A54SX08-1TQG176I - 12K-Gate SX FPGA, 176-TQFP | Microsemi
N.º de pieza: A54SX08-1TQG176I ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $62.5 | $62,50 |
| 10 | $56.2 | $562,00 |
| 100 | $49.8 | $4.980,00 |
| 500 | $44.1 | $22.050,00 |
| 1.000 | $39.3 | $39.300,00 |
A54SX08-1TQG176I Descripción general
An FPGA is a programmable logic device that implements custom digital circuits by configuring a fabric of logic blocks and interconnect. The SX family belongs to the higher tier of the Actel/Microsemi FPGA hierarchy, sitting above the ACT-series FPGAs and using a sea-of-modules antifuse architecture that delivers application-specific-IC-like performance and routing density in a one-time-programmable device. Unlike SRAM FPGAs, the antifuse configuration is non-volatile, radiation-tolerant by nature, and requires no configuration PROM, simplifying the bill of materials and improving design security.
Key features include a 0.35 um process technology with toggle rates up to 280 MHz, dual supply voltage operation (3.0 V to 3.6 V core and 4.75 V to 5.25 V I/O per Microchip USA data), and 128 programmable user I/Os configurable for interfacing with 5 V-tolerant peripheral systems. The -1 speed grade balances performance with power, and the industrial I-suffix rating supports operation in harsh environments.
The sea-of-modules architecture uses two module types, combinational and sequential, in an 8:2 ratio, providing efficient implementation of both wide and narrow logic functions with predictable, low-skew timing. Because routing is fixed at programming time via antifuse links, the device exhibits deterministic interconnect delays that simplify static timing analysis.
Typical applications include industrial control and automation, communications and networking glue logic, bridge and interface logic, and defense/aerospace embedded control where one-time programmability and configuration immunity are valued.
Design consideration: as a one-time-programmable antifuse device, functional errors cannot be re-fixed in the field, so complete simulation with the Libero/Designer flow is mandatory before programming.
This page synthesizes distributor data, family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternativas directas para A54SX08-1TQG176I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con A54SX08-1TQG176I (mismo factor de forma y huella) — difiere en System Gates, Series, Process Technology, Package, Package / Case.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
A54SX08-2TQG176I
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$28.9 / unidad
Ver hoja de datos →A54SX08-TQG176I
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$59.75 / unidad
Ver hoja de datos →A54SX08-1TQG176
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$17.1 / unidad
Ver hoja de datos →A54SX16-TQG176I
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
Consulte el precio
Ver hoja de datos →A54SX16-1TQG176I
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
Consulte el precio
Ver hoja de datos →A54SX32-1TQG176I
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$45.2 / unidad
Ver hoja de datos →A54SX08-1TQG176I Valores máximos y características eléctricas
| Family | Actel SX (54SX) |
| System Gates | 12000 |
| Logic Cells | 512 |
| Logic Array Blocks (LABs) | 768 |
| User I/Os | 128 |
| Speed Grade | -1 |
| Maximum Toggle Rate | 280 MHz |
| Process Technology | 0.35 um |
| Supply Voltage (Core) | 3 V to 3.6 V |
| Supply Voltage (I/O) | 4.75 V to 5.25 V |
| Programming Technology | Antifuse (one-time programmable) |
| Temperatura de funcionamiento | -40C to +85C (industrial, per I suffix) |
| Encapsulado | 176-TQFP (24x24 mm) |
| Tipo de montaje | Surface Mount |
| Architecture | Sea-of-modules |
Guía de configuración de pines de A54SX08-1TQG176I 176-tqfp (24x24 mm)
Configuración de pines para A54SX08-1TQG176I (encapsulado 176-tqfp (24x24 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para A54SX08-1TQG176I.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
A54SX08-1TQG176I es adecuado para 6 aplicacións: Industrial Control and Automation, Communications and Networking Glue Logic, Defense and Aerospace Embedded Logic, Legacy Board Continuation and Obsolescence Management, 5V-Tolerant Interface and Bridge Logic, Test and Measurement Instrumentation.
Industrial Control and Automation
The A54SX08-1TQG176I fits industrial control because its industrial temperature rating (-40C to +85C), 5 V-tolerant I/O operation (4.75 V to 5.25 V I/O rail), and non-volatile antifuse configuration remove the boot-time configuration step that SRAM FPGAs require on factory-floor equipment that must be live at power-up. In a PLC or motor-control interface card, the 128 user I/Os and 12,000 gates implement encoder interfaces, PWM generation, and safety-interlock glue logic with deterministic timing (0.35 um fabric toggling to 280 MHz). Because routing is fixed at programming, propagation delays do not vary with reconfiguration, simplifying certification of deterministic control paths.
Recomendado
Communications and Networking Glue Logic
In line cards, backplane bridges, and telecom adapters, the A54SX08-1TQG176I implements address decoding, bus formatting, and protocol adaptation between processors and PHY devices. Its 280 MHz toggle capability supports high-speed counters and shift-register functions, while the sea-of-modules fabric provides low, predictable interconnect delay for tight setup/hold budgets between the FPGA and companion ASICs. The 176-TQFP 24x24 mm footprint offers a practical 0.5 mm-pitch lead frame for two-layer routing of 128 I/Os, and the one-time-programmable configuration eliminates the configuration PROM that would otherwise occupy board space and add a boot sequence to the link bring-up time.
Recomendado
Defense and Aerospace Embedded Logic
Antifuse FPGAs are valued in defense and aerospace systems because the one-time-programmed configuration cannot be disturbed by radiation-induced configuration upsets, unlike SRAM fabrics. The A54SX08-1TQG176I provides 12,000 system gates for sensor interfaces, telemetry formatting, and redundant-signal voting logic in upgrade programs where the original Actel SX design must be maintained. The industrial -1 grade part suits ground-based and laboratory defense electronics, while the non-volatile fabric removes power-up configuration risk in mission equipment. Its deterministic routing also eases worst-case timing analysis required by high-reliability design reviews, and Microchip continues to support the family for legacy program continuity.
Recomendado
Legacy Board Continuation and Obsolescence Management
Programs maintaining boards designed around Actel SX devices rely on the A54SX08-1TQG176I for exact re-creation of the original logic image, since the antifuse bitstream remains archivable and re-programmable onto new dies indefinitely. When a production run needs more logic but cannot change the PCB, drop-in family upgrades in the same 176-TQFP footprint (A54SX16-TQG176I, A54SX32-1TQG176I) absorb design growth without respin. Because the SX08 design database compiles identically across speed-grade variants within the family, obsolescence managers can qualify A54SX08-2TQG176I as a second source with only timing re-verification, protecting against allocation shortages on the -1 grade.
Recomendado
5V-Tolerant Interface and Bridge Logic
Many industrial and test systems still run 5 V peripheral buses, and the A54SX08-1TQG176I directly accommodates a 4.75 V to 5.25 V I/O supply, eliminating the level-shifting buffers that modern 1.2-3.3 V FPGAs demand at every boundary. The 128 user I/Os connect to legacy SCSI, VME-style backplanes, and TTL sensor clusters, while the 3.0 V to 3.6 V core rail keeps dynamic power manageable. With 512 logic cells, the device implements bus arbitration, wait-state generation, and parallel-to-serial bridging between a 5 V host bus and 3.3 V peripherals, consolidating dozens of 74-series devices into one 24x24 mm TQFP and cutting board area and assembly cost.
Recomendado
Test and Measurement Instrumentation
Bench instruments and ATE fixtures benefit from the A54SX08-1TQG176I's predictable antifuse timing and instant-on operation: the programmed logic is active the moment power is applied, with no configuration latency that would skew time-stamped measurements. The 280 MHz toggle capability supports frequency counters, event timers, and pattern generators at moderate rates, while 128 I/Os drive probe matrices and relay-control arrays from one device. In fixture electronics that remain configured for years, one-time programming is an advantage because there is no configuration memory to corrupt. The industrial temperature range also permits use in temperature chambers and environmental test stations without derating.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para A54SX08-1TQG176I — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | A54SX08-2TQG176I | A54SX08-TQG176I | A54SX08-1TQG176 | A54SX16-TQG176I | A54SX32-1TQG176I |
|---|---|---|---|---|---|---|
| Package | 176-TQFP (24x24 mm) | 176-TQFP (24x24 mm) - same | 176-TQFP (24x24 mm) - same | 176-TQFP (24x24 mm) - same | 176-TQFP (24x24 mm) - same | 176-TQFP (24x24 mm) - same |
| Brand | Microsemi (Actel) | Microsemi (Actel) | Microsemi (Actel) | Microsemi (Actel) | Microsemi (Actel) | Microsemi (Actel) |
| System Gates | 12000 | 12000 | 12000 | 12000 | 24000 | 32000 |
| User I/Os | 128 | 128 | 128 | 128 | 128 | 128 |
| Speed Grade | -1 | -2 (faster) | Standard | -1 | Standard | -1 |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +85C (industrial) | 0C to +70C (commercial) | -40C to +85C (industrial) | -40C to +85C (industrial) |
| Supply Voltage | 3V-3.6V core, 4.75V-5.25V I/O | 3V-3.6V core, 4.75V-5.25V I/O | 3V-3.6V core, 4.75V-5.25V I/O | 3V-3.6V core, 4.75V-5.25V I/O | 3V-3.6V core, 4.75V-5.25V I/O | 3V-3.6V core, 4.75V-5.25V I/O |
| Programming Technology | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) |
| Design Migration Effort | Reference design | None - same die, timing only | None - same die, timing only | None - temp derating review only | Re-fit and timing re-verification | Re-fit and timing re-verification |
Diferenciadores clave
- Identical die with faster speed grade available (frente a A54SX08-2TQG176I)
- Industrial temperature rating (frente a A54SX08-1TQG176)
- Lowest-cost footprint-stable option for legacy designs (frente a A54SX16-TQG176I)
- 5 V I/O operation eliminated in modern FPGAs (frente a Modern SRAM FPGA families)
Notas de diseño
Provide two supply rails: a 3.3 V (3.0-3.6 V) core rail and a 5 V (4.75-5.25 V) I/O rail per Microchip USA data. Decouple each VCC pin pair with 0.1 uF ceramic capacitors placed within 5 mm of the pin, plus bulk 10 uF at the board entry. The VPP/VPCA/VPCB programming pins are used only during antifuse programming; on the production board tie them per the 54SX datasheet programming-pin recommendation (typically grounded through specified networks) and never power them in-system.
The 176-TQFP (24x24 mm) has a 0.5 mm lead pitch; use a 2-layer fan-out or 4-layer board with 5-mil trace/space for escape routing of 128 user I/Os. Place a solid ground plane under the device and flood copper on the signal layers to reduce ground bounce when many 5 V outputs switch simultaneously. The thermal path is through the leads, so generous copper pour on all four sides of the package improves dissipation; at SX08 densities a 4-layer board needs no dedicated heatsink.
The A54SX08-1TQG176I is one-time-programmable: a logic error in a soldered device is unrecoverable. Always run complete post-layout timing simulation in the Actel/Microchip Designer flow and program and functionally test at least one socketed sample before committing a production assembly. Also verify the ordering code suffix carefully - the non-I commercial version (0C to +70C) looks nearly identical on labels but will not meet the -40C to +85C industrial requirement.
When driving 5 V TTL buses from the 128 I/Os, add 22-33 ohm series resistors on lines longer than about 10 cm to damp reflections, since the 5 V-tolerant drivers have fast edges for a 0.35 um process. Keep clock inputs short and route them on an inner layer adjacent to ground. Estimated: with a 50 pF load per output, simultaneous switching of many outputs increases ground bounce - limit concurrent switching groups or spread them across I/O banks.
Información de cumplimiento
Compliance status for this specific ordering code is not stated in the verified web data; request a material declaration from Microchip Technology/Microchip USA.
