ADM485JRZ vs ADM483JRZ Comparación
Comparación detallada lado a lado de ADM485JRZ por Analog Devices y ADM483JRZ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | ADM485JRZ | ADM483JRZ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-485/RS-422 differential line transceiver | RS-485/RS-422 differential line transceiver |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Maximum Data Rate | 5 Mbits/s | 250 kbps |
| Communication Mode | Half-duplex | — |
| Supported Standards | EIA RS-485 and RS-422 | — |
| Driver Output Count | 1 differential driver | — |
| Receiver Input Count | 1 differential receiver | — |
| Driver and Receiver Control | Independently enabled | — |
| Encapsulado | 8-pin SOIC | 8-SOIC, 0.154 in (3.90 mm) body width |
| Tipo de montaje | Surface mount | Surface mount |
| Temperature Grade | Commercial and industrial temperature range | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Corriente en reposo | [DATA_NEEDED: quiescent current] | — |
| Corriente de alimentación | [DATA_NEEDED: driver and receiver supply current] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Driver Output Differential Voltage | [DATA_NEEDED: driver output differential voltage] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Drivers | — | 1 driver |
| Number of Receivers | — | 1 receiver |
| Tensión de alimentación | — | 4.75 V to 5.25 V |
| Nominal Supply Voltage | — | 5 V |
| Duplex Mode | — | Half-duplex |
| Supported Protocols | — | EIA RS-485 and EIA RS-422 |
| Bus Common-Mode Range | — | -7 V to +12 V |
| Shutdown Supply Current | — | 100 nA |
| Operating Supply Current | — | 120 µA |
| Maximum Transceivers per Bus | — | 32 transceivers |
| Output Behavior When Disabled | — | High impedance |
| Driver Edge Control | — | Slew-rate limited |
| Protection Features | — | Thermal shutdown and short-circuit protection |
| Packaging | — | Tube |