XMC4400F100F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
料号: XMC4400F100F256BAXQMA1 ✓ 量产中XMC4400F100F256BAXQMA1 概述
An Arm Cortex-M4 microcontroller is a 32-bit embedded processor within the microcontroller and embedded-processing hierarchy. It executes control software, services digital inputs, drives outputs, and manages communication interfaces in equipment that requires deterministic real-time behavior. The XMC4400 combines that processor core with analog, timing, communications, and debugging peripherals intended to reduce external component count in industrial control designs.
Principal device attributes include a 120 MHz Cortex-M4 core, 256 KB program flash, 80 KB SRAM, and Ethernet support. The 150 ps PWM resolution supports precise pulse timing, while the 3.3 V device and industrial temperature designation align it with embedded industrial systems. Its PG-LQFP-100-25 package provides 100 leads and an exposed thermal pad for board-level heat spreading.
The XMC4400 integrates a broad peripheral set around the Cortex-M4 core, including Ethernet and a high-resolution PWM unit. Its memory arrangement provides 256 KB for firmware and 80 KB for working data, making it suitable for control loops, communication stacks, and application logic. The exact peripheral inventory and electrical limits for the selected ordering designation should be confirmed against the Infineon XMC4400 datasheet before schematic release.
Typical uses include industrial Ethernet controllers, programmable logic controllers, real-time human-machine interfaces, digital power conversion, motor-control front ends, and embedded signal-processing systems. Ethernet supports network-connected supervisory equipment, while deterministic PWM and timer resources support precise actuator control. The 120 MHz processing rate also allows control software and communications tasks to coexist without relying on a separate processor.
The most important layout consideration is thermal management around the exposed pad. Follow the manufacturer land-pattern and copper recommendations rather than treating the pad as an optional thermal feature. Decoupling, Ethernet routing, analog grounding, and exposed-pad connection must also follow the pin-description and layout guidance in the Infineon datasheet.
This product page combines the manufacturer ordering information, core memory and operating attributes, application context, engineering design notes, and qualified same-brand comparison parts. It is intended to accelerate component selection while keeping schematic, firmware, and qualification decisions tied to Infineon documentation.
直接替换替代料: XMC4400F100F256BAXQMA1 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XMC4400F100F256BAXQMA1 (相同外形与封装尺寸) ——差异在于 Package, Product Type, Ethernet Support, Flash Organization, Architecture.
XMC4400F100K256BAXUMA2
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XMC4400F100F512BAXQMA1
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XMC4400F100K512BAXQMA1
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XMC4400F100F512BAXUMA1
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XMC4402-F100K256-BA
✅ 直接替换📋 参考替代料(不在目录中)
XMC4400F100F256BAXQMA1 最大额定值与电气特性
| Product Type | 32-bit industrial Arm Cortex-M4 microcontroller |
| CPU Core | Arm Cortex-M4 |
| CPU Clock Frequency | 120 MHz |
| Bit Width | 32 bit |
| Program Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bit |
| SRAM | 80 KB |
| 工作电源电压 | 3.3 V |
| Ethernet Support | Yes |
| PWM Resolution | 150 ps |
| 封装 | PG-LQFP-100 with exposed pad |
| Lead Count | 100 pins |
| Package Temperature Designation | -25 to +125 C grade designation |
| Product Family | XMC4000 |
| Application Classification | Industrial |
| 安装类型 | Surface mount |
XMC4400F100F256BAXQMA1 -25 to +125 c grade designation 引脚配置指南
XMC4400F100F256BAXQMA1(-25 to +125 c grade designation 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XMC4400F100F256BAXQMA1.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XMC4400F100F256BAXQMA1 适用于 6 应用s: Industrial Ethernet Controller, Real-Time Human-Machine Interface, Digital Power Conversion Control, Motor and Actuator Control, Programmable Automation Controller, Embedded Signal-Processing System.
Industrial Ethernet Controller
The Infineon XMC4400F100F256BAXQMA1 fits network-connected industrial controllers because it combines an Ethernet interface, a 120 MHz Cortex-M4 core, and 80 KB of SRAM. Firmware can run supervisory logic, protocol processing, diagnostics, and real-time control tasks while the 256 KB flash holds application code and configuration. The 150 ps PWM capability also allows the same controller to supervise precision timing. Board implementation should follow Infineon's Ethernet reference layout, including controlled-impedance routing, suitable termination, magnetics integration, and separation between high-current outputs and sensitive communications circuitry.
推荐
Real-Time Human-Machine Interface
The XMC4400F100F256BAXQMA1 is suitable for responsive industrial HMI controllers that combine graphical or touch-panel handling with real-time machine supervision. Its 120 MHz Arm Cortex-M4 core provides processing capacity for interface tasks, while 256 KB of flash accommodates control firmware, graphics resources, and configuration data. Eighty kilobytes of SRAM supports display buffers and communication state, and the high-resolution PWM unit can support synchronized indicator, dimming, or actuator timing. Designers should allocate memory for the graphics stack and use the Infineon pin-description table to assign display and touch-controller interfaces deterministically.
推荐
Digital Power Conversion Control
The XMC4400F100F256BAXQMA1 can serve as the supervisory controller in a digitally controlled power converter. Its 120 MHz Cortex-M4 core executes current and voltage control loops, while the 150 ps PWM resolution enables fine switching-edge placement when the timer resources are configured appropriately. The 256 KB flash holds control firmware and calibration tables, and 80 KB of SRAM accommodates sampled data and control variables. For reliable deployment, account for converter switching noise, keep sensitive analog paths isolated, verify timing against actual clock settings, and follow the exposed-pad copper recommendations for thermal dissipation.
推荐
Motor and Actuator Control
The Infineon XMC4400F100F256BAXQMA1 suits motor-control and actuator-control front ends where deterministic timing and fast supervisory computation are required. The high-resolution PWM unit provides 150 ps timing granularity, while the 120 MHz Cortex-M4 core can process feedback, execute control laws, and coordinate communications. Eighty kilobytes of SRAM supports control variables and diagnostic buffers, and 256 KB of flash is sufficient for many embedded control applications. Use Infineon's timer and pin-assignment guidance to select channel functions, and separate switching-node power stages from low-level sensing and debug signals.
推荐
Programmable Automation Controller
The XMC4400F100F256BAXQMA1 is appropriate for programmable automation equipment that must combine I/O control, communications, diagnostics, and local processing. The industrial XMC4000 positioning supports equipment with defined operating-temperature expectations, while 120 MHz execution and 256 KB flash provide capacity for structured control applications. Ethernet permits integration with plant networks, and the 80 KB SRAM can hold protocol stacks and working state. For deployment, validate every I/O assignment and peripheral multiplex option against the exact ordering designation, and provide robust startup, brownout, watchdog, and field-update behavior.
推荐
Embedded Signal-Processing System
The XMC4400F100F256BAXQMA1 can support embedded signal-processing systems that combine sampling control, filtering, communications, and deterministic output timing. Its 120 MHz Cortex-M4 core performs protocol and supervisory work, the 80 KB SRAM accommodates active buffers, and the 150 ps PWM resolution benefits precision excitation or synchronization. The 256 KB flash provides room for algorithms, calibration, and diagnostics. System partitioning should account for DMA, cache behavior, interrupt latency, and analog front-end bandwidth. Use the Infineon datasheet's electrical and peripheral tables to confirm that each selected sensing and conversion interface is available for this ordering code.
推荐
推荐产品汇总
工程参考数据: XMC4400F100F256BAXQMA1 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XMC4400F100K256BAXUMA2 | XMC4400F100F512BAXQMA1 | XMC4400F100K512BAXQMA1 | XMC4400F100F512BAXUMA1 | XMC4402-F100K256-BA |
|---|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Package | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad |
| CPU Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Program Flash | 256 KB | 256 KB | 512 KB | 512 KB | 512 KB | 256 KB |
| SRAM | 80 KB | 80 KB | 80 KB | 80 KB | 80 KB | 80 KB |
| Ethernet Support | Yes | Yes | Yes | Yes | Yes | Yes |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
关键差异点
- Matches the 256 KB flash capacity of the related XMC4400 ordering option (对比 XMC4400F100K256BAXUMA2)
- Provides substantially more nonvolatile memory for expanded firmware (对比 XMC4400F100F512BAXQMA1)
- Supports larger firmware images in an alternate ordering option (对比 XMC4400F100K512BAXQMA1)
- Shares the principal memory and networking characteristics of a related XMC4000 controller (对比 XMC4402-F100K256-BA)
设计说明
Treat the exposed pad as part of the package's thermal path. Follow the Infineon XMC4400 land pattern, including the recommended pad geometry, via arrangement, and copper area, because a generic LQFP footprint may not reproduce it. Estimate worst-case junction temperature from processor activity, supply voltage, ambient temperature, and board copper rather than relying only on the nominal package designation. Keep exposed-pad vias clear of sensitive analog routing where the recommended layout permits.
Route Ethernet signals as controlled-impedance interfaces and use the reference layout in the Infineon XMC4400 documentation for magnetics, termination, and decoupling placement. Avoid routing switching-node or high-current motor outputs beneath the MCU, analog inputs, or clock circuitry. Keep the 3.3 V supply distribution compact, place local high-frequency bypass capacitance at the appropriate pins, and verify the exposed-pad connection against the package drawing before release to manufacturing.
Build the 3.3 V power budget from the selected operating mode, clock configuration, enabled peripherals, Ethernet activity, and I/O loading rather than from the CPU frequency alone. The 120 MHz core does not imply a constant maximum-current condition, but switching and peripheral states can change demand. Review the Infineon electrical characteristics for each supply domain and use the device's specified decoupling and startup sequence in the reference circuit.
Do not treat every XMC4400 ordering code as firmware- and qualification-identical. Differences in temperature grade, silicon revision, flash size, qualification, or package suffix can affect lifecycle, qualification, or board sourcing even when the LQFP-100 outline is shared. Before replacing the target, compare the complete Infineon ordering table, pin-description table, electrical characteristics, errata, and any required firmware migration steps.
Assign clock, debug, communications, and timing-sensitive pins directly from the Infineon pin-description table for the exact ordering designation. Multiplexing options may move functions between package leads, so a generic XMC4400 symbol can produce routing errors. Review interrupt priorities, timer channels, DMA requests, and peripheral instances in the XMC4400 reference manual, then validate the final clock and pin plan against a firmware initialization trace before PCB signoff.
合规信息
The XMC4400 is identified as an industrial microcontroller. No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was present in the referenced product information, so those fields remain unknown.