XC7Z045-1FFG900C - Dual Cortex-A9 Zynq-7000 SoC | AMD
Teilenummer: XC7Z045-1FFG900C ✓ AktivXC7Z045-1FFG900C Übersicht
A Zynq-7000 SoC is a programmable logic device combined with one or more Arm processors. The processor subsystem executes operating systems and application software, while the FPGA fabric implements parallel hardware, high-speed interfaces, and custom accelerators. This hierarchy places the device among FPGA and CPLD solutions, adaptive SoCs, and programmable semiconductor devices. Compared with a separate processor and FPGA, the integrated Zynq architecture can simplify data exchange and shorten the path between software-controlled functions and hardware logic.
The XC7Z045 provides 350K logic cells, dual Arm Cortex-A9 cores, and CoreSight support. The 667 MHz processor rating supports embedded Linux and bare-metal software workloads, while the Kintex-7-class programmable logic supports parallel data processing, protocol handling, and custom accelerators. The 900-FCBGA package provides a large pin count for high-performance I/O and memory connectivity, although its fine pitch and thermal requirements make careful PCB design essential.
The XC7Z045-1FFG900C belongs to the Zynq-7000 SoC family identified in the AMD DS191 product family document. Its “-1” speed designation, “FFG900” package designation, and “C” suffix identify the ordered device configuration. The 31 x 31 mm FCBGA is a surface-mount package, so the PCB must provide the full land pattern, power distribution, decoupling, and thermal-relief features specified by AMD.
Typical uses include industrial machine vision, networked industrial control, test and measurement, communications infrastructure, high-resolution display processing, and embedded vision systems. In each case, the Arm subsystem can manage control software while the FPGA fabric handles deterministic data acquisition, image processing, protocol conversion, or high-speed parallel interfaces. Development requires FPGA-design software for the logic fabric and an embedded software toolchain for the Arm subsystem.
Design the power rails for both processor and FPGA requirements, including transient response and sequencing. Place high-frequency decoupling capacitors close to the supply and ground balls, preserve the AMD-recommended ball-grid land pattern, and provide thermal paths through the PCB. Because a 900-FCBGA package has many fine-pitch balls, inspect the assembled board for solder bridging and verify power rails before enabling the programmable logic.
This page combines the verified Zynq-7000 device identity and package information with practical design guidance, qualified same-footprint alternatives, application-specific engineering notes, and a parameter comparison for faster procurement and design decisions.
Drop-in-Alternativen für XC7Z045-1FFG900C – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XC7Z045-1FFG900C (gleiche Bauform und Footprint).
XC7Z045-1FFG900I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z045-1FFG900E
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XC7Z045-2FFG900C
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XC7Z045-2FFG900E
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XC7Z045-1FFG900C Grenzwerte & elektrische Eigenschaften
| Device Type | Zynq-7000 system-on-chip |
| Processor Core | Dual Arm Cortex-A9 MPCore |
| Processor Frequency | 667 MHz |
| FPGA Family | Kintex-7 |
| Logic Cells | 350K |
| Debug Capability | CoreSight |
| Package Type | 900-FCBGA |
| Package Dimensions | 31 x 31 mm |
| Montageart | Surface mount |
| Architecture | Zynq-7000 SoC first-generation architecture |
| FPGA Resource Count | 350K logic cells |
| Processor Configuration | 2 cores |
| Programmable Logic Type | Kintex-7 FPGA fabric |
XC7Z045-1FFG900C 31 x 31 mm Pinbelegungsleitfaden
Pinbelegung für XC7Z045-1FFG900C (31 x 31 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XC7Z045-1FFG900C.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XC7Z045-1FFG900C ist geeignet für 6 Anwendungs: Industrial Machine Vision, High-Speed Network Equipment, Test and Measurement Instrumentation, Industrial Control Systems, Communications and Protocol Conversion, High-Resolution Display Processing.
Industrial Machine Vision
The XC7Z045-1FFG900C fits machine-vision controllers that require high-throughput parallel pixel processing alongside conventional control software. Its dual 667 MHz Arm Cortex-A9 cores can manage camera configuration, exposure control, networking, and system supervision, while the 350K-cell Kintex-7 FPGA fabric can accelerate filtering, color conversion, feature extraction, or interface translation. Keeping these functions in one SoC reduces the data path between image acquisition and processing. The 900-FCBGA footprint also provides extensive ball connectivity for memory and high-speed I/O, but the PCB must implement careful ball-by-ball escape routing, multilayer power distribution, and thermal management.
Empfohlen
High-Speed Network Equipment
The XC7Z045-1FFG900C is suitable for packet-processing and network-interface equipment where programmable logic handles line-rate framing, buffering, and protocol adaptation while the Cortex-A9 cores manage configuration and higher-level control. The 350K FPGA logic-cell resource and 900-ball package support substantial I/O and external-memory connectivity, which is useful for high-throughput designs. Engineers can partition time-critical datapaths into fabric for deterministic behavior and reserve the processor subsystem for management functions. Deployment still requires careful DDR layout, constrained clock distribution, isolated power domains where appropriate, and thermal testing at the system's worst-case processor and I/O activity.
Empfohlen
Test and Measurement Instrumentation
The XC7Z045-1FFG900C can divide instrument tasks between deterministic FPGA logic and embedded Arm software. Acquisition pipelines, trigger logic, waveform formatting, and data compression can be implemented in programmable logic, while the processor subsystem controls the instrument, runs the user interface, performs calibration, and transfers results. The 667 MHz dual-core configuration provides software capacity without requiring a separate processor for basic control. Because laboratory equipment often combines sensitive analog circuitry with dense digital logic, the implementation should isolate supply paths, route clocks deliberately, synchronize the processor and FPGA domains, and provide stable thermal conditions during calibration.
Empfohlen
Industrial Control Systems
The XC7Z045-1FFG900C fits programmable automation controllers that must coordinate real-time I/O with higher-level control functions. The Cortex-A9 subsystem can run operating-system software, communications, diagnostics, and configuration management, while the FPGA fabric can implement deterministic timing, motion-control loops, encoder interfaces, or safety-related signal conditioning within the assessed system architecture. Integrating both domains in the 900-FCBGA package provides a high pin count for fieldbus and external I/O. The power design should separate processor, auxiliary, memory, and I/O supply requirements, while the PCB needs uninterrupted thermal paths and a layout verified against AMD's package requirements.
Empfohlen
Communications and Protocol Conversion
The XC7Z045-1FFG900C is appropriate for embedded protocol bridges and communications gateways because programmable logic can handle framing, serialization, buffering, and timing-sensitive interfaces in parallel. The two Arm Cortex-A9 cores can run network stacks, management services, telemetry, and configuration logic. This division of labor is useful when a standard processor would require heavy real-time intervention or when a standalone FPGA would need a separate control processor. The 900-ball package supports dense power and signal distribution, but engineers should use length-matched routes for high-speed interfaces, controlled reference planes, verified clock topology, and carefully defined reset and boot sequencing.
Empfohlen
High-Resolution Display Processing
The XC7Z045-1FFG900C can support display and video-processing systems that divide work between programmable pixel pipelines and software-controlled content management. The Kintex-7 fabric may perform scaler, deinterlace, color, timing, or interface-conversion functions, while the Cortex-A9 subsystem runs control code, updates configuration, and supervises external interfaces. With approximately 350K logic cells and a 900-FCBGA package, the device provides substantial programmable resources and extensive connectivity for memory and display interfaces. The board should route high-speed memory and video interfaces as controlled-impedance nets, maintain continuous return paths, isolate noisy clocks, and verify synchronization across processor and programmable-logic domains.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XC7Z045-1FFG900C – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC7Z045-1FFG900I | XC7Z045-1FFG900E | XC7Z045-2FFG900C | XC7Z045-2FFG900I | XC7Z045-2FFG900E |
|---|---|---|---|---|---|---|
| Package | 900-FCBGA (31 x 31 mm) | 900-FCBGA (31 x 31 mm) | 900-FCBGA (31 x 31 mm) | 900-FCBGA (31 x 31 mm) | 900-FCBGA (31 x 31 mm) | 900-FCBGA (31 x 31 mm) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| Processor Core | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore |
| Speed Designation | -1 | -1 | -1 | -2 | -2 | -2 |
| Logic Cells | 350K | 350K | 350K | 350K | 350K | 350K |
| Debug Capability | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
| Temperature and Order Suffix | C suffix at -1 speed grade | I suffix at -1 speed grade | E suffix at -1 speed grade | C suffix at -2 speed grade | I suffix at -2 speed grade | E suffix at -2 speed grade |
Wichtigste Unterscheidungsmerkmale
- Integrated processor and programmable-logic device (vs. XC7Z045-2FFG900C)
- High pin-count integration in a 31 x 31 mm package (vs. XC7Z045-1FFG900I)
- Lower-order speed configuration for continuity (vs. XC7Z045-2FFG900C)
- 350K-cell programmable fabric with dual-core processing (vs. XC7Z045-2FFG900E)
Designhinweise
The 900-FCBGA package concentrates processor and FPGA heat into a 31 x 31 mm area. Use the full AMD-recommended land pattern and provide thermal vias or other package-specific heat-spreading features beneath the device. Estimate worst-case dissipation from the actual processor load, FPGA utilization, I/O activity, ambient temperature, and board airflow; do not derive production thermal margins from nominal processor speed alone.
Implement the complete 900-ball land pattern, including power, ground, signal, and configuration balls. Follow AMD's package drawing for ball location, solder-mask definition, paste stencil, and assembly tolerances. Escape high-speed routes through multiple PCB layers where required, preserve uninterrupted reference planes beneath high-speed nets, and inspect fine-pitch solder joints for bridging after assembly.
Treat processor, auxiliary, FPGA core, I/O, and memory supplies as separate design domains until the AMD power guidance establishes their permitted topology. Estimate both average and worst-case current, including transient load steps, and include regulator headroom for startup and activity changes. Place bulk and high-frequency decoupling close to the associated package balls, and verify rail sequencing and voltage tolerances before enabling the design.
Route processor, DDR, and other high-speed interfaces as controlled-impedance nets with continuous reference planes and minimal return-path discontinuities. Define clock topology carefully, constrain the relevant interfaces, and validate the final stack-up rather than relying on nominal board material assumptions. If the programmable logic and processor operate in separate clock domains, use the AMD-recommended reset and clocking architecture to establish deterministic startup.
Avoid selecting a substitute solely because it has the same XC7Z045 base number and FFG900 package. The -1 versus -2 speed designation and C, I, or E suffix can change ordering, temperature, qualification, or lifecycle requirements. Review the exact AMD product record, confirm the required operating range, and rebuild or revalidate timing-sensitive designs before introducing a different ordered suffix.
Compliance-Informationen
The exact-MPN material and environmental declarations were not stated. AEC-Q100 is not applicable to the standard C-suffix device because it is not identified as an automotive-qualified ordered variant.