BSP78HUMA1 vs BTS3011TEATMA1 Comparación
Comparación detallada lado a lado de BSP78HUMA1 por Infineon y BTS3011TEATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BSP78HUMA1 | BTS3011TEATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,62 | $0,51 |
| Technology | Smart SIPMOS (N-channel vertical power FET) | — |
| Función | Self-protected low-side power switch | — |
| Operating Supply Voltage (Vbb) | 4.5 V to 42 V | — |
| Continuous Load Current | Up to 3 A | 10 A |
| On-state Resistance (Rds(on)) | 200 mΩ typical | — |
| Input Logic Level | Logic-level (3.3 V / 5 V compatible) | — |
| Current Limitation | Yes (internal) | — |
| Apagado térmico | Yes (with auto-restart) | — |
| Overvoltage Protection | Yes (load-dump tolerant) | — |
| Short-circuit Protection | Yes | — |
| Overload Protection | Yes | — |
| ESD Protection | Yes (on input pin) | — |
| Diagnostic Output | Open-drain status flag | Open-drain status feedback pin |
| Temperatura de unión de funcionamiento | -40 °C to +150 °C | -40 °C to +150 °C |
| Encapsulado | PG-SOT223-4 (TO-261-4) with exposed tab | PG-TO252-5 (DPAK-5) |
| Tipo de montaje | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified | Grade 1 qualified |
| Estado RoHS | Compliant (Green product) | Compliant |
| Product Type | — | Smart Low-Side Power Switch |
| Number of Channels | — | 1 |
| On-Resistance R_DS(on) (typ.) | — | 11 mΩ |
| Operating Voltage Range | — | 3 V to 28 V |
| Switch Technology | — | N-channel vertical power MOSFET |
| Input Type | — | Logic-level CMOS compatible |
| Número de pines | — | 5 (4 + Tab) |
| ESD Protection (HBM) | — | ±8 kV (output pin) |
| Integrated Protections | — | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection |