BTS428L2 vs BTS428L2ATMA1 तुलना
विस्तृत दोनों ओर की तुलना BTS428L2 द्वारा Infineon और BTS428L2ATMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | BTS428L2 | BTS428L2ATMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Smart High-Side Power Switch (Classic PROFET) | Smart High-Side Power Switch |
| टोपोलॉजी | Single-channel high-side N-channel MOSFET with charge pump | — |
| Nominal Operating Voltage | 24 V (automotive 12 V/24 V board net) | — |
| Maximum Continuous Load Current | 5.8 A | — |
| On-State Resistance (RDS(on)) | 60 mΩ (typical) | — |
| Number of Channels | 1 | 1 |
| Status Feedback | Yes (dedicated status pin) | — |
| ओवरकरंट प्रोटेक्शन | Yes (integrated) | — |
| Short-Circuit Protection | Yes (integrated) | — |
| Overtemperature Protection | Yes (integrated thermal shutdown) | Yes, with autorestart |
| Overvoltage Protection | Yes (load-dump tolerant) | Load-dump / overvoltage clamp |
| Reverse Battery Protection | Yes (integrated) | — |
| Standby Current | Low standby current (green/RoHS-compliant device) | Very low (per datasheet) |
| ऑपरेटिंग तापमान रेंज | -40 °C to +150 °C | [DATA_NEEDED: min/max] |
| पैकेज | PG-TO252-5-11 (TO-252 / DPAK, 5 leads) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| RoHS Compliance | Compliant (Pb-free, green product, IPC/JEDEC J-STD-020) | — |
| Technology | — | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Input Type | — | CMOS-compatible, ground-referenced |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| ऑपरेटिंग सप्लाई वोल्टेज | — | [DATA_NEEDED: nominal and range] |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |