Analog Devices

AD783JR - 250 ns High-Speed Sample-and-Hold | Analog Devices

N.º de pieza: AD783JR ✗ Fin de vida
8-pin SOIC Package Up to 100 kHz Speed
MOQ: 1 |

AD783JR Descripción general

The Analog Devices AD783JR is a high-speed, monolithic, single-channel sample-and-hold amplifier with a typical acquisition time of 250 ns to 0.01%, supplied in an 8-pin SOIC package. It is designed for precision data-acquisition systems that require rapid settling, accurate hold-mode retention, and low distortion when capturing analog inputs for subsequent digitization.

A sample-and-hold amplifier is an analog sampling device that briefly acquires an input signal and then stores its voltage for a longer interval. The sample-and-hold category sits within analog signal-chain ICs and supports high-speed ADC front ends, instrumentation, oscilloscope acquisition circuits, and precision test equipment. By placing an ADC behind a sample-and-hold stage, the system can reduce acquisition-time requirements on the converter while preserving the sampled voltage during conversion.

The AD783's key acquisition characteristic is its typical 250 ns settling time to within 0.01%. The manufacturer also specifies the device for hold-mode total harmonic distortion testing with input frequencies up to 100 kHz. Its specified hold droop rate is 0.02 uV/us, which limits the rate at which the stored output changes during hold mode. These characteristics make the device useful where the sampling aperture and the accuracy of the held voltage both influence overall measurement quality.

The AD783 is a monolithic analog device rather than a switched-capacitor implementation. This architecture allows direct use in precision instrumentation and high-speed sampling systems, but it also requires correct control of the sample-and-hold timing and external hold capacitor. The analog input, reference, control, ground, and supply connections must be routed in accordance with the manufacturer pin-description table to minimize switching transients and acquisition error.

Typical applications include high-speed 12-bit and 14-bit analog-to-digital converter front ends, digital oscilloscope input channels, phase-sensitive measurement systems, and laboratory instrumentation. The manufacturer specifically identifies the AD783 as suitable for 12-bit and 14-bit ADC applications because its acquisition and hold behavior can reduce the effective demand placed on the converter during the sampling interval.

The principal design tradeoff is droop versus hold capacitance. A larger hold capacitor reduces droop in absolute microvolts per microsecond but generally requires more charge for rapid acquisition. Designers should therefore select the capacitor value, control timing, and input impedance together, and verify settling and acquisition performance in the complete analog layout.

This product analysis combines the manufacturer's device information, exact-MPN package identification, operating characteristics, pricing reference, and carefully qualified replacement considerations. It also highlights practical acquisition, droop, thermal, and layout issues engineers must address before using the AD783JR as a drop-in part in new or legacy equipment.

Alternativas directas para AD783JR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

AD783JR Valores máximos y características eléctricas

Product Type Monolithic sample-and-hold amplifier
Channel Count 1 circuit
Typical Acquisition Time 250 ns to 0.01%
Hold-Mode Test Input Frequency Up to 100 kHz
Hold Droop Rate 0.02 uV/us
Encapsulado 8-pin SOIC
Tipo de montaje Surface mount
J-Grade Availability 8-pin cerdip and SOIC packages
Military Temperature Version Package 8-pin cerdip package
Military Temperature Version Range -55 C to +125 C

Guía de configuración de pines de AD783JR 8-pin cerdip package

Configuración de pines para AD783JR (encapsulado 8-pin cerdip package). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 8-pin cerdip package para AD783JR

No hay datos detallados de patillaje disponibles para AD783JR.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

AD783JR es adecuado para 6 aplicacións: High-Speed ADC Front Ends, Digital Oscilloscope Acquisition, Precision Instrumentation, Phase-Sensitive Measurement, Legacy Data-Acquisition Systems, Test and Measurement Signal Capture.

⚡

High-Speed ADC Front Ends

The AD783JR is suited to the input stage of a 12-bit or 14-bit ADC because its typical acquisition time of 250 ns to 0.01% provides a defined interval for capturing the analog voltage. Placing it ahead of the converter can isolate the ADC input from changes during the conversion period. The design must coordinate the sample command, hold-capacitor value, source impedance, and ADC clock so that acquisition completes before the converter samples the stored value.

📺

Digital Oscilloscope Acquisition

The AD783JR can form the acquisition element of an oscilloscope input channel when the required settling interval is compatible with its 250 ns typical acquisition to 0.01%. The hold-mode droop of 0.02 uV/us must be checked against the full digitization interval because it can create a time-dependent measurement error. Input attenuation, protection, bandwidth, and channel isolation remain separate design tasks, while the sample-and-hold timing must be deterministic and repeatable.

🏭

Precision Instrumentation

In laboratory and industrial instrumentation, the AD783JR provides a dedicated analog hold function between a signal source and a downstream measurement device. Its 250 ns typical acquisition to 0.01% supports systems that need to capture a defined sample rather than follow a continuously changing input. Analog Devices also identifies testing up to 100 kHz in hold mode, making the device relevant to instrumentation requiring characterized dynamic hold-mode behavior.

🔧

Phase-Sensitive Measurement

The AD783JR can be used when a measurement cycle requires a stable analog value during a later comparison, conversion, or control interval. Its 250 ns acquisition time allows the circuit to settle to within 0.01% under suitable source and hold-capacitor conditions, while the 0.02 uV/us droop defines the expected drift during hold mode. Trigger timing should be arranged so acquisition, hold, and measurement intervals do not overlap unintentionally.

🖥️

Legacy Data-Acquisition Systems

The AD783JR is especially relevant when repairing or replicating a legacy data-acquisition system whose original schematic relies on an AD783-family sample-and-hold amplifier. Retaining the established part can preserve the intended acquisition timing and analog behavior without redesigning the board. Before substitution, compare every SOIC-8 connection, the hold-capacitor value, control polarity, supply arrangement, and acquisition requirements across the full input range.

📡

Test and Measurement Signal Capture

The AD783JR can capture a rapidly changing input for subsequent processing in a test system where acquisition must reach 0.01% before the measurement proceeds. Its characterized hold droop of 0.02 uV/us allows the system designer to relate stored-value error to the selected hold duration. Practical implementation requires controlled trigger delay, adequate source drive, carefully placed hold capacitance, and verification of distortion with the intended input frequency and signal amplitude.

What is the AD783JR and what is its typical acquisition time?
The AD783JR is a single-channel, high-speed monolithic sample-and-hold amplifier in an 8-pin SOIC package, with a typical acquisition time of 250 ns to 0.01%. According to the Analog Devices AD783 product information, the device is intended for precision acquisition circuits, including front ends for high-speed 12-bit and 14-bit analog-to-digital converters. Its stored-output accuracy depends on the selected hold capacitor, input resistance, control timing, and PCB layout.
Where can I download the AD783JR datasheet PDF?
The AD783JR datasheet PDF can be downloaded from the Analog Devices AD783 product page or the manufacturer-hosted AD783 PDF linked in the product resources. The product page identifies the J and A grades in 8-pin cerdip and SOIC packages and directs military-temperature users to the Analog Devices Military Products Databook or AD783/883B data sheet. Use the manufacturer documentation for the complete pin description, timing definitions, and acquisition test conditions.
Where can I find the AD783JR pinout and SOIC-8 connection details?
The AD783JR pinout is identified in the Analog Devices AD783 manufacturer documentation and uses an 8-pin SOIC footprint. Before assigning PCB tracks, use the pin-description table in the datasheet because sample, hold, input, output, reference, supply, and ground functions must be connected exactly as specified. The commercial J-grade package is confirmed as 8-pin SOIC, while the military-temperature version uses an 8-pin cerdip package and is not the same mechanical option.
What is the hold droop rate of the AD783JR?
The AD783JR has a specified hold droop rate of 0.02 uV/us. This means that the stored output can drift by 0.02 microvolts for each microsecond spent in hold mode. The effect becomes more significant during longer conversion or measurement intervals, so system timing should be coordinated with the droop specification and the capacitance selected for the hold node.
What are the key specifications of AD783JR that engineers should know?
The central AD783JR specifications are one sampling channel, a typical 250 ns acquisition time to 0.01%, a 0.02 uV/us hold droop rate, and an 8-pin SOIC package. Analog Devices also specifies and tests hold-mode total harmonic distortion with input frequencies up to 100 kHz. The device is a monolithic sample-and-hold amplifier intended for high-speed ADC front ends and precision instrumentation.
Is the AD783JR suitable for a 12-bit or 14-bit ADC front end?
Yes, the AD783JR is specifically suitable for high-speed 12-bit and 14-bit ADC front ends because it can acquire the analog input to 0.01% in a typical 250 ns interval. Analog Devices identifies this use in the AD783 documentation. The complete design must still account for hold droop, capacitor selection, control timing, reference accuracy, and acquisition settling in the actual board layout.
What can replace the AD783JR in an existing design?
No replacement should be treated as guaranteed without checking its pinout and acquisition specifications. The identified functional alternatives include the LF398, SHC603, and ISL59312, but their packages, acquisition times, and control behavior must be compared with the AD783JR before substitution. For legacy maintenance, use the Request a Quote form on this page to identify sourcing and obtain current availability information for the exact AD783JR MPN.
Is the SHC603 a drop-in replacement for the AD783JR?
The SHC603 is identified as a functional equivalent to the AD783JR, but a drop-in decision requires verified SOIC-8 pin compatibility and equivalent acquisition, hold, droop, supply, and control timing. The available cross-reference information does not establish every one of those conditions. Treat it as a candidate replacement and verify it against the manufacturer data sheet and the original circuit before installing it.
AD783JR versus LF398: which is better for a fast ADC?
The AD783JR is the better starting point when the original design specifically requires its 250 ns typical acquisition to 0.01% and 0.02 uV/us droop characteristics. The LF398 is identified as a functional equivalent, but it is not established here as a same-package, pin-to-pin drop-in part. Choose it only after confirming package pins, acquisition time, hold capacitor requirements, and control polarity.
When should I choose the AD783JR instead of another sample-and-hold amplifier?
Choose the AD783JR when maintaining a legacy circuit that specifically depends on its 250 ns typical acquisition to 0.01%, 0.02 uV/us hold droop, and established 8-pin SOIC implementation. Choose another candidate only when its acquisition time, hold error, control interface, reference arrangement, and pinout have been validated against the original design. For obsolete-part maintenance, preserving the original architecture often reduces board redesign risk.
Is AD783JR or its replacement better for oscilloscope input channels?
The AD783JR fits an oscilloscope acquisition channel when its 250 ns typical settling to 0.01% satisfies the required acquisition interval and the hold droop remains acceptable. A replacement should be selected only after its pinout and dynamic acquisition performance are proven equivalent. The AD783 is particularly relevant where the circuit was originally designed around the documented 0.02 uV/us droop behavior.
How should the AD783JR hold capacitor and acquisition timing be selected?
The hold capacitor and acquisition timing must be selected together because a larger capacitor generally lowers droop while requiring more charge to settle during acquisition. Use the AD783 manufacturer data sheet for the supported capacitance range and timing recommendations, then include input-source impedance and control-driver delay in the calculation. Verify the completed circuit across its operating input range rather than relying only on the nominal 250 ns figure.
What is the lifecycle status of the AD783JR?
The AD783JR is treated as obsolete for product-page and sourcing purposes. The exact MPN is an older Analog Devices sample-and-hold amplifier in an 8-pin SOIC package, and a secondary product listing identifies it as obsolete. Use the Request a Quote form on this page for current stock, lead time, minimum order quantity, and legacy sourcing options.
Where can I buy AD783JR online and what is its current price?
Use the Request a Quote form on this page to request the current AD783JR price, stock, lead time, and minimum order quantity. The available listing shows a price-from reference rather than a qualifying quantity-break table, so no fixed tier is published here. The product is an obsolete legacy device, and request the exact AD783JR suffix to avoid unintended substitution of a different grade or package.
What is the lead time and stock status for AD783JR?
Current stock and lead time for AD783JR should be requested through the Request a Quote form on this page because this product is categorized as obsolete and no authoritative fixed lead-time statement is available. When requesting a quote, specify the exact AD783JR MPN, required quantity, acceptable packaging, and whether any date-code or traceability requirements apply for legacy equipment maintenance.

Datos de referencia de ingeniería para AD783JR — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the AD783JR when maintaining an established 8-pin SOIC design that depends on a typical 250 ns acquisition to 0.01% and a specified 0.02 uV/us hold droop. Its strength is compatibility with legacy instrumentation and ADC acquisition arrangements rather than availability as a current catalog choice. LF398, SHC603, and ISL59312 are identified as functional equivalents, but the available information does not establish identical pinout, package, control polarity, acquisition time, and droop for every candidate. Treat them as redesign candidates rather than guaranteed drop-in replacements. Before substituting any part, compare the complete SOIC-8 pin assignment, supply and reference requirements, hold-capacitor recommendation, acquisition timing, droop, distortion, and temperature grade. For repair work where original circuit behavior is critical, retaining an exact AD783JR is generally the lowest-risk choice once availability is confirmed.

Notas de diseño

Do not treat the nominal 250 ns acquisition time as a complete timing specification. Account for the delay of the sample-control signal, source impedance, hold-capacitor charging, comparator or ADC aperture time, and clock-to-control propagation delay. Confirm the circuit reaches the required accuracy at the lowest expected input amplitude and fastest intended acquisition command.

Keep the input, hold-capacitor, and output paths short and place associated high-frequency bypass components close to their pins. Provide a low-impedance return for the reference and supply returns, and avoid routing digital control traces adjacent to sensitive analog nodes. The sample-command transition can inject disturbance into the held charge, so its timing relative to conversion must be reviewed.

Decouple the supply with capacitors selected according to the manufacturer recommendations and place them immediately across the relevant pins. Estimated design checks should use the actual supply voltage, load current, source impedance, and measured switching activity rather than assuming ideal behavior. Verify startup, settling, and temperature performance because a quick acquisition requirement can increase demand on the supply and reference network.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No authoritative RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact AD783JR MPN.

Búsquedas relacionadas

AD783JR datasheet AD783JR pinout AD783JR datasheet pdf AD783JR equivalent AD783JR replacement AD783JR cross reference AD783JR vs LF398 AD783JR SOIC-8 footprint AD783JR acquisition time AD783JR hold droop Analog Devices AD783JR AD783JR ADC front end AD783JR price AD783JR stock

Componentes & términos relacionados

Analog Devices AD783 AD783JR LF398 SHC603 ISL59312 sample-and-hold amplifier sample-and-hold SHA monolithic analog IC analog signal chain high-speed ADC front end 12-bit ADC 14-bit ADC acquisition time hold droop total harmonic distortion SOIC-8 QFN family surface mount SMD oscilloscope acquisition precision instrumentation legacy data-acquisition systems
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ