AD5142ABCPZ10-RL7 vs AD5142ABCPZ100-RL7 Comparación
Comparación detallada lado a lado de AD5142ABCPZ10-RL7 por Analog Devices y AD5142ABCPZ100-RL7 por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ ActivoAnalog Devices
AD5142ABCPZ100-RL7 - 100kΩ Dual 256-Tap I²C Nonvolatile DigiPOT | Analog Devices
AD5142ABCPZ100-RL7 ✓ ActivoComparación de especificaciones
| Parámetro | AD5142ABCPZ10-RL7 | AD5142ABCPZ100-RL7 |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $3,36 | $3,40 |
| Number of Potentiometers | 2 (dual) | — |
| Nominal End-to-End Resistance (R-AB) | 10 kΩ | — |
| Number of Taps | 256 positions | 256 per channel |
| Interfaz | I²C-compatible (SCL up to 3 MHz) | I²C-compatible |
| Tipo de memoria | Non-volatile EEPROM | — |
| Resistor Tolerance | ±8% | ±8% |
| Temperature Coefficient | 35 ppm/°C nominal | — |
| Wiper Resistance (ends of array) | 40 Ω typical | — |
| Continuous Current on A/B/W Pins | ±6 mA max | — |
| Supply Voltage (VDD) | 2.3 V to 5.5 V | — |
| Temperatura de funcionamiento | -40 °C to +125 °C | -40 °C to +125 °C |
| Encapsulado | 16-lead LFCSP (3 mm × 3 mm) with EP | 16-LFCSP (3 mm x 3 mm) with exposed pad |
| Tipo de montaje | Surface Mount | — |
| Taper | Linear | — |
| Estado RoHS | Compliant | Compliant |
| AEC-Q100 Qualification | Not AEC-Q100 qualified (industrial grade) | — |
| Soft Reset | Yes (loads default wiper setting) | — |
| Manufacturer | — | Analog Devices Inc. |
| Part Number | — | AD5142ABCPZ100-RL7 |
| Función | — | Digital Potentiometer (DigiPOT) |
| Number of Circuits | — | 2 (dual) |
| Nominal Resistance (R-AB) | — | 100 kΩ |
| Memory | — | Nonvolatile EEPROM (wiper position retained) |
| Wiper Resistance (RW) | — | 40 Ω at end positions (typical) |
| Current Density (A, B, W pins) | — | ±6 mA maximum |
| Supply Voltage (Single) | — | 2.3 V to 5.5 V |
| Taper / Taper Type | — | Linear |
| Packaging | — | Tape & Reel (RL7 = 7-inch reel) |
| Nivel MSL | — | [DATA_NEEDED: MSL level] |
| Wiper Position Readback | — | Yes (via I²C) |
| EEPROM Endurance | — | [DATA_NEEDED: write cycles] |