AMD

XC7Z045-1FFG900C - Dual Cortex-A9 Zynq-7000 SoC | AMD

部品番号: XC7Z045-1FFG900C ✓ 生産中
900-FCBGA Package 667 MHz Speed
MOQ: 1 |

XC7Z045-1FFG900C 概要

The AMD XC7Z045-1FFG900C is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core Arm Cortex-A9 processor with CoreSight debug capability and approximately 350,000 FPGA logic cells. The device operates at 667 MHz and is packaged in a 900-ball FCBGA measuring 31 x 31 mm. Its integrated architecture allows software-controlled applications and programmable logic to share DDR memory, peripherals, and I/O resources.

A Zynq-7000 SoC is a programmable logic device combined with one or more Arm processors. The processor subsystem executes operating systems and application software, while the FPGA fabric implements parallel hardware, high-speed interfaces, and custom accelerators. This hierarchy places the device among FPGA and CPLD solutions, adaptive SoCs, and programmable semiconductor devices. Compared with a separate processor and FPGA, the integrated Zynq architecture can simplify data exchange and shorten the path between software-controlled functions and hardware logic.

The XC7Z045 provides 350K logic cells, dual Arm Cortex-A9 cores, and CoreSight support. The 667 MHz processor rating supports embedded Linux and bare-metal software workloads, while the Kintex-7-class programmable logic supports parallel data processing, protocol handling, and custom accelerators. The 900-FCBGA package provides a large pin count for high-performance I/O and memory connectivity, although its fine pitch and thermal requirements make careful PCB design essential.

The XC7Z045-1FFG900C belongs to the Zynq-7000 SoC family identified in the AMD DS191 product family document. Its “-1” speed designation, “FFG900” package designation, and “C” suffix identify the ordered device configuration. The 31 x 31 mm FCBGA is a surface-mount package, so the PCB must provide the full land pattern, power distribution, decoupling, and thermal-relief features specified by AMD.

Typical uses include industrial machine vision, networked industrial control, test and measurement, communications infrastructure, high-resolution display processing, and embedded vision systems. In each case, the Arm subsystem can manage control software while the FPGA fabric handles deterministic data acquisition, image processing, protocol conversion, or high-speed parallel interfaces. Development requires FPGA-design software for the logic fabric and an embedded software toolchain for the Arm subsystem.

Design the power rails for both processor and FPGA requirements, including transient response and sequencing. Place high-frequency decoupling capacitors close to the supply and ground balls, preserve the AMD-recommended ball-grid land pattern, and provide thermal paths through the PCB. Because a 900-FCBGA package has many fine-pitch balls, inspect the assembled board for solder bridging and verify power rails before enabling the programmable logic.

This page combines the verified Zynq-7000 device identity and package information with practical design guidance, qualified same-footprint alternatives, application-specific engineering notes, and a parameter comparison for faster procurement and design decisions.

ドロップイン代替品: XC7Z045-1FFG900C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: XC7Z045-1FFG900C (同一形状・フットプリント).

XC7Z045-1FFG900I

✅ ドロップイン
AMD
📦 900-FCBGA (31 x 31 mm)
Dual ARM Cortex-A9 MPCore with CoreSight · 667 MHz · 350K · 900-FCBGA (31x31 mm) · Surface Mount · Industrial (-40C to +100C) · -1 · Kintex-7

価格はお問い合わせください

データシートを見る →

XC7Z045-1FFG900E

✅ ドロップイン
📦 900-FCBGA (31 x 31 mm)
Same Zynq-7000 device and 900-FCBGA footprint; the E suffix identifies a different ordered grade, while speed remains at the -1 level

📋 参考代替品(カタログ未掲載)

XC7Z045-2FFG900C

✅ ドロップイン
📦 900-FCBGA (31 x 31 mm)
Same Zynq-7000 architecture and 900-FCBGA footprint; the -2 grade is one speed level above the target's -1 grade

📋 参考代替品(カタログ未掲載)

XC7Z045-2FFG900I

✅ ドロップイン
📦 900-FCBGA (31 x 31 mm)
互換仕様

価格はお問い合わせください

XC7Z045-2FFG900E

✅ ドロップイン
📦 900-FCBGA (31 x 31 mm)
Same Zynq-7000 device and 900-FCBGA footprint; the -2 speed grade is higher and the E suffix identifies a different ordered grade

📋 参考代替品(カタログ未掲載)

XC7Z045-1FFG900C 最大定格&電気的特性

Device Type Zynq-7000 system-on-chip
Processor Core Dual Arm Cortex-A9 MPCore
Processor Frequency 667 MHz
FPGA Family Kintex-7
Logic Cells 350K
Debug Capability CoreSight
Package Type 900-FCBGA
Package Dimensions 31 x 31 mm
実装タイプ Surface mount
Architecture Zynq-7000 SoC first-generation architecture
FPGA Resource Count 350K logic cells
Processor Configuration 2 cores
Programmable Logic Type Kintex-7 FPGA fabric

XC7Z045-1FFG900C 31 x 31 mm ピン配置ガイド

XC7Z045-1FFG900C (31 x 31 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

XC7Z045-1FFG900C の 31 x 31 mm パッケージピン配置図

詳細なピン配置データはありません: XC7Z045-1FFG900C.

詳細は データシート をご参照ください。

主な用途

XC7Z045-1FFG900C の用途: 6 件s: Industrial Machine Vision, High-Speed Network Equipment, Test and Measurement Instrumentation, Industrial Control Systems, Communications and Protocol Conversion, High-Resolution Display Processing.

🏭

Industrial Machine Vision

The XC7Z045-1FFG900C fits machine-vision controllers that require high-throughput parallel pixel processing alongside conventional control software. Its dual 667 MHz Arm Cortex-A9 cores can manage camera configuration, exposure control, networking, and system supervision, while the 350K-cell Kintex-7 FPGA fabric can accelerate filtering, color conversion, feature extraction, or interface translation. Keeping these functions in one SoC reduces the data path between image acquisition and processing. The 900-FCBGA footprint also provides extensive ball connectivity for memory and high-speed I/O, but the PCB must implement careful ball-by-ball escape routing, multilayer power distribution, and thermal management.

🌐

High-Speed Network Equipment

The XC7Z045-1FFG900C is suitable for packet-processing and network-interface equipment where programmable logic handles line-rate framing, buffering, and protocol adaptation while the Cortex-A9 cores manage configuration and higher-level control. The 350K FPGA logic-cell resource and 900-ball package support substantial I/O and external-memory connectivity, which is useful for high-throughput designs. Engineers can partition time-critical datapaths into fabric for deterministic behavior and reserve the processor subsystem for management functions. Deployment still requires careful DDR layout, constrained clock distribution, isolated power domains where appropriate, and thermal testing at the system's worst-case processor and I/O activity.

🔧

Test and Measurement Instrumentation

The XC7Z045-1FFG900C can divide instrument tasks between deterministic FPGA logic and embedded Arm software. Acquisition pipelines, trigger logic, waveform formatting, and data compression can be implemented in programmable logic, while the processor subsystem controls the instrument, runs the user interface, performs calibration, and transfers results. The 667 MHz dual-core configuration provides software capacity without requiring a separate processor for basic control. Because laboratory equipment often combines sensitive analog circuitry with dense digital logic, the implementation should isolate supply paths, route clocks deliberately, synchronize the processor and FPGA domains, and provide stable thermal conditions during calibration.

🏭

Industrial Control Systems

The XC7Z045-1FFG900C fits programmable automation controllers that must coordinate real-time I/O with higher-level control functions. The Cortex-A9 subsystem can run operating-system software, communications, diagnostics, and configuration management, while the FPGA fabric can implement deterministic timing, motion-control loops, encoder interfaces, or safety-related signal conditioning within the assessed system architecture. Integrating both domains in the 900-FCBGA package provides a high pin count for fieldbus and external I/O. The power design should separate processor, auxiliary, memory, and I/O supply requirements, while the PCB needs uninterrupted thermal paths and a layout verified against AMD's package requirements.

📡

Communications and Protocol Conversion

The XC7Z045-1FFG900C is appropriate for embedded protocol bridges and communications gateways because programmable logic can handle framing, serialization, buffering, and timing-sensitive interfaces in parallel. The two Arm Cortex-A9 cores can run network stacks, management services, telemetry, and configuration logic. This division of labor is useful when a standard processor would require heavy real-time intervention or when a standalone FPGA would need a separate control processor. The 900-ball package supports dense power and signal distribution, but engineers should use length-matched routes for high-speed interfaces, controlled reference planes, verified clock topology, and carefully defined reset and boot sequencing.

📺

High-Resolution Display Processing

The XC7Z045-1FFG900C can support display and video-processing systems that divide work between programmable pixel pipelines and software-controlled content management. The Kintex-7 fabric may perform scaler, deinterlace, color, timing, or interface-conversion functions, while the Cortex-A9 subsystem runs control code, updates configuration, and supervises external interfaces. With approximately 350K logic cells and a 900-FCBGA package, the device provides substantial programmable resources and extensive connectivity for memory and display interfaces. The board should route high-speed memory and video interfaces as controlled-impedance nets, maintain continuous return paths, isolate noisy clocks, and verify synchronization across processor and programmable-logic domains.

What is the AMD XC7Z045-1FFG900C?
The AMD XC7Z045-1FFG900C is a Zynq-7000 system-on-chip combining a dual-core Arm Cortex-A9 processor with a Kintex-7 FPGA fabric. According to AMD product information, it provides 350K logic cells, a 667 MHz processor configuration, CoreSight debug support, and a 900-FCBGA package measuring 31 x 31 mm. It is designed for embedded systems that need both programmable hardware and a software-processing subsystem.
What are the key specifications of XC7Z045-1FFG900C?
The XC7Z045-1FFG900C combines two Arm Cortex-A9 cores, approximately 350K FPGA logic cells, CoreSight debug support, and a 667 MHz processor rating. The device is identified in AMD documentation as a Zynq-7000 Kintex-7 SoC and is supplied in a 900-FCBGA package measuring 31 x 31 mm. Its primary engineering appeal is the combination of a general-purpose processor subsystem and programmable logic within one device.
Where can I download the XC7Z045-1FFG900C datasheet PDF?
The XC7Z045-1FFG900C datasheet can be downloaded from the AMD documentation site through the DS191 Zynq-7000 product-family document. The document covers the XC7Z030, XC7Z035, and XC7Z045 devices and their common DC, AC, package, and electrical characteristics. Use the manufacturer PDF for authoritative pin, power, timing, and package information and the AMD package-pinout resource when assigning board-level connections.
Where can I find the XC7Z045-1FFG900C pinout?
The XC7Z045-1FFG900C pinout is available through AMD's Zynq-7000 Package Device Pinout Files resource and the DS191 product-family document. The component uses a 900-ball FCBGA footprint, so engineers should verify every ball assignment against the specific XC7Z045-1FFG900C package table rather than relying only on a generic Zynq diagram. The package contains 900 balls, but their functions depend on the exact device and package variant.
What can replace the XC7Z045-1FFG900C?
The XC7Z045-1FFG900I, XC7Z045-1FFG900E, XC7Z045-2FFG900C, XC7Z045-2FFG900I, and XC7Z045-2FFG900E are same-package Zynq-7000 alternatives with the 900-FCBGA footprint. Their differences involve speed grade and temperature or product suffix. A replacement should be selected only after confirming that the required operating-temperature range, processor speed, lifecycle target, and exact device configuration meet the original design requirements.
Is XC7Z045-1FFG900C the same as XC7Z045-2FFG900C?
The XC7Z045-1FFG900C and XC7Z045-2FFG900C use the same Zynq-7000 architecture, 900-FCBGA package, 350K logic-cell configuration, and dual Arm Cortex-A9 processor structure. Their principal ordering distinction is the speed designation: “-1” corresponds to the lower performance grade, while “-2” identifies the higher speed grade. A “-2” device can fit the same package mechanically, but firmware timing and performance assumptions should be reviewed before substitution.
XC7Z045-1FFG900C vs XC7Z045-2FFG900C: which is better for industrial control?
The XC7Z045-2FFG900C is generally preferable when processing throughput is the priority because it carries the higher “-2” speed designation. The XC7Z045-1FFG900C may be appropriate when the original design was validated around the lower speed grade, cost is the leading constraint, or the higher grade does not provide a useful system benefit. The correct choice must also include the required temperature grade and qualification environment.
When should I choose XC7Z045-1FFG900C instead of a faster Zynq-7000 option?
Choose the XC7Z045-1FFG900C when its established software image, timing behavior, and lower speed grade satisfy the product requirements and a higher grade offers no meaningful benefit. It can simplify continuity for an existing design because the processor, 350K logic-cell resource configuration, and 900-FCBGA format remain part of the same Zynq-7000 device family. Validate operating temperature and lifecycle requirements before committing to any ordered suffix.
Is the XC7Z045-1FFG900C suitable for embedded industrial control?
The XC7Z045-1FFG900C is suitable for embedded industrial control when the design benefits from both a software processor and dedicated programmable logic. The dual Arm Cortex-A9 subsystem can run control software, while the 350K-cell Kintex-7 fabric can implement deterministic interfaces, protocol handling, or parallel processing. Industrial suitability must also be established against the required temperature range, environmental qualification, and long-term supply expectations.
Where can I buy XC7Z045-1FFG900C online?
The AMD XC7Z045-1FFG900C can be requested through the Request a Quote form on this page. Quote requests should identify the exact MPN, required quantity, target delivery date, and permitted packing method. Because availability and commercial terms for large programmable devices can change, request a written confirmation of lead time, lifecycle status, and shipment condition before releasing a production purchase order.
What is the price of XC7Z045-1FFG900C?
The current commercial price for the XC7Z045-1FFG900C is obtained through the Request a Quote form on this page. The form allows buyers to specify quantity and obtain an offer appropriate to the requested lot size rather than relying on an outdated catalog value. For production planning, also request a lead-time estimate, minimum order quantity, and availability confirmation before budgeting the component.
What is the lead time for XC7Z045-1FFG900C?
The current lead time for the XC7Z045-1FFG900C should be confirmed through the Request a Quote form on this page. Lead time can depend on lot quantity, device availability, and the delivery schedule requested, so a procurement acknowledgment is more useful than a generic market estimate. For production builds, request written confirmation of allocation, expected shipment date, and any traceability requirements.
Is XC7Z045-1FFG900C in stock?
Stock for the XC7Z045-1FFG900C is confirmed through the Request a Quote form on this page. The form supports a quantity-specific availability response and is more appropriate than treating a distributor search result as a guaranteed allocation. Include the required delivery date in the request so the response can distinguish immediate supply from scheduled production or back-order handling.
How much power does the XC7Z045-1FFG900C require?
The XC7Z045-1FFG900C requires a multi-rail power supply, but a single fixed power figure cannot be assigned without the selected processor speed, utilization, I/O state, and operating temperature. Use the DS191 Zynq-7000 document and AMD power-estimation tools for the intended design. Budget regulator capacity for processor, FPGA core, auxiliary, I/O, and memory rails while including transient margin.
What software tools support the XC7Z045-1FFG900C?
The XC7Z045-1FFG900C is supported by AMD's programmable-logic development flow for the Kintex-7 fabric and an Arm software toolchain for the Cortex-A9 subsystem. Exact tool releases and device support should be selected through current AMD tooling. Engineers must also account for the device's 900-FCBGA package, DDR memory implementation, boot configuration, and programmable-logic bitstream during board bring-up.
What is the best AMD equivalent for the XC7Z045-1FFG900C?
The closest same-footprint AMD options are the other XC7Z045 devices ordered in the 900-FCBGA package, including XC7Z045-1FFG900I, XC7Z045-1FFG900E, XC7Z045-2FFG900C, XC7Z045-2FFG900I, and XC7Z045-2FFG900E. These preserve the 900-ball mechanical interface but differ in speed grade and suffix. Verify temperature grade, qualification needs, device ID behavior, and software timing before treating any of them as a replacement.
Is XC7Z045-1FFG900C RoHS compliant?
The RoHS status of the XC7Z045-1FFG900C must be confirmed for the exact ordered configuration through AMD's product compliance documentation. The device is identified in AMD documentation as a Zynq-7000 SoC, but that device-family information alone does not establish every material-declaration requirement. Use the manufacturer compliance record for the exact MPN and the applicable BOM, rather than assuming that all devices in the family share the same declaration.

エンジニアリング参考データ: XC7Z045-1FFG900C — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the XC7Z045-1FFG900C when an existing Zynq-7000 design requires the 350K-cell Kintex-7 fabric, dual Arm Cortex-A9 processor subsystem, 667 MHz operating class, and 900-FCBGA footprint, and the -1 speed grade already meets the application's performance needs. Select XC7Z045-2FFG900C when the higher -2 speed grade improves processor or system throughput and the operating-temperature suffix remains acceptable. Use the I or E ordered variants only when their corresponding grade, qualification, environmental, or procurement requirements are confirmed for the target product. All five alternatives share the 900-ball mechanical package, so PCB changes are not expected, but changing speed grade or suffix can affect timing, thermal design, firmware configuration, and qualification. Validate the final selection against AMD's exact device record and the design's power, temperature, lifecycle, and software requirements.

代替品との比較

パラメータ この製品 XC7Z045-1FFG900I XC7Z045-1FFG900E XC7Z045-2FFG900C XC7Z045-2FFG900I XC7Z045-2FFG900E
Package 900-FCBGA (31 x 31 mm) 900-FCBGA (31 x 31 mm) 900-FCBGA (31 x 31 mm) 900-FCBGA (31 x 31 mm) 900-FCBGA (31 x 31 mm) 900-FCBGA (31 x 31 mm)
Brand AMD AMD AMD AMD AMD AMD
Device Family Zynq-7000 Zynq-7000 Zynq-7000 Zynq-7000 Zynq-7000 Zynq-7000
Processor Core Dual Arm Cortex-A9 MPCore Dual Arm Cortex-A9 MPCore Dual Arm Cortex-A9 MPCore Dual Arm Cortex-A9 MPCore Dual Arm Cortex-A9 MPCore Dual Arm Cortex-A9 MPCore
Speed Designation -1 -1 -1 -2 -2 -2
Logic Cells 350K 350K 350K 350K 350K 350K
Debug Capability CoreSight CoreSight CoreSight CoreSight CoreSight CoreSight
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount
Temperature and Order Suffix C suffix at -1 speed grade I suffix at -1 speed grade E suffix at -1 speed grade C suffix at -2 speed grade I suffix at -2 speed grade E suffix at -2 speed grade

主な差別化要因

  • Integrated processor and programmable-logic device (vs XC7Z045-2FFG900C)
  • High pin-count integration in a 31 x 31 mm package (vs XC7Z045-1FFG900I)
  • Lower-order speed configuration for continuity (vs XC7Z045-2FFG900C)
  • 350K-cell programmable fabric with dual-core processing (vs XC7Z045-2FFG900E)

設計ノート

The 900-FCBGA package concentrates processor and FPGA heat into a 31 x 31 mm area. Use the full AMD-recommended land pattern and provide thermal vias or other package-specific heat-spreading features beneath the device. Estimate worst-case dissipation from the actual processor load, FPGA utilization, I/O activity, ambient temperature, and board airflow; do not derive production thermal margins from nominal processor speed alone.

Implement the complete 900-ball land pattern, including power, ground, signal, and configuration balls. Follow AMD's package drawing for ball location, solder-mask definition, paste stencil, and assembly tolerances. Escape high-speed routes through multiple PCB layers where required, preserve uninterrupted reference planes beneath high-speed nets, and inspect fine-pitch solder joints for bridging after assembly.

Treat processor, auxiliary, FPGA core, I/O, and memory supplies as separate design domains until the AMD power guidance establishes their permitted topology. Estimate both average and worst-case current, including transient load steps, and include regulator headroom for startup and activity changes. Place bulk and high-frequency decoupling close to the associated package balls, and verify rail sequencing and voltage tolerances before enabling the design.

Route processor, DDR, and other high-speed interfaces as controlled-impedance nets with continuous reference planes and minimal return-path discontinuities. Define clock topology carefully, constrain the relevant interfaces, and validate the final stack-up rather than relying on nominal board material assumptions. If the programmable logic and processor operate in separate clock domains, use the AMD-recommended reset and clocking architecture to establish deterministic startup.

Avoid selecting a substitute solely because it has the same XC7Z045 base number and FFG900 package. The -1 versus -2 speed designation and C, I, or E suffix can change ordering, temperature, qualification, or lifecycle requirements. Review the exact AMD product record, confirm the required operating range, and rebuild or revalidate timing-sensitive designs before introducing a different ordered suffix.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The exact-MPN material and environmental declarations were not stated. AEC-Q100 is not applicable to the standard C-suffix device because it is not identified as an automotive-qualified ordered variant.

関連検索

xc7z045 2ffg900i xc7z045 1ffg900i xc7z045 2ffg676i xc7z045 1ffg676i xc7z045 ffg900 xc7z045 2ffg900e xc7z045 l2ffg900i xc7z045 2fbg676i xc7z045 2ffg900i datasheet xc7z045 3ffg900e XC7Z045-1FFG900C datasheet pdf XC7Z045-1FFG900C pinout XC7Z045-1FFG900C replacement XC7Z045-1FFG900C price AMD XC7Z045-1FFG900C

関連部品&用語

AMD XC7Z045-1FFG900C XC7Z045-1FFG900I XC7Z045-1FFG900E XC7Z045-2FFG900C XC7Z045-2FFG900I XC7Z045-2FFG900E Zynq-7000 Kintex-7 system-on-chip FPGA CPLD programmable logic Arm Cortex-A9 MPCore CoreSight 667 MHz 350K logic cells 900-FCBGA 31 x 31 mm package surface mount DS191 embedded Linux machine vision industrial control programmable logic device
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示