AD5142ABCPZ10-RL7 vs AD5142ABCPZ100-RL7 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng AD5142ABCPZ10-RL7 sa pamamagitan ng Analog Devices at AD5142ABCPZ100-RL7 sa pamamagitan ng Analog Devices. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ NakahandaAnalog Devices
AD5142ABCPZ100-RL7 - 100kΩ Dual 256-Tap I²C Nonvolatile DigiPOT | Analog Devices
AD5142ABCPZ100-RL7 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | AD5142ABCPZ10-RL7 | AD5142ABCPZ100-RL7 |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Number of Potentiometers | 2 (dual) | — |
| Nominal End-to-End Resistance (R-AB) | 10 kΩ | — |
| Number of Taps | 256 positions | 256 per channel |
| Interface | I²C-compatible (SCL up to 3 MHz) | I²C-compatible |
| Uri ng Memory | Non-volatile EEPROM | — |
| Resistor Tolerance | ±8% | ±8% |
| Temperature Coefficient | 35 ppm/°C nominal | — |
| Wiper Resistance (ends of array) | 40 Ω typical | — |
| Continuous Current on A/B/W Pins | ±6 mA max | — |
| Supply Voltage (VDD) | 2.3 V to 5.5 V | — |
| Temperature na Operasyon | -40 °C to +125 °C | -40 °C to +125 °C |
| Packhaging | 16-lead LFCSP (3 mm × 3 mm) with EP | 16-LFCSP (3 mm x 3 mm) with exposed pad |
| Uri ng Pagpapasok | Surface Mount | — |
| Taper | Linear | — |
| Tindminan RoHS | Compliant | Compliant |
| AEC-Q100 Qualification | Not AEC-Q100 qualified (industrial grade) | — |
| Soft Reset | Yes (loads default wiper setting) | — |
| Manufacturer | — | Analog Devices Inc. |
| Part Number | — | AD5142ABCPZ100-RL7 |
| Fungsi | — | Digital Potentiometer (DigiPOT) |
| Number of Circuits | — | 2 (dual) |
| Nominal Resistance (R-AB) | — | 100 kΩ |
| Memory | — | Nonvolatile EEPROM (wiper position retained) |
| Wiper Resistance (RW) | — | 40 Ω at end positions (typical) |
| Current Density (A, B, W pins) | — | ±6 mA maximum |
| Supply Voltage (Single) | — | 2.3 V to 5.5 V |
| Taper / Taper Type | — | Linear |
| Packaging | — | Tape & Reel (RL7 = 7-inch reel) |
| Level ng MSL | — | [DATA_NEEDED: MSL level] |
| Wiper Position Readback | — | Yes (via I²C) |
| EEPROM Endurance | — | [DATA_NEEDED: write cycles] |