5 REN and 90 VPK supports centralized ringing generation. DTMF and caller-ID functions help the equipment reproduce common telephone signaling behavior. Engineers should validate ringing cadence, line impedance, on-hook voltage, and regional telephone-network requirements in the final product configuration.
Inirekomenda
Telephony Test and Measurement
The SI3210-E-GM can be used in telephony test equipment that needs to emulate or analyze one subscriber-line channel. Its programmable ringing and tone-signaling functions make it useful for exercising call-control behavior, DTMF paths, and caller-ID features. PCM and SPI connectivity permits coordination with a test controller and digital signal processing equipment. The 38-QFN package allows dense test hardware, although the exposed thermal pad and the device’s legacy lifecycle position should be considered in long-lived laboratory platforms.
Inirekomenda
Industrial Communication Gateway
The SI3210-E-GM may be used in an industrial communication gateway that must bridge an analog telephone line with industrial or network-facing control electronics. Its single-channel architecture and 38-QFN package fit compact embedded gateways, while PCM and SPI provide flexible host connectivity. The programmable ringing and caller-ID capabilities preserve useful signaling behavior when the gateway connects to legacy equipment. Industrial deployments should add robust line protection, isolation or surge control where required, and verify thermal performance across the specified -40°C to +85°C range.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for SI3210-E-GM — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | SI3210M-E-GM |
|---|---|---|
| Brand | Skyworks Solutions Inc. | Skyworks Solutions Inc. |
| Package | 38-QFN (5x7) | 38-QFN (5x7) |
| Device Type | Single-channel SLIC/CODEC | Single-channel SLIC/CODEC |
Pangunahing mga Pagkakaiba
- Single-channel integration in a compact 38-QFN package (kumpara saSI3210M-E-GM)
- Digital connectivity for telecom control designs (kumpara saSI3210M-E-GM)
- Programmable telephone signaling (kumpara saSI3210M-E-GM)
Talaan ng Disenyo
Use the manufacturer’s 38-QFN land pattern for SI3210-E-GM rather than creating a generic QFN footprint. Confirm exposed-pad dimensions, mask openings, and pin numbering against the Si3210/Si3211 package drawing. Place the device close to the line-side protection components and keep high-voltage ringing-related copper separated from sensitive signal routing where the design architecture permits.
The SI3210-E-GM includes an exposed thermal pad and is rated for -40°C to +85°C operation. Provide a continuous ground-plane connection beneath the pad and use thermal vias where recommended. Check the final PCB copper and enclosure conditions against the 700 mW maximum power-consumption figure when operating near the upper temperature limit.
Do not treat a 3.3 V or 5 V logic supply as the complete power-system specification. The integrated DC-DC tracking-battery controller accepts a 3.3 V to 35 V input range, and the external line-network interface requires the correct protection, filtering, ringing, and telephone-pair components. Confirm the final ring voltage, line impedance, and regional signaling requirements before layout release.
Keep the PCM and SPI routing away from the telephone-side and ringing circuitry, and follow the manufacturer’s recommended decoupling and grounding arrangement. These interfaces connect the SLIC to digital control electronics, so return-path discontinuity or noisy shared ground routing can affect signaling integrity even when the line-side tests appear acceptable.
Impormasyon ng Pagsunod sa Kautusan
The product listing identifies the device as a lead-free 38-QFN package. RoHS, REACH, halogen-free status, conflict-minerals status, and automotive qualification are not confirmed for the exact ordering code. The device is a telecom interface IC and is not identified as an AEC-Q100 automotive part.