ADM485JRZ vs ADM483JRZ तुलना

विस्तृत दोनों ओर की तुलना ADM485JRZ द्वारा Analog Devices और ADM483JRZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
ADM485JRZ ADM485JRZ - 5V 5Mbps RS-485 Transceiver | Analog Devices

ADM485JRZ - 5V 5Mbps RS-485 Transceiver | Analog Devices

ADM485JRZ ✓ सक्रिय
Analog Devices
ADM483JRZ ADM483JRZ - 250 kbps RS-485/RS-422 Transceiver | Analog Devices

ADM483JRZ - 250 kbps RS-485/RS-422 Transceiver | Analog Devices

ADM483JRZ ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADM485JRZ ADM483JRZ
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-485/RS-422 differential line transceiver RS-485/RS-422 differential line transceiver
Supply Voltage Range 4.75 V to 5.25 V —
Maximum Data Rate 5 Mbits/s 250 kbps
Communication Mode Half-duplex —
Supported Standards EIA RS-485 and RS-422 —
Driver Output Count 1 differential driver —
Receiver Input Count 1 differential receiver —
Driver and Receiver Control Independently enabled —
पैकेज 8-pin SOIC 8-SOIC, 0.154 in (3.90 mm) body width
माउंटिंग प्रकार Surface mount Surface mount
Temperature Grade Commercial and industrial temperature range —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
Propagation Delay [DATA_NEEDED: driver and receiver propagation delay] —
क्वाइसेंट करंट [DATA_NEEDED: quiescent current] —
सप्लाई करंट [DATA_NEEDED: driver and receiver supply current] —
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
Driver Output Differential Voltage [DATA_NEEDED: driver output differential voltage] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Number of Drivers — 1 driver
Number of Receivers — 1 receiver
सप्लाई वोल्टेज — 4.75 V to 5.25 V
Nominal Supply Voltage — 5 V
Duplex Mode — Half-duplex
Supported Protocols — EIA RS-485 and EIA RS-422
Bus Common-Mode Range — -7 V to +12 V
Shutdown Supply Current — 100 nA
Operating Supply Current — 120 µA
Maximum Transceivers per Bus — 32 transceivers
Output Behavior When Disabled — High impedance
Driver Edge Control — Slew-rate limited
Protection Features — Thermal shutdown and short-circuit protection
Packaging — Tube

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध