ATXMEGA256D3-MH - 32MHz AVR MCU with 256KB Flash | Microchip
N.º de pieza: ATXMEGA256D3-MH ✓ ActivoATXMEGA256D3-MH Descripción general
An 8/16-bit AVR microcontroller combines a Harvard-architecture processor with embedded flash, EEPROM, SRAM, and programmable peripherals in one integrated device. The XMEGA D3 family extends the familiar AVR ecosystem with a four-channel event system, programmable multi-level interrupt handling, and high-resolution peripherals for embedded control, communications, and signal-processing applications. Its dual-controller architecture supports deterministic task separation and efficient real-time event handling.
Key features include 256 KB of read-while-write ISP Flash with an 8 KB boot-code section, 4 KB of EEPROM, 16 KB of SRAM, and operation up to 32 MHz. The device provides 16-channel 12-bit ADC capability, advanced timers, communication interfaces, and flexible pin multiplexing. These resources allow the MCU to consolidate functions that might otherwise require several discrete analog and digital components.
The ATxmega256D3 platform combines a 32 MHz core, event-system routing, and programmable interrupt priorities for responsive embedded designs. Read-while-write Flash allows firmware data to remain accessible during programming operations, while the boot-code section supports controlled startup and update workflows. The 1.6 V to 3.6 V operating range is suitable for low-voltage industrial, consumer, and communications equipment operating from regulated 3.3 V rails or compatible lower-voltage sources.
Typical applications include industrial control and factory automation, communication nodes, sensor acquisition systems, compact motor controllers, measurement instruments, and low-power embedded products. Its combination of memory, analog conversion, timing peripherals, and event-driven control makes it particularly useful when board space and deterministic response are important.
PCB design should preserve the exposed-pad thermal and electrical requirements of the VQFN. Place input and output decoupling capacitors close to their associated supply pins, provide a low-impedance ground plane, and follow the manufacturer pin-assignment table when assigning multiplexed I/O functions. Confirm boot, programming, and clock options against the device documentation before releasing production firmware.
This product page combines manufacturer specifications, package and ordering details, supported programming information, comparison guidance, and practical implementation notes to support component selection, schematic review, PCB planning, and sourcing decisions.
Alternativas directas para ATXMEGA256D3-MH — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ATXMEGA256D3-MH (mismo factor de forma y huella) — difiere en Package, Program Memory Type, Supply Voltage Range.
ATXMEGA256D3-MNR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ATXMEGA256D3-MH Valores máximos y características eléctricas
| Microcontroller Family | AVR XMEGA D3 |
| Architecture | 8/16-bit AVR |
| Frecuencia de reloj máxima | 32 MHz |
| Program Memory Size | 256 KB (128K x 16) |
| Program Memory Type | ISP Flash |
| Boot Code Section | 8 KB |
| Read-While-Write | Supported |
| EEPROM Size | 4 KB |
| SRAM Size | 16 KB |
| Supply Voltage Range | 1.6 V to 3.6 V |
| ADC Resolution | 12-bit |
| ADC Channels | 16 channels |
| Event System | 4 channels |
| Encapsulado | 64-pin VQFN with exposed pad, 9 x 9 mm |
| Tipo de montaje | Surface mount |
| Temperatura de funcionamiento | -40°C to +85°C |
| Packing Media | Tray, 260 units |
| Lead Count | 64 pins |
| Country of Origin | South Korea or Taiwan |
| Green Product | Yes |
Guía de configuración de pines de ATXMEGA256D3-MH 64-pin vqfn with exposed pad, 9 x 9 mm
Configuración de pines para ATXMEGA256D3-MH (encapsulado 64-pin vqfn with exposed pad, 9 x 9 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para ATXMEGA256D3-MH.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
ATXMEGA256D3-MH es adecuado para 6 aplicacións: Industrial Sensor Acquisition, Compact Motor Controller, Communication Gateway Node, Measurement and Control Instrument, Automated Test Equipment, Low-Power Embedded Product.
Industrial Sensor Acquisition
The ATXMEGA256D3-MH fits compact sensor nodes that need fast sampling, local configuration storage, and deterministic control without a separate processor. Its 16-channel 12-bit ADC capability supports analog measurement channels, while 16 KB of SRAM provides working space for filtering and data handling. The 32 MHz AVR core can execute acquisition, filtering, and communication tasks concurrently through interrupt and event mechanisms. A 3.3 V rail falls within the specified 1.6 V to 3.6 V operating range, and the -40°C to +85°C grade suits industrial equipment. Designers should budget analog front-end headroom, reference accuracy, and input settling time for the selected sensor.
Recomendado
Compact Motor Controller
The ATXMEGA256D3-MH is suitable for compact motor-control modules where timer resources, fast control updates, and limited PCB space are important. Its 32 MHz processing capability supports current sampling, duty-cycle updates, fault handling, and supervisory logic, while the event system can coordinate timing-sensitive internal signals. Sixteen 12-bit ADC channels permit sensing multiple analog quantities associated with motor current, position, temperature, or supply voltage. The device must be paired with suitable power electronics and gate-driver circuitry; the MCU controls rather than replaces the high-current switching stage. Layout should isolate analog returns and power-switching currents from precision measurement paths.
Recomendado
Communication Gateway Node
The ATXMEGA256D3-MH can serve as a protocol-conversion or communications gateway node where firmware size, peripheral integration, and low-voltage operation are priorities. Its 256 KB ISP Flash accommodates networking stacks, protocol handlers, configuration tables, and bootloader code, while 4 KB of EEPROM preserves calibration or network settings across power cycles. AVR UART, SPI, and I2C resources allow the controller to interface with transceivers, sensors, and storage devices. The 32 MHz core supports responsive packet handling, and read-while-write Flash simplifies applications that update data while executing firmware. Interface signal integrity and protocol timing should be verified against each peripheral specification.
Recomendado
Measurement and Control Instrument
The ATXMEGA256D3-MH is appropriate for portable measurement instruments that combine signal acquisition, calibration, display support, and communication in a compact controller. The 16-channel 12-bit ADC supports multiple sensor inputs, while 16 KB of SRAM can hold measurement buffers and the 4 KB EEPROM can retain calibration coefficients. Its event system and programmable interrupt architecture help organize time-critical sampling and control operations. The 1.6 V to 3.6 V supply range enables integration with low-voltage analog sections, although each subsystem still needs suitable buffering and grounding. For laboratory or medical designs, validate accuracy, isolation, safety, and compliance requirements at the finished-system level.
Recomendado
Automated Test Equipment
The ATXMEGA256D3-MH fits automated test equipment requiring deterministic sequencing, programmable I/O, communications, and local nonvolatile storage. Its four-channel event system can coordinate triggers between timers, communications, and external interfaces, while the 32 MHz core performs measurement sequencing and result processing. The 256 KB Flash supports embedded test routines and update logic, and the 16 KB SRAM can buffer intermediate results. The 64-pin VQFN package helps preserve board area in multi-channel systems, although exposed-pad layout is critical. Designers should separate test inputs from high-energy drive stages, use controlled reference sources, and verify timing margins for synchronized measurements.
Recomendado
Low-Power Embedded Product
The ATXMEGA256D3-MH is suitable for compact embedded products that balance processing speed, memory capacity, and low-voltage operation. Its 256 KB Flash and 16 KB SRAM permit local control and communication without external storage, while the four-channel event system reduces polling overhead in responsive designs. Operating from a 1.6 V to 3.6 V supply supports integration with energy-efficient 3.3 V power systems. In battery-powered equipment, use the device’s clock, sleep, and peripheral controls according to the manufacturer’s power-management guidance, and confirm wake-up timing and active current under the final operating profile. Firmware must distinguish fast-start measurement tasks from low-leakage sleep states.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ATXMEGA256D3-MH — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ATXMEGA256D3-MNR |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 64-pin VQFN (9 x 9 mm) | 64-pin VQFN (9 x 9 mm) |
| Product Family | ATxmega256D3 | ATxmega256D3 |
Diferenciadores clave
- Large integrated memory configuration (frente a ATXMEGA256D3-MNR)
- Deterministic event-driven control (frente a ATXMEGA256A3U-MH)
- Specified industrial temperature grade (frente a ATXMEGA256D3-MNR)
- Analog and timing integration (frente a ATXMEGA256A3U-MH)
Notas de diseño
The 64-pin VQFN includes an exposed thermal pad that must be connected to the ground plane using the manufacturer’s land-pattern and via guidance. Keep the pad electrically continuous and avoid placing aggressive switching-current paths directly beneath the MCU. Thermal performance depends on board size, copper area, via count, ambient temperature, and switching-node placement, so verify junction-temperature margin in the final layout rather than relying on package dimensions alone.
Place every required decoupling capacitor close to the corresponding AVCC, DVCC, or other supply pins, with a short and low-inductance connection to the ground plane. Separate sensitive analog returns from digital and power-conversion currents where the package permits. Assign externally connected pins only after checking their alternate functions, analog thresholds, and startup states in the official pin-assignment table.
Treat analog inputs, crystal or clock signals, programming signals, and communication interfaces according to their dedicated pin classes. Use a continuous ground reference under routed signals, avoid long parallel returns, and keep switching regulators and fast-edge clock lines separated from precision ADC inputs. If an external crystal is used, follow the required load capacitance, grounding, and placement recommendations in the manufacturer hardware design guidance.
Do not substitute a different XMEGA family solely because it has similar memory or the same pin count. ATxmega256D3-MH and ATxmega256A3U-MH have different family identities and peripheral behavior, even though both use a 64-pin QFN package. Also distinguish -MH tray packaging from -MHR reel packaging, and confirm the required industrial temperature grade, boot configuration, clock source, and fuse settings before approving a substitute.
Información de cumplimiento
The Microchip ordering record identifies the device as green, but no specific RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification statement was provided. AEC-Q100 is not applicable to the standard industrial-temperature ordering option unless separately qualified.