TPS826711 - 600mA 1.8V MicroSiP Buck Module | Texas Instruments
Артикул: TPS826711 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $2.45 | $2,45 |
| 10 | $2.2 | $22,00 |
| 100 | $1.85 | $185,00 |
| 500 | $1.55 | $775,00 |
| 1.000 | $1.3 | $1.300,00 |
TPS826711 Обзор
A step-down converter, also known as a buck converter, is a type of DC-DC converter that steps down an input voltage to a lower output voltage while maintaining high efficiency. It is a fundamental building block in power management, converting a higher voltage rail to a lower one for powering digital ICs, sensors, and other loads. The TPS826711 belongs to the family of switching regulators, which are more efficient than linear regulators for large voltage differences, making them essential in battery-powered devices where power conservation is critical.
Key features include a regulated 5.5MHz switching frequency, which allows tiny external components and reduces output ripple. It achieves up to 90% efficiency, minimizing power loss and extending battery life. The device also features a low quiescent current of 17uA, making it suitable for always-on applications. Additionally, it includes spread-spectrum PWM frequency dithering to reduce electromagnetic interference (EMI), a critical feature for noise-sensitive systems.
Technically, the TPS826711 is based on a high-frequency synchronous step-down topology, using both high-side and low-side MOSFETs to achieve high efficiency. The integrated inductor and capacitors are co-packaged in the MicroSiP, ensuring predictable performance and reducing parasitic effects. The device operates in power-save mode at light loads, further improving efficiency across the entire load range.
Typical applications include powering microcontrollers, DSPs, and other digital ICs in battery-powered devices such as wearables, IoT sensors, and portable medical equipment. Its low noise and high efficiency also make it suitable for RF transceivers and audio codecs where clean power is essential.
When designing with the TPS826711, ensure adequate input and output decoupling as recommended in the datasheet. The power-save mode provides excellent light-load efficiency but may introduce output ripple; consider this trade-off in noise-sensitive applications.
Аналоги без доработки для TPS826711 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с TPS826711 (тот же форм-фактор и посадочное место) — отличается по Input Voltage Range, Package, Switching Frequency.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
TPS826721SIPT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TPS82676SIPT
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
TPS82674SIPT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TPS82740A
⚡ Тот же корпус📋 Справочный аналог (нет в каталоге)
TPS82085SILR
⚡ Тот же корпус✓ В наличии
$5.08 / шт.
Открыть даташит →TPS826711 Максимальные параметры и электрические характеристики
| Output Current | 600 mA |
| Выходное напряжение | 1.8 V (fixed) |
| Диапазон входного напряжения | 2.3 V to 4.8 V |
| Частота переключения | 5.5 MHz (regulated) |
| Топология | Synchronous step-down (buck) module |
| Ток покоя | 17 uA |
| Peak Efficiency | 90% |
| EMI Reduction | Spread spectrum, PWM frequency dithering |
| Light-Load Mode | Power-save mode |
| Integrated Components | Switching regulator, inductor, input/output capacitors |
| External Components | None required |
| Корпус | MicroSiP, 8-pin uSIP |
| Profile Height | < 1.0 mm |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
Конфигурация выводов TPS826711
| Контакт 1 | VIN — Power input, 2.3V to 4.8V |
| Контакт 2 | GND — Ground |
| Контакт 3 | EN — Enable input |
| Контакт 4 | VOUT — Fixed 1.8V regulated output |
| Контакт 5 | GND — Ground |
| Контакт 6 | VOUT — Regulated output (parallel) |
| Контакт 7 | GND — Ground / thermal |
| Контакт 8 | NC/GND — Refer to datasheet pin table |
Типичное применение
TPS826711 подходит для 6 применениеs: Wearables and Smart Watches, IoT Sensor Nodes, RF Transceiver Power, Portable Medical Devices, Battery-Powered Audio, Point-of-Load for MCUs and DSPs.
Wearables and Smart Watches
The TPS826711 fits wearables because its <1.0mm profile MicroSiP package saves vertical space under display stacks, and its 17uA quiescent current preserves battery life during always-on standby. With a 2.3V-4.8V input it connects directly to a Li-ion cell and delivers a regulated 1.8V at up to 600mA for MCU and sensor rails. The 5.5MHz switching frequency keeps the integrated inductor tiny, and spread-spectrum dithering reduces interference with touch and wireless subsystems.
Рекомендуется
IoT Sensor Nodes
Battery-powered IoT nodes benefit from the TPS826711's power-save mode, which maintains high efficiency from light standby loads up to the full 600mA during radio transmit bursts. The fully integrated design - regulator, inductor, and capacitors in one MicroSiP - removes magnetics selection and layout sensitivity, accelerating time-to-market for compact sensor boards. The 90% efficiency at 5.5MHz operation extends coin-cell or Li-ion runtime, while the fixed 1.8V output directly powers low-voltage logic and MCUs.
Рекомендуется
RF Transceiver Power
The TPS826711's fixed 5.5MHz regulated frequency and spread-spectrum PWM dithering keep switching harmonics out of sensitive RF bands, making it a good fit for transceiver supply rails. The 600mA rating covers typical transmit-burst currents of short-range radios, and power-save mode sustains efficiency during idle receive periods. Because the inductor and capacitors are integrated, radiated loop area is minimized versus discrete solutions, lowering EMI risk in dense wireless designs such as Zigbee and BLE modules.
Рекомендуется
Portable Medical Devices
Portable diagnostic and monitoring equipment uses the TPS826711 to convert a Li-ion battery rail to a clean, fixed 1.8V for low-voltage digital ICs. The high 90% efficiency reduces heat in sealed enclosures, and the fully integrated MicroSiP shortens qualification because magnetics variation is eliminated. Low 17uA quiescent current matters for devices that spend most of the day in standby. The <1.0mm profile suits handheld form factors where board space and height are constrained.
Рекомендуется
Battery-Powered Audio
The low-noise TPS826711 supplies 1.8V digital rails for codecs and audio DSPs in Bluetooth headsets and portable recorders. Spread-spectrum frequency dithering spreads switching noise, reducing audible tonal artifacts, while power-save mode keeps efficiency high during quiet playback periods. The integrated input and output capacitance simplify layout in tightly packed acoustical enclosures, and the 600mA capability covers codec plus wireless combo current peaks without a second converter.
Рекомендуется
Point-of-Load for MCUs and DSPs
As a complete point-of-load solution, the TPS826711 steps a 2.3V-4.8V intermediate rail down to a fixed 1.8V core or I/O supply for microcontrollers and low-power DSPs such as the C2000 family in portable instruments. The 5.5MHz operation delivers fast transient response to load steps, and the fully integrated module guarantees consistent performance across builds, avoiding inductor sourcing variance. No external components are required, shrinking BOM count on high-volume boards.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для TPS826711 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | TPS826721SIPT | TPS82676SIPT | TPS82674SIPT | TPS82740A | TPS82085SILR |
|---|---|---|---|---|---|---|
| Package | MicroSiP 8-pin uSIP | MicroSiP 8-pin uSIP - same | MicroSiP 8-pin uSIP - same | MicroSiP 8-pin uSIP - same | MicroSiP (similar family) | MicroSiP (larger footprint) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | |
| Output Voltage | 1.8 V fixed | Different fixed VOUT | Different fixed VOUT | Different fixed VOUT | Step-down, VOUT-selectable | Adjustable 0.8V-6V |
Ключевые отличия
- Zero external components required (против TPS82085SILR)
- 17uA quiescent current for always-on loads (против TPS826721SIPT)
- Sub-1.0mm profile MicroSiP integration (против TPS82740A)
Заметки по проектированию
Although the TPS826711 integrates the inductor and capacitors, PCB layout still matters: place the module directly across the load, keep the VIN trace short and wide, and provide a solid ground plane under the MicroSiP terminals. Per TI datasheet layout guidance, minimize loop area between the module GND and system GND to contain the 5.5MHz switching currents and reduce radiated EMI in wireless designs.
Verify the input source can deliver peak currents. At 90% efficiency with 1.8V/600mA output from a 3.7V battery, input current averages roughly 320mA, but synchronous buck switching draws pulsed input current at 5.5MHz. If the input rail has long, thin traces, add a small local ceramic capacitor near VIN even though the module has integrated input capacitance, per TI application recommendations.
Do not exceed the 4.8V maximum input - a USB 5V rail directly violates the rating; use a stage between USB and this module. Also note that in power-save mode, output ripple increases at light loads; for noise-critical RF PLL supplies, evaluate forcing continuous-conduction operation or adding an LC post-filter. Respect the MSL rating and IPC reflow limits (2-3 reflow cycles maximum).
Информация о соответствии
RoHS compliant per TI product page; exact REACH/halogen status and MSL rating should be confirmed from TI quality portal for the specific ordering code.
