ADM485JRZ vs ADM483JRZ Сравнение

Подробное сравнение бок о бок ADM485JRZ от Analog Devices и ADM483JRZ от Analog Devices. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.

Analog Devices
ADM485JRZ ADM485JRZ - 5V 5Mbps RS-485 Transceiver | Analog Devices

ADM485JRZ - 5V 5Mbps RS-485 Transceiver | Analog Devices

ADM485JRZ ✓ Активен
Analog Devices
ADM483JRZ ADM483JRZ - 250 kbps RS-485/RS-422 Transceiver | Analog Devices

ADM483JRZ - 250 kbps RS-485/RS-422 Transceiver | Analog Devices

ADM483JRZ ✓ Активен

Сравнение характеристик

Параметр ADM485JRZ ADM483JRZ
Бренд Analog Devices Analog Devices
Категория Interface ICs Interface ICs
Статус жизненного цикла Активен Активен
Product Type RS-485/RS-422 differential line transceiver RS-485/RS-422 differential line transceiver
Supply Voltage Range 4.75 V to 5.25 V —
Maximum Data Rate 5 Mbits/s 250 kbps
Communication Mode Half-duplex —
Supported Standards EIA RS-485 and RS-422 —
Driver Output Count 1 differential driver —
Receiver Input Count 1 differential receiver —
Driver and Receiver Control Independently enabled —
Корпус 8-pin SOIC 8-SOIC, 0.154 in (3.90 mm) body width
Тип монтажа Surface mount Surface mount
Temperature Grade Commercial and industrial temperature range —
Диапазон рабочих температур [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
Propagation Delay [DATA_NEEDED: driver and receiver propagation delay] —
Ток покоя [DATA_NEEDED: quiescent current] —
Ток потребления [DATA_NEEDED: driver and receiver supply current] —
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
Driver Output Differential Voltage [DATA_NEEDED: driver output differential voltage] —
Статус RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Number of Drivers — 1 driver
Number of Receivers — 1 receiver
Напряжение питания — 4.75 V to 5.25 V
Nominal Supply Voltage — 5 V
Duplex Mode — Half-duplex
Supported Protocols — EIA RS-485 and EIA RS-422
Bus Common-Mode Range — -7 V to +12 V
Shutdown Supply Current — 100 nA
Operating Supply Current — 120 µA
Maximum Transceivers per Bus — 32 transceivers
Output Behavior When Disabled — High impedance
Driver Edge Control — Slew-rate limited
Protection Features — Thermal shutdown and short-circuit protection
Packaging — Tube

Даташиты & ресурсы

Все товары Создать BOM Запросить цену