ADM485JRZ vs ADM483JRZ Comparaison
Comparaison détaillée côte à côte de ADM485JRZ par Analog Devices et ADM483JRZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ADM485JRZ | ADM483JRZ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485/RS-422 differential line transceiver | RS-485/RS-422 differential line transceiver |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Maximum Data Rate | 5 Mbits/s | 250 kbps |
| Communication Mode | Half-duplex | — |
| Supported Standards | EIA RS-485 and RS-422 | — |
| Driver Output Count | 1 differential driver | — |
| Receiver Input Count | 1 differential receiver | — |
| Driver and Receiver Control | Independently enabled | — |
| Boîtier | 8-pin SOIC | 8-SOIC, 0.154 in (3.90 mm) body width |
| Type de montage | Surface mount | Surface mount |
| Temperature Grade | Commercial and industrial temperature range | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Courant d'alimentation | [DATA_NEEDED: driver and receiver supply current] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Driver Output Differential Voltage | [DATA_NEEDED: driver output differential voltage] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Drivers | — | 1 driver |
| Number of Receivers | — | 1 receiver |
| Tension d'alimentation | — | 4.75 V to 5.25 V |
| Nominal Supply Voltage | — | 5 V |
| Duplex Mode | — | Half-duplex |
| Supported Protocols | — | EIA RS-485 and EIA RS-422 |
| Bus Common-Mode Range | — | -7 V to +12 V |
| Shutdown Supply Current | — | 100 nA |
| Operating Supply Current | — | 120 µA |
| Maximum Transceivers per Bus | — | 32 transceivers |
| Output Behavior When Disabled | — | High impedance |
| Driver Edge Control | — | Slew-rate limited |
| Protection Features | — | Thermal shutdown and short-circuit protection |
| Packaging | — | Tube |