AD5142ABCPZ10-RL7 vs AD5142ABCPZ100-RL7 Comparaison
Comparaison détaillée côte à côte de AD5142ABCPZ10-RL7 par Analog Devices et AD5142ABCPZ100-RL7 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ ActifAnalog Devices
AD5142ABCPZ100-RL7 - 100kΩ Dual 256-Tap I²C Nonvolatile DigiPOT | Analog Devices
AD5142ABCPZ100-RL7 ✓ ActifComparaison des spécifications
| Paramètre | AD5142ABCPZ10-RL7 | AD5142ABCPZ100-RL7 |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,36 | $3,40 |
| Number of Potentiometers | 2 (dual) | — |
| Nominal End-to-End Resistance (R-AB) | 10 kΩ | — |
| Number of Taps | 256 positions | 256 per channel |
| Interface | I²C-compatible (SCL up to 3 MHz) | I²C-compatible |
| Type de mémoire | Non-volatile EEPROM | — |
| Resistor Tolerance | ±8% | ±8% |
| Temperature Coefficient | 35 ppm/°C nominal | — |
| Wiper Resistance (ends of array) | 40 Ω typical | — |
| Continuous Current on A/B/W Pins | ±6 mA max | — |
| Supply Voltage (VDD) | 2.3 V to 5.5 V | — |
| Température de fonctionnement | -40 °C to +125 °C | -40 °C to +125 °C |
| Boîtier | 16-lead LFCSP (3 mm × 3 mm) with EP | 16-LFCSP (3 mm x 3 mm) with exposed pad |
| Type de montage | Surface Mount | — |
| Taper | Linear | — |
| Statut RoHS | Compliant | Compliant |
| AEC-Q100 Qualification | Not AEC-Q100 qualified (industrial grade) | — |
| Soft Reset | Yes (loads default wiper setting) | — |
| Manufacturer | — | Analog Devices Inc. |
| Part Number | — | AD5142ABCPZ100-RL7 |
| Fonction | — | Digital Potentiometer (DigiPOT) |
| Number of Circuits | — | 2 (dual) |
| Nominal Resistance (R-AB) | — | 100 kΩ |
| Memory | — | Nonvolatile EEPROM (wiper position retained) |
| Wiper Resistance (RW) | — | 40 Ω at end positions (typical) |
| Current Density (A, B, W pins) | — | ±6 mA maximum |
| Supply Voltage (Single) | — | 2.3 V to 5.5 V |
| Taper / Taper Type | — | Linear |
| Packaging | — | Tape & Reel (RL7 = 7-inch reel) |
| Niveau MSL | — | [DATA_NEEDED: MSL level] |
| Wiper Position Readback | — | Yes (via I²C) |
| EEPROM Endurance | — | [DATA_NEEDED: write cycles] |