AD8429ARZ - 1nV/√Hz Ultra-Low Noise In-Amp | Analog Devices
N.º de pieza: AD8429ARZ ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $8.5 | $8,50 |
| 10 | $7.65 | $76,50 |
| 100 | $6.8 | $680,00 |
| 500 | $6.12 | $3.060,00 |
| 1.000 | $5.5 | $5.500,00 |
AD8429ARZ Descripción general
An instrumentation amplifier (in-amp) is a type of differential amplifier that amplifies the difference between two input signals while rejecting common-mode voltages. It is a specialized variant of an operational amplifier, optimized for high input impedance, high common-mode rejection ratio (CMRR), and precise gain setting with a single external resistor. In-amps are essential in precision measurement systems, bridging the gap between small sensor outputs and the input range of ADCs.
Key features of the AD8429 include a fixed gain of 2000 with access to internal nodes for flexibility, low input voltage noise of 1 nV/√Hz, and high CMRR of 140 dB minimum. It also offers excellent DC accuracy with gain drift of 5 ppm/°C, offset drift of 0.3 µV/°C, and gain accuracy of 0.05%. The device operates over a wide supply range and is specified for -40°C to +125°C, ensuring reliable performance in harsh environments.
The AD8429 uses a three-op-amp topology with laser-trimmed thin-film resistors, achieving high precision and stability. Its high CMRR increases with gain, effectively rejecting common-mode interference from power lines and other sources. The REF pin allows level shifting for single-supply operation, and the device is protected with ESD diodes on the inputs.
Typical applications include precision data acquisition, medical instrumentation (ECG, EEG), strain gauge and bridge amplifiers, and industrial process control. The ultralow noise and high CMRR make it particularly suited for measuring microvolt-level signals in noisy environments.
When designing with the AD8429, ensure proper grounding and shielding to minimize noise pickup. The REF pin should be driven with a low-impedance source (<1 Ω) for best performance, and input protection resistors may be needed for overvoltage conditions.
Alternativas directas para AD8429ARZ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con AD8429ARZ (mismo factor de forma y huella) — difiere en Operating Temperature Range, Package, Amplifier Type, Gain Range, Input Bias Current.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
AD8429BRZ
✅ Sustitución directa✓ En stock
$6.85 / unidad
Ver hoja de datos →AD8429ARZ-R7
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
AD8429BRZ-R7
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
AD8221ARZ
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$3.29 / unidad
Ver hoja de datos →AD620ARZ
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$7.2 / unidad
Ver hoja de datos →AD8429ARZ Valores máximos y características eléctricas
| Device Type | Instrumentation Amplifier |
| Number of Channels | 1 |
| Input Voltage Noise | 1 nV/√Hz |
| CMRR (Minimum) | 140 dB |
| Gain (Fixed) | 2000 |
| Gain Drift | 5 ppm/°C |
| Offset Drift | 0.3 µV/°C |
| Gain Accuracy | 0.05% |
| 3 dB Bandwidth | 15 MHz |
| Rango de temperatura de funcionamiento | -40°C to +125°C |
| Encapsulado | 8-SOIC |
| Estilo de montaje | Surface Mount |
| Número de pines | 8 |
| Estado RoHS | Compliant |
Configuración de pines de AD8429ARZ
| Pin 1 | -IN — Inverting input |
| Pin 2 | RG — Gain setting resistor connection |
| Pin 3 | RG — Gain setting resistor connection |
| Pin 4 | -VS — Negative supply |
| Pin 5 | REF — Reference voltage for level shifting |
| Pin 6 | OUT — Output |
| Pin 7 | +VS — Positive supply |
| Pin 8 | +IN — Non-inverting input |
Aplicaciones típicas
AD8429ARZ es adecuado para 6 aplicacións: Precision Data Acquisition, Medical Instrumentation (ECG/EEG), Strain Gauge and Bridge Amplifiers, Industrial Process Control, Audio Test and Measurement, Vibration Monitoring.
Precision Data Acquisition
The AD8429ARZ's ultralow noise of 1 nV/√Hz and high CMRR of 140 dB make it ideal for precision data acquisition systems. It accurately amplifies small sensor signals while rejecting common-mode noise, ensuring high-resolution measurements. The wide temperature range of -40°C to +125°C allows use in industrial environments. Its fixed gain of 2000 simplifies design, and the REF pin enables level shifting for single-supply ADCs.
Recomendado
Medical Instrumentation (ECG/EEG)
In medical instrumentation like ECG and EEG, the AD8429ARZ excels due to its ultralow noise and high CMRR, which are critical for capturing microvolt-level biopotential signals. The 1 nV/√Hz noise ensures minimal signal degradation, while the 140 dB CMRR rejects 50/60 Hz power line interference. The wide temperature range and small SOIC package make it suitable for portable and wearable devices. The REF pin allows easy level shifting for single-supply operation.
Recomendado
Strain Gauge and Bridge Amplifiers
The AD8429ARZ is well-suited for strain gauge and bridge amplifier applications due to its high gain accuracy of 0.05% and low offset drift of 0.3 µV/°C. It provides precise amplification of bridge outputs, which are typically in the millivolt range. The high CMRR of 140 dB rejects common-mode voltages from the bridge supply, ensuring accurate measurements. Its wide temperature range makes it ideal for industrial load cells and pressure sensors.
Recomendado
Industrial Process Control
In industrial process control, the AD8429ARZ provides reliable amplification of sensor signals in harsh environments. Its operating temperature range of -40°C to +125°C ensures performance in extreme conditions. The high CMRR of 140 dB rejects interference from motors and power lines, while the low noise of 1 nV/√Hz preserves signal integrity. The fixed gain of 2000 simplifies calibration, and the device's robustness makes it suitable for 4-20 mA loop transmitters.
Recomendado
Audio Test and Measurement
The AD8429ARZ's ultralow noise and high bandwidth of 15 MHz make it suitable for audio test and measurement equipment. It can accurately amplify low-level audio signals without adding significant noise, preserving the dynamic range. The high CMRR ensures rejection of common-mode hum and interference. The device's precision and stability make it ideal for audio analyzers and distortion measurement systems.
Recomendado
Vibration Monitoring
For vibration monitoring, the AD8429ARZ provides the low noise and high CMRR needed to amplify signals from piezoelectric accelerometers. The 1 nV/√Hz noise ensures that small vibrations are not masked, while the 140 dB CMRR rejects interference from machinery. The wide temperature range allows deployment in industrial settings. The fixed gain of 2000 simplifies signal conditioning, and the REF pin enables interface with single-supply ADCs.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para AD8429ARZ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | AD8429BRZ | AD8221ARZ | AD620ARZ |
|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Input Voltage Noise | 1 nV/√Hz | 1 nV/√Hz | 8 nV/√Hz | 9 nV/√Hz |
| CMRR (Minimum) | 140 dB | 140 dB | 90 dB | 100 dB |
| Gain | 2000 (fixed) | 2000 (fixed) | 1 to 1000 (set by resistor) | 1 to 1000 (set by resistor) |
| 3 dB Bandwidth | 15 MHz | 15 MHz | 825 kHz | 120 kHz |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | -40°C to +85°C | -40°C to +85°C |
Diferenciadores clave
- Ultralow input voltage noise of 1 nV/√Hz (frente a AD8221ARZ)
- High CMRR of 140 dB minimum (frente a AD620ARZ)
- Wide temperature range of -40°C to +125°C (frente a AD8221ARZ)
Notas de diseño
For optimal noise performance, use a solid ground plane and keep input traces short and shielded. Place decoupling capacitors (0.1 µF and 10 µF) close to the supply pins. Avoid routing digital signals near the input pins to prevent coupling.
The REF pin must be driven with a low-impedance source (<1 Ω) to maintain CMRR. Do not exceed the REF pin voltage beyond ±0.3 V of the supplies, as it is protected with ESD diodes. Ensure input voltages stay within the common-mode range to avoid output saturation.
The AD8429ARZ in an 8-SOIC package has a typical thermal resistance (θJA) of around 100°C/W. For high supply voltages and output currents, ensure adequate PCB copper area for heat dissipation. In most precision measurement applications, power dissipation is low, but verify worst-case conditions.
Información de cumplimiento
RoHS compliant per distributor data. No AEC-Q100 qualification indicated.
