10AX090S2F45E2LG - Arria 10 GX FPGA, 900K LE, 1932-FCBGA | Intel
N.º de pieza: 10AX090S2F45E2LG ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $4850 | $4.850,00 |
| 10 | $4650 | $46.500,00 |
| 100 | $4290 | $429.000,00 |
| 500 | $3990 | $1.995.000,00 |
| 1.000 | $3750 | $3.750.000,00 |
10AX090S2F45E2LG Descripción general
An FPGA is a reprogrammable semiconductor device that allows engineers to define arbitrary digital logic, memory structures, and I/O protocols after PCB fabrication, sitting architecturally between standard logic ICs and full custom ASICs. Within Intel's broader programmable solutions hierarchy, the Arria 10 family targets mid-range transceiver-rich applications between the lower-cost Cyclone series and the high-end Stratix family. The 'GX' suffix denotes the inclusion of multi-gigabit transceivers, distinguishing it from 'GT' variants that add dedicated 28 Gbps+ channels and 'SX' variants that substitute additional ARM Cortex-A9 cores. The '10AX090' code parses as '10' = Arria 10 family, 'AX' = FPGA fabric with transceivers, '090' = approximately 900 K logic elements.
Key features include 24 transceiver channels at up to 14.1 Gbps NRZ, integrated hard IP for PCIe Gen3 x8 and Gen2 x8, 24 variable-precision DSP blocks supporting IEEE 754 single-precision floating point, and 4 memory controllers with ECC supporting DDR4 up to 2400 Mbps. The device also provides 12 dedicated PLL blocks, fractional PLLs for jitter-sensitive serial links, and partial reconfiguration support for live hardware updates. The Arria 10 architecture's adaptive logic module (ALM) structure optimizes mixed arithmetic and register density for DSP pipelines common in radar, beamforming, and video processing pipelines.
Typical applications include 100G/40G line card aggregation, software-defined radio front-ends, FPGA-based ASIC prototyping, medical imaging accelerators, and high-frame-rate broadcast video processing. For engineers targeting mid-volume production, the Arria 10's hard PCIe Gen3 controller and transceiver channels replace multiple external serializer-deserializer ICs, reducing BOM count and simplifying layout.
When designing with the 1932-FCBGA, plan a 16-layer stack-up with controlled-impedance routing for the 14 Gbps channels, and use thermal vias under the exposed-die region of the F45 package. Quartus Prime Pro Edition (Intel FPGA development software) supports the entire Arria 10 family and includes Transceiver Toolkit, SignalTap logic analyzer, and Platform Designer for system integration. Verify pinout against the device-specific pin-out file for the 10AX090S2F45E2LG variant; -LG suffix indicates lead-free, RoHS-compliant termination finish.
This page synthesizes distributor pricing snapshots, drop-in package-compatible variants within the Arria 10 family, and PCB layout considerations specific to the F45 1932-ball FCBGA package that are not collected in the manufacturer datasheet.
Alternativas directas para 10AX090S2F45E2LG — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con 10AX090S2F45E2LG (mismo factor de forma y huella) — difiere en Speed Grade, Package, DSP Blocks, Process Node, Temperature Grade.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
10AX090S2F45E1SG
✅ Sustitución directa✓ En stock
$4890 / unidad
Ver hoja de datos →10AX090S1F45E1SG
✅ Sustitución directa✓ En stock
$8200 / unidad
Ver hoja de datos →10AX090S1F45I1SG
✅ Sustitución directa✓ En stock
$3890 / unidad
Ver hoja de datos →10AX090S2F45E2LG
✅ Sustitución directa✓ En stock
$3750 / unidad
Ver hoja de datos →10AX090R2F40E2SG
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$4750 / unidad
Ver hoja de datos →10AX090R3F40E2SG
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$5400 / unidad
Ver hoja de datos →10AX090S2F45E2LG Valores máximos y características eléctricas
| Family | Arria 10 GX |
| Logic Elements | 900,000 |
| Embedded Memory (bits) | 59,234,304 |
| DSP Blocks | Variable-precision, 24-bit multiplier base |
| Adaptive Logic Modules (ALMs) | 338,200 |
| Transceiver Channels | Up to 24 (data rate per channel up to 14.1 Gbps) |
| Hard Memory Controllers | 4, supports DDR4 / DDR3 / RLDRAM3 / QDR IV |
| PCIe Hard IP | PCI Express Gen3 x8 / Gen2 x8 |
| Process Technology | 20 nm Tri-Gate (FinFET) |
| Speed Grade | E2 (commercial/extended) |
| Encapsulado | 1932-ball FCBGA, 45 mm body (F45) |
| Operating Temperature Grade | Industrial (per -LG suffix convention; verify against order code) |
| Core Voltage (Vcc) | 0.9 V (nominal; per family datasheet) |
| RoHS / Lead-Free | Yes (LG suffix indicates Pb-free) |
| Configuration Interface | Active serial (EPCQ-L), JTAG, Fast Passive Parallel |
Guía de configuración de pines de 10AX090S2F45E2LG 1932-ball fcbga, 45 mm body (f45)
Configuración de pines para 10AX090S2F45E2LG (encapsulado 1932-ball fcbga, 45 mm body (f45)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para 10AX090S2F45E2LG.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
10AX090S2F45E2LG es adecuado para 6 aplicacións: 100G/40G Ethernet Line Card Aggregation, Software-Defined Radio (SDR) Front-End, FPGA-Based ASIC Prototyping, Medical Imaging Accelerator, High-Frame-Rate Broadcast Video Processing, Radar / Beamforming Signal Processing.
100G/40G Ethernet Line Card Aggregation
The 10AX090S2F45E2LG is well suited for 100G/40G Ethernet line cards in carrier-grade switches and routers. With 24 transceiver channels at 14.1 Gbps, the device can implement CAUI-10 (10 lanes at 10.3125 Gbps), 100GBASE-R4, or OTU4 framing. The hardened PCIe Gen3 x8 controller provides backplane interconnect to a network processor, while four DDR4 controllers feed deep packet buffers. The 1932-ball FCBGA F45 package supports the high pin-count routing required for 10+ serial links plus parallel TCAM and QDR interfaces in a single device, replacing multiple FPGAs in 40G-class designs.
Recomendado
Software-Defined Radio (SDR) Front-End
The 10AX090S2F45E2LG enables wideband SDR front-ends through 24 transceivers sampling at up to 14.1 Gbps, supporting multi-band digital down-conversion chains for LTE, 5G NR, and tactical radio waveforms. The variable-precision DSP blocks (24-bit base) execute FFT, channelization, and beamforming pipelines in fixed-point, with 338,200 ALMs handling control and MAC layers. Hard PCIe Gen3 enables streaming baseband data to a host CPU at >7 GB/s, while DDR4 controllers feed decimation buffers. The E2 speed grade provides timing closure for 491.52 MHz DSP clocks common in LTE sample rates.
Recomendado
FPGA-Based ASIC Prototyping
The 10AX090S2F45E2LG serves as a high-density prototyping vehicle for mid-complexity ASIC designs targeting 100-200M gates. With 900,000 logic elements, 59 Mbits of embedded memory, and 24 transceivers, the device can host multi-clock domain ASIC blocks plus SerDes bridges to ASSP test chips. Quartus Prime TimeQuest supports ASIC netlist back-annotation, and the F45 1932-ball FCBGA exposes sufficient GPIO for chip-to-chip break-out. Engineers stack multiple Arria 10 devices via LVDS or HSMC bridges for designs exceeding one device's capacity.
Recomendado
Medical Imaging Accelerator
The 10AX090S2F45E2LG accelerates CT, MRI, and ultrasound reconstruction pipelines through parallel DSP blocks implementing filtered back-projection, Fourier transforms, and image registration. Hardened DDR4 controllers sustain the 4-8 GB/s memory bandwidth required for 1024x1024x256 volume rendering at real-time rates. The 24 transceivers enable raw RF data ingestion from ultrasound front-end ADCs at 12 Gbps lane rates. E2 speed grade meets timing for 200-300 MHz DSP clock domains typical in medical imaging accelerator blocks.
Recomendado
High-Frame-Rate Broadcast Video Processing
The 10AX090S2F45E2LG processes 4K/8K broadcast video at 60-120 Hz through the 24 transceivers implementing SDI (SMPTE 2022/2082), HDMI 2.1, and 12G-SDI ingest. Variable-precision DSP blocks execute real-time color-space conversion, scaling, and frame-rate conversion pipelines. DDR4 controllers feed multi-frame buffers; PCIe Gen3 connects to host CPU for file playback. Industrial temperature variants are required for outdoor broadcast and OB-van deployments where ambient temperatures exceed commercial ranges.
Recomendado
Radar / Beamforming Signal Processing
The 10AX090S2F45E2LG performs phased-array radar baseband processing, implementing FFT, pulse compression, Doppler filtering, and adaptive beamforming for AESA radar front-ends. The 24 transceivers at 14.1 Gbps accept digitized sub-array data from multi-channel ADC ASICs; variable-precision DSP blocks compute complex-matrix beamforming weights at sample rates up to 491.52 MHz. Four DDR4 controllers maintain sliding-window data archives for SAR processing. Hardened PCIe Gen3 x8 streams detected tracks to the radar controller at sustained rates above 6 GB/s.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para 10AX090S2F45E2LG — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | 10AX090S2F45E1SG | 10AX090S1F45E1SG | 10AX090S1F45I1SG | 10AX090R2F40E2SG |
|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel |
| Package | 1932-ball FCBGA (F45, 45 mm) | 1932-ball FCBGA (F45, 45 mm) - same | 1932-ball FCBGA (F45, 45 mm) - same | 1932-ball FCBGA (F45, 45 mm) - same | 1932-ball FCBGA (F40, 40 mm) - body variant |
| Family | Arria 10 GX | Arria 10 GX | Arria 10 GX | Arria 10 GX | Arria 10 GX |
| Logic Elements | 900,000 | 900,000 | 900,000 | 900,000 | 900,000 |
| Speed Grade | E2 (S2) | E1 (S1) | E1 (S1) | E1 (I1) | E2 (R2) |
| Temperature Grade | Extended (LG suffix indicates lead-free, verify temp against order code) | Extended (SG) | Extended (SG) | Industrial (I grade) | Extended (SG) |
| Transceiver Rate (max) | 14.1 Gbps | 14.1 Gbps | 12.5 Gbps | 12.5 Gbps | 14.1 Gbps |
| Hardened PCIe Gen3 | Yes (x8) | Yes (x8) | Yes (x8) | Yes (x8) | Yes (x8) |
Diferenciadores clave
- Higher transceiver speed grade vs E1 variant (frente a 10AX090S2F45E1SG)
- Lead-free LG ordering code for global compliance (frente a 10AX090S2F45E2SG (non-LG))
- F45 45 mm package provides the largest thermal envelope in the family (frente a 10AX090R3F40E2SG (F40 40 mm))
Notas de diseño
The 1932-ball F45 FCBGA package of the 10AX090S2F45E2LG dissipates 15-25 W typical and up to 35 W worst-case in full-transceiver DSP operation. Estimated: at 20 W ambient 55 C with theta_JA of 0.5 C/W (forced air 200 LFM), junction rises ~10 C. Design requires a heatsink with thermal interface material and 6-9 thermal via array per package thermal pad, connected to internal copper planes in a 16-layer stack-up.
For 14.1 Gbps transceiver channels, use an 8-10 layer stack-up with Megtron-6 or equivalent low-loss dielectric. Reference Intel's AN-528 PCB design guidelines for Arria 10 transceivers: stripline or microstrip differential pairs, 85-100 ohm differential impedance, AC coupling capacitors within 250 mil of TX pins, and continuous reference planes over the entire channel length.
Estimated: full-load VCC core current for 900K-LE Arria 10 is 8-12 A at 0.9 V; VCCIO bank current up to 2 A depending on toggle rate; transceiver PLL analog supply (VCCA_PLL, VCCH_GXB) requires low-noise LDO, not a switching converter. Decouple every VCC pin with 100 nF X7R plus 4.7 uF bulk; add 22 uF polymer on the PCB-side of the regulator plane per the Intel pin connection guidelines.
Do not assume the E2 speed grade provides timing margin for an E1 design - the silicon is binned differently and power is similar. Verify the F45 FCBGA land pattern against the device-specific .pin file, not the generic F45 package drawing, because Intel variants may differ in NC pin assignments. Confirm that your Quartus Prime version supports the device (Pro Edition 17.0 or later recommended).
Place configuration EPCQ-L flash within 2 inches of the FPGA on dedicated routing with reference plane; route JTAG pins with no stubs and pull-ups on TCK/TMS/TDI. Assign transceiver reference clocks from a low-jitter (<300 fs RMS) external oscillator into dedicated REFCLK pins; do not route clock traces over gaps in reference planes or across split ground regions.
Información de cumplimiento
LG suffix indicates lead-free finish per Intel ordering code conventions; RoHS and REACH compliance confirmed per Intel PSG product declarations. AEC-Q100 not applicable - this is an industrial/commercial FPGA. Halogen-free status [DATA_NEEDED].
