TPS826711 - 600mA 1.8V MicroSiP Buck Module | Texas Instruments
Teilenummer: TPS826711 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $2.45 | $2,45 |
| 10 | $2.2 | $22,00 |
| 100 | $1.85 | $185,00 |
| 500 | $1.55 | $775,00 |
| 1.000 | $1.3 | $1.300,00 |
TPS826711 Übersicht
A step-down converter, also known as a buck converter, is a type of DC-DC converter that steps down an input voltage to a lower output voltage while maintaining high efficiency. It is a fundamental building block in power management, converting a higher voltage rail to a lower one for powering digital ICs, sensors, and other loads. The TPS826711 belongs to the family of switching regulators, which are more efficient than linear regulators for large voltage differences, making them essential in battery-powered devices where power conservation is critical.
Key features include a regulated 5.5MHz switching frequency, which allows tiny external components and reduces output ripple. It achieves up to 90% efficiency, minimizing power loss and extending battery life. The device also features a low quiescent current of 17uA, making it suitable for always-on applications. Additionally, it includes spread-spectrum PWM frequency dithering to reduce electromagnetic interference (EMI), a critical feature for noise-sensitive systems.
Technically, the TPS826711 is based on a high-frequency synchronous step-down topology, using both high-side and low-side MOSFETs to achieve high efficiency. The integrated inductor and capacitors are co-packaged in the MicroSiP, ensuring predictable performance and reducing parasitic effects. The device operates in power-save mode at light loads, further improving efficiency across the entire load range.
Typical applications include powering microcontrollers, DSPs, and other digital ICs in battery-powered devices such as wearables, IoT sensors, and portable medical equipment. Its low noise and high efficiency also make it suitable for RF transceivers and audio codecs where clean power is essential.
When designing with the TPS826711, ensure adequate input and output decoupling as recommended in the datasheet. The power-save mode provides excellent light-load efficiency but may introduce output ripple; consider this trade-off in noise-sensitive applications.
Drop-in-Alternativen für TPS826711 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit TPS826711 (gleiche Bauform und Footprint) – abweichend in Input Voltage Range, Package, Switching Frequency.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
TPS826721SIPT
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TPS82676SIPT
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
TPS82674SIPT
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TPS82740A
⚡ Gleiches Gehäuse📋 Referenzalternative (nicht im Katalog)
TPS82085SILR
⚡ Gleiches Gehäuse✓ Auf Lager
$5.08 / Stück
Datenblatt ansehen →TPS826711 Grenzwerte & elektrische Eigenschaften
| Output Current | 600 mA |
| Ausgangsspannung | 1.8 V (fixed) |
| Eingangsspannungsbereich | 2.3 V to 4.8 V |
| Schaltfrequenz | 5.5 MHz (regulated) |
| Topologie | Synchronous step-down (buck) module |
| Ruhestrom | 17 uA |
| Peak Efficiency | 90% |
| EMI Reduction | Spread spectrum, PWM frequency dithering |
| Light-Load Mode | Power-save mode |
| Integrated Components | Switching regulator, inductor, input/output capacitors |
| External Components | None required |
| Gehäuse | MicroSiP, 8-pin uSIP |
| Profile Height | < 1.0 mm |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
TPS826711 Pin-Konfiguration
| Pin 1 | VIN — Power input, 2.3V to 4.8V |
| Pin 2 | GND — Ground |
| Pin 3 | EN — Enable input |
| Pin 4 | VOUT — Fixed 1.8V regulated output |
| Pin 5 | GND — Ground |
| Pin 6 | VOUT — Regulated output (parallel) |
| Pin 7 | GND — Ground / thermal |
| Pin 8 | NC/GND — Refer to datasheet pin table |
Typische Anwendungen
TPS826711 ist geeignet für 6 Anwendungs: Wearables and Smart Watches, IoT Sensor Nodes, RF Transceiver Power, Portable Medical Devices, Battery-Powered Audio, Point-of-Load for MCUs and DSPs.
Wearables and Smart Watches
The TPS826711 fits wearables because its <1.0mm profile MicroSiP package saves vertical space under display stacks, and its 17uA quiescent current preserves battery life during always-on standby. With a 2.3V-4.8V input it connects directly to a Li-ion cell and delivers a regulated 1.8V at up to 600mA for MCU and sensor rails. The 5.5MHz switching frequency keeps the integrated inductor tiny, and spread-spectrum dithering reduces interference with touch and wireless subsystems.
Empfohlen
IoT Sensor Nodes
Battery-powered IoT nodes benefit from the TPS826711's power-save mode, which maintains high efficiency from light standby loads up to the full 600mA during radio transmit bursts. The fully integrated design - regulator, inductor, and capacitors in one MicroSiP - removes magnetics selection and layout sensitivity, accelerating time-to-market for compact sensor boards. The 90% efficiency at 5.5MHz operation extends coin-cell or Li-ion runtime, while the fixed 1.8V output directly powers low-voltage logic and MCUs.
Empfohlen
RF Transceiver Power
The TPS826711's fixed 5.5MHz regulated frequency and spread-spectrum PWM dithering keep switching harmonics out of sensitive RF bands, making it a good fit for transceiver supply rails. The 600mA rating covers typical transmit-burst currents of short-range radios, and power-save mode sustains efficiency during idle receive periods. Because the inductor and capacitors are integrated, radiated loop area is minimized versus discrete solutions, lowering EMI risk in dense wireless designs such as Zigbee and BLE modules.
Empfohlen
Portable Medical Devices
Portable diagnostic and monitoring equipment uses the TPS826711 to convert a Li-ion battery rail to a clean, fixed 1.8V for low-voltage digital ICs. The high 90% efficiency reduces heat in sealed enclosures, and the fully integrated MicroSiP shortens qualification because magnetics variation is eliminated. Low 17uA quiescent current matters for devices that spend most of the day in standby. The <1.0mm profile suits handheld form factors where board space and height are constrained.
Empfohlen
Battery-Powered Audio
The low-noise TPS826711 supplies 1.8V digital rails for codecs and audio DSPs in Bluetooth headsets and portable recorders. Spread-spectrum frequency dithering spreads switching noise, reducing audible tonal artifacts, while power-save mode keeps efficiency high during quiet playback periods. The integrated input and output capacitance simplify layout in tightly packed acoustical enclosures, and the 600mA capability covers codec plus wireless combo current peaks without a second converter.
Empfohlen
Point-of-Load for MCUs and DSPs
As a complete point-of-load solution, the TPS826711 steps a 2.3V-4.8V intermediate rail down to a fixed 1.8V core or I/O supply for microcontrollers and low-power DSPs such as the C2000 family in portable instruments. The 5.5MHz operation delivers fast transient response to load steps, and the fully integrated module guarantees consistent performance across builds, avoiding inductor sourcing variance. No external components are required, shrinking BOM count on high-volume boards.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für TPS826711 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | TPS826721SIPT | TPS82676SIPT | TPS82674SIPT | TPS82740A | TPS82085SILR |
|---|---|---|---|---|---|---|
| Package | MicroSiP 8-pin uSIP | MicroSiP 8-pin uSIP - same | MicroSiP 8-pin uSIP - same | MicroSiP 8-pin uSIP - same | MicroSiP (similar family) | MicroSiP (larger footprint) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | |
| Output Voltage | 1.8 V fixed | Different fixed VOUT | Different fixed VOUT | Different fixed VOUT | Step-down, VOUT-selectable | Adjustable 0.8V-6V |
Wichtigste Unterscheidungsmerkmale
- Zero external components required (vs. TPS82085SILR)
- 17uA quiescent current for always-on loads (vs. TPS826721SIPT)
- Sub-1.0mm profile MicroSiP integration (vs. TPS82740A)
Designhinweise
Although the TPS826711 integrates the inductor and capacitors, PCB layout still matters: place the module directly across the load, keep the VIN trace short and wide, and provide a solid ground plane under the MicroSiP terminals. Per TI datasheet layout guidance, minimize loop area between the module GND and system GND to contain the 5.5MHz switching currents and reduce radiated EMI in wireless designs.
Verify the input source can deliver peak currents. At 90% efficiency with 1.8V/600mA output from a 3.7V battery, input current averages roughly 320mA, but synchronous buck switching draws pulsed input current at 5.5MHz. If the input rail has long, thin traces, add a small local ceramic capacitor near VIN even though the module has integrated input capacitance, per TI application recommendations.
Do not exceed the 4.8V maximum input - a USB 5V rail directly violates the rating; use a stage between USB and this module. Also note that in power-save mode, output ripple increases at light loads; for noise-critical RF PLL supplies, evaluate forcing continuous-conduction operation or adding an LC post-filter. Respect the MSL rating and IPC reflow limits (2-3 reflow cycles maximum).
Compliance-Informationen
RoHS compliant per TI product page; exact REACH/halogen status and MSL rating should be confirmed from TI quality portal for the specific ordering code.
