SI3210-E-GM Single-Channel SLIC/CODEC | Skyworks
MPN: SI3210-E-GM ✗ 停產SI3210-E-GM 概覽
A Subscriber Line Interface Concept, or SLIC, is the analog and digital front end used to connect a digital voice system to a copper telephone pair. The SLIC performs functions such as line-voltage generation, line-current supervision, voice-band signal handling, and tone detection. The SI3210-E-GM is part of the ProSLIC family, combining the SLIC and codec functions to reduce the number of components required in a telephone interface design. Its single-channel architecture is suited to one analog line per device.
The SI3210-E-GM operates from a 3.3 V or 5 V supply and supports PCM and SPI interfaces for connection to digital communication equipment. The line interface includes programmable ringing capability, DTMF generation and decoding, and caller-ID generation functions. The device also provides a DC-DC controller for tracking battery operation from a wider input range, allowing the line-side circuitry to be supplied from a system rail while generating the voltage required by the telephone interface. The manufacturer describes the ringing generator as supporting up to five REN of internal ringing and software-configurable behavior.
The 38-QFN exposed-pad package provides a compact surface-mount footprint for telecommunications equipment and allows the thermal pad to be connected to the PCB ground plane. The package is suitable for designs requiring a small line-card footprint while maintaining a single line per IC. The exposed thermal pad is an important layout consideration because soldering and via connection to the pad improve heat transfer from the device.
Typical uses include analog telephone adapters, voice-over-IP terminal equipment, digital PBX line cards, customer premises equipment, and other telecom systems requiring one subscriber-line interface. Designers should confirm that the selected board supports the device's supply requirements, line-side protection, thermal pad layout, digital interface levels, and required external line-network components before releasing a production design.
The SI3210-E-GM is presented in the 38-QFN (5x7) exposed-pad package and is listed with a -40°C to +85°C operating-temperature range. It is identified as a ProSLIC telecom interface IC with a single-channel architecture. Its combination of PCM and SPI interfaces, integrated telephone-signaling functions, programmable ringing, DTMF support, and DC-DC tracking-battery capability makes it a focused solution for compact single-line telecom interface designs.
直接替換替代品,適用於 SI3210-E-GM — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: SI3210-E-GM (相同外形與佔位) — 差異在於 Digital Interface, Package.
SI3210M-E-GM
✅ 直接替換📋 參考替代品(不在目錄中)
SI3210-E-GM 規格
| Device Type | Single-channel Subscriber Line Interface Concept (SLIC)/CODEC |
| Number of Channels | 1 channel |
| 供應電壓 | 3.3 V or 5 V |
| Digital Interface | PCM and SPI |
| 封裝 | 38-QFN exposed-pad package, 5 mm x 7 mm |
| 安裝類型 | Surface mount |
| Internal Ringing | Software-configurable up to 5 REN, up to 90 VPK |
| Tone Signaling | DTMF generation and decoding |
| Caller ID | Caller-ID generation supported |
| DC-DC Controller | Tracking-battery controller included |
| DC-DC Input Range | 3.3 V to 35 V |
| Typical Current Draw | 88 mA |
| Maximum Power Consumption | 700 mW |
| 工作溫度 | -40°C to +85°C |
| Manufacturer Product Status | Not for new designs |
| Lead-Free Packaging | Lead-free |
SI3210-E-GM 38-qfn exposed-pad package, 5 mm x 7 mm 腳位配置指南
SI3210-E-GM(38-qfn exposed-pad package, 5 mm x 7 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: SI3210-E-GM.
請參閱 資料表 以查看完整腳位配置。
典型應用
SI3210-E-GM 適用於 6 應用s: Voice-over-IP Terminal Equipment, Analog Telephone Adapter, Digital PBX Line Card, Customer Premises Equipment, Telephony Test and Measurement, Industrial Communication Gateway.
Voice-over-IP Terminal Equipment
The SI3210-E-GM fits a single-line Voice-over-IP terminal because it combines the analog telephone-line interface with codec and digital-host connectivity. PCM and SPI interfaces allow the device to connect to a digital communications controller while DTMF generation and decoding support call-control signaling. The 38-QFN 5 mm by 7 mm exposed-pad package helps keep the line-card footprint compact. Designers should verify line impedance, overvoltage protection, ring-voltage requirements, and the exact host-interface timing in the Si3210/Si3211 datasheet before production.
推薦
Analog Telephone Adapter
An analog telephone adapter can use the SI3210-E-GM as the line-side interface for one subscriber line. Its integrated ringing generation, DTMF processing, caller-ID generation, and codec functions reduce the discrete circuitry required around the telephone pair. The device accepts a 3.3 V or 5 V logic supply, while its tracking-battery DC-DC controller supports a 3.3 V to 35 V input range. A production design must still include the appropriate line protection, surge handling, and regulatory-approved telephone-network interface components.
推薦
Digital PBX Line Card
The SI3210-E-GM is appropriate for a digital PBX line card that handles one analog line per device. Its PCM interface supports structured digital transport to a line-card controller, while the SPI interface provides a separate control path for configuration and status. The single-channel architecture is straightforward to scale across multiple board positions. The compact 38-QFN exposed-pad package must be laid out with adequate copper and thermal vias, and the design should account for the device’s not-for-new-designs lifecycle status when planning future maintenance.
推薦
Customer Premises Equipment
The SI3210-E-GM can support legacy telephone connectivity in customer premises equipment that bridges copper lines to a digital network. The integrated SLIC and codec reduce the number of external interface blocks, and programmable ringing up to 5 REN and 90 VPK supports centralized ringing generation. DTMF and caller-ID functions help the equipment reproduce common telephone signaling behavior. Engineers should validate ringing cadence, line impedance, on-hook voltage, and regional telephone-network requirements in the final product configuration.
推薦
Telephony Test and Measurement
The SI3210-E-GM can be used in telephony test equipment that needs to emulate or analyze one subscriber-line channel. Its programmable ringing and tone-signaling functions make it useful for exercising call-control behavior, DTMF paths, and caller-ID features. PCM and SPI connectivity permits coordination with a test controller and digital signal processing equipment. The 38-QFN package allows dense test hardware, although the exposed thermal pad and the device’s legacy lifecycle position should be considered in long-lived laboratory platforms.
推薦
Industrial Communication Gateway
The SI3210-E-GM may be used in an industrial communication gateway that must bridge an analog telephone line with industrial or network-facing control electronics. Its single-channel architecture and 38-QFN package fit compact embedded gateways, while PCM and SPI provide flexible host connectivity. The programmable ringing and caller-ID capabilities preserve useful signaling behavior when the gateway connects to legacy equipment. Industrial deployments should add robust line protection, isolation or surge control where required, and verify thermal performance across the specified -40°C to +85°C range.
推薦
推薦產品摘要
工程參考資料,適用於 SI3210-E-GM — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | SI3210M-E-GM |
|---|---|---|
| Brand | Skyworks Solutions Inc. | Skyworks Solutions Inc. |
| Package | 38-QFN (5x7) | 38-QFN (5x7) |
| Device Type | Single-channel SLIC/CODEC | Single-channel SLIC/CODEC |
主要差異化特點
- Single-channel integration in a compact 38-QFN package (對比SI3210M-E-GM)
- Digital connectivity for telecom control designs (對比SI3210M-E-GM)
- Programmable telephone signaling (對比SI3210M-E-GM)
設計說明
Use the manufacturer’s 38-QFN land pattern for SI3210-E-GM rather than creating a generic QFN footprint. Confirm exposed-pad dimensions, mask openings, and pin numbering against the Si3210/Si3211 package drawing. Place the device close to the line-side protection components and keep high-voltage ringing-related copper separated from sensitive signal routing where the design architecture permits.
The SI3210-E-GM includes an exposed thermal pad and is rated for -40°C to +85°C operation. Provide a continuous ground-plane connection beneath the pad and use thermal vias where recommended. Check the final PCB copper and enclosure conditions against the 700 mW maximum power-consumption figure when operating near the upper temperature limit.
Do not treat a 3.3 V or 5 V logic supply as the complete power-system specification. The integrated DC-DC tracking-battery controller accepts a 3.3 V to 35 V input range, and the external line-network interface requires the correct protection, filtering, ringing, and telephone-pair components. Confirm the final ring voltage, line impedance, and regional signaling requirements before layout release.
Keep the PCM and SPI routing away from the telephone-side and ringing circuitry, and follow the manufacturer’s recommended decoupling and grounding arrangement. These interfaces connect the SLIC to digital control electronics, so return-path discontinuity or noisy shared ground routing can affect signaling integrity even when the line-side tests appear acceptable.
合規資訊
The product listing identifies the device as a lead-free 38-QFN package. RoHS, REACH, halogen-free status, conflict-minerals status, and automotive qualification are not confirmed for the exact ordering code. The device is a telecom interface IC and is not identified as an AEC-Q100 automotive part.