Silicon Labs

EFM32LG332F64-QFP64 - 48MHz Cortex-M3 64KB MCU | Silicon Labs

N.º de pieza: EFM32LG332F64-QFP64 ✓ Activo
1.98 V to 3.8 V Vdss 0.65 µA Id 64-pin TQFP, 10 mm x 10 mm Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

EFM32LG332F64-QFP64 Descripción general

Silicon Labs EFM32LG332F64-QFP64 is a 32-bit ARM Cortex-M3 microcontroller rated up to 48 MHz, with 64 KB of flash memory, 32 KB of RAM, and a 64-pin TQFP package. The device operates from a 1.98 V to 3.8 V supply and supports 2.5 V and 3.3 V systems. Its combination of USB, AES hardware security, integrated analog and digital peripherals, and low-energy operating modes makes it suitable for compact embedded control, sensor, and connected products.

A microcontroller is a programmable system-on-chip containing a processor core, memory, and peripherals such as communications interfaces, timers, analog converters, and GPIO. The EFM32LG belongs to the Leopard Gecko family, combining an ARM Cortex-M3 core with Silicon Labs low-energy techniques. This hierarchy places it within 32-bit microcontrollers, embedded processors, and semiconductor-based control devices used to execute firmware and supervise surrounding hardware.

The EFM32LG332F64-QFP64 provides 48 MHz processing performance and 64 KB of flash for firmware. Its 32 KB RAM supports working data, stack space, and application state. Integrated USB, AES, and extensive peripheral resources reduce the need for external interface or security chips. According to the Silicon Labs EFM32LG data sheet, the family consumes as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode, supporting designs where standby energy use is important.

The Leopard Gecko architecture uses an industry-standard 32-bit ARM Cortex-M3 processor and emphasizes energy efficiency through low-power modes, fast wake-up behavior, and autonomous peripheral operation. Autonomous peripherals can perform selected tasks while the processor sleeps, reducing active processing time in periodic sensing and monitoring systems. High analog and digital integration also permits compact implementations without requiring separate converters, communication controllers, or security engines.

Typical uses include low-energy sensor nodes, industrial monitoring equipment, portable measurement instruments, USB-connected accessories, security and access-control terminals, and embedded consumer products. A 48 MHz Cortex-M3 core is useful for protocol handling, control loops, and moderate user-interface logic, while the 64-pin package provides a generous pin count for mixed analog and digital designs.

When laying out this device, assign every power and ground connection according to the package data and keep sensitive analog inputs away from fast-switching digital nets. Firmware should use the low-energy peripheral features and avoid unnecessary polling. Confirm the exact pin multiplexing, debug interface, and decoupling requirements against the manufacturer data sheet before releasing the PCB layout.

This product page combines core electrical characteristics, power-management guidance, package information, and same-footprint alternatives into a design-oriented reference. It also distinguishes exact-family replacements from options that change memory capacity or device qualification, helping engineers assess PCB reuse and firmware implications before selecting a replacement.

Alternativas directas para EFM32LG332F64-QFP64 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

EFM32LG332F64G-F-QFP64

✅ Sustitución directa
📦 64-pin TQFP, 10 mm x 10 mm
Same 64 KB flash and 32 KB RAM configuration; grade and suffix differ by 0 performance parameters.

📋 Alternativa de referencia (no en el catálogo)

EFM32LG332F64G-E-QFP64R

✅ Sustitución directa
📦 64-pin TQFP, 10 mm x 10 mm
Same 64 KB flash, 32 KB RAM, and 48 MHz core; grade, suffix, and reel packaging designation differ.

📋 Alternativa de referencia (no en el catálogo)

EFM32LG332F64-QFP64T

✅ Sustitución directa
📦 64-pin TQFP, 10 mm x 10 mm
Same 64 KB flash, 32 KB RAM, and 48 MHz core; temperature or ordering suffix differs by 0 core parameters.

📋 Alternativa de referencia (no en el catálogo)

EFM32LG332F256G-QFP64

✅ Sustitución directa
📦 64-pin TQFP, 10 mm x 10 mm
Flash increases from 64 KB to 256 KB, a 300% increase; RAM and 48 MHz core remain unchanged.

📋 Alternativa de referencia (no en el catálogo)

EFM32LG332F64-QFP64 Valores máximos y características eléctricas

Processor Core ARM Cortex-M3, 32-bit RISC
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
RAM 32 KB
Supply Voltage Range 1.98 V to 3.8 V
Nominal Supply Voltage 2.5 V or 3.3 V
Stop Mode Current 0.65 µA
Run Mode Current 211 µA/MHz
Interfaz USB
Security Feature AES hardware encryption
Series EFM32 Leopard Gecko
Encapsulado 64-pin TQFP, 10 mm x 10 mm
Tipo de montaje Surface mount
Architecture ARMv7-M
Operating Mode Run and Stop low-power modes

Guía de configuración de pines de EFM32LG332F64-QFP64 64-pin tqfp, 10 mm x 10 mm

Configuración de pines para EFM32LG332F64-QFP64 (encapsulado 64-pin tqfp, 10 mm x 10 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 64-pin tqfp, 10 mm x 10 mm para EFM32LG332F64-QFP64

No hay datos detallados de patillaje disponibles para EFM32LG332F64-QFP64.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

EFM32LG332F64-QFP64 es adecuado para 6 aplicacións: Low-Energy Sensor Nodes, USB Connected Measurement Instruments, Industrial Monitoring and Control, Battery-Powered Portable Products, Secure Access and Authentication Terminals, Smart Home and IoT Sensor Hubs.

🧩

Low-Energy Sensor Nodes

The EFM32LG332F64-QFP64 fits periodic environmental sensing because its Stop-mode consumption can reach 0.65 µA while the 48 MHz Cortex-M3 core provides enough performance for filtering, compensation, and local data processing. Use a 64 KB flash image for the application firmware and 32 KB RAM for measurement buffers and operating state. Configure sensors and timers to wake the processor periodically rather than polling continuously, allowing the EFM32LG's low-energy architecture to dominate standby consumption. Validate the complete battery path with the regulator quiescent current, sensor sleep current, wake interval, and transmission duration because the MCU value alone does not determine total system life.

🔧

USB Connected Measurement Instruments

The EFM32LG332F64-QFP64 is suitable for USB-connected measurement instruments because it integrates a 48 MHz ARM Cortex-M3 core, 64 KB of flash, 32 KB of RAM, and USB in one 64-pin TQFP device. Firmware can acquire sensor data, apply calibration, format results, and present a USB interface without requiring a separate protocol controller. AES hardware encryption can protect stored data or authenticated transfers when required by the product security model. Layout USB routing as a controlled impedance interface, maintain the specified power-supply decoupling, and confirm transceiver or connector requirements against the complete USB design reference.

🏭

Industrial Monitoring and Control

The EFM32LG332F64-QFP64 supports industrial monitoring and control tasks that combine periodic acquisition, local decision logic, communications, and low idle consumption. Its 48 MHz Cortex-M3 core can execute control loops and communications routines, while 64 KB of flash is appropriate for a focused monitoring application and 32 KB of RAM supports working buffers. The integrated peripheral set can reduce the component count in a compact control terminal. Confirm the industrial temperature grade and ordering suffix, validate analog input limits, and provide appropriate protection and isolation at the board boundary before connecting the device to field wiring.

📱

Battery-Powered Portable Products

The EFM32LG332F64-QFP64 is appropriate for battery-powered portable products where standby current and active efficiency both matter. Run-mode consumption of 211 µA/MHz and Stop-mode consumption of 0.65 µA provide a useful foundation for duty-cycled operation, while the 48 MHz core handles responsive user input or short processing bursts. Use the low-power modes to separate long idle intervals from brief measurement or communications tasks, and size the energy budget from average rather than peak current. The final battery-life estimate must include regulator losses, radio or sensor activity, wake-up timing, and the capacity and self-discharge of the selected cell.

🔥

Secure Access and Authentication Terminals

The EFM32LG332F64-QFP64 can serve as the controller in access-control and authentication terminals that require hardware-assisted AES operations and a compact mixed-signal footprint. The 48 MHz Cortex-M3 core manages credential processing, local user-interface logic, event logging, and communications, while 32 KB of RAM supports transaction buffers and protocol state. AES hardware acceleration reduces the processing burden of cryptographic workloads, but it must be paired with correct key management, secure boot practices, and protected storage. Match the exact device suffix to the product's environmental and qualification requirements before production release.

🌐

Smart Home and IoT Sensor Hubs

The EFM32LG332F64-QFP64 fits a compact smart-home or IoT sensor hub that must aggregate inputs, run local logic, and maintain low standby power. Its integrated USB and AES capabilities support connected accessories and protected device data, while the 64-pin TQFP package provides access to a broad mix of GPIO and peripheral functions. Firmware can use autonomous peripheral features to collect events and trigger the processor only when meaningful data is available. Use the 256 KB flash family member only when the additional firmware storage is required; otherwise the 64 KB version provides a more compact software and memory footprint.

Resumen de productos recomendados

EFM32LG332F64G-F-QFP64 Same-family low-power MCU option Se usa en: Low-Energy Sensor Nodes, Industrial Monitoring and Control, Battery-Powered Portable Products, Secure Access and Authentication Terminals EFM32LG332F64G-E-QFP64R Same-family low-power MCU option Se usa en: Low-Energy Sensor Nodes, Industrial Monitoring and Control, Secure Access and Authentication Terminals EFM32LG332F64-QFP64T Same-footprint instrument controller option Se usa en: USB Connected Measurement Instruments, Battery-Powered Portable Products, Smart Home and IoT Sensor Hubs EFM32LG332F256G-QFP64 Higher-flash option for expanded firmware Se usa en: USB Connected Measurement Instruments, Smart Home and IoT Sensor Hubs
What are the key specifications of EFM32LG332F64-QFP64 that engineers should know?
The EFM32LG332F64-QFP64 combines a 48 MHz 32-bit ARM Cortex-M3 core, 64 KB of flash memory, 32 KB of RAM, USB, and AES hardware encryption in a 64-pin TQFP package. According to the Silicon Labs EFM32LG data sheet, the device operates from 1.98 V to 3.8 V and consumes as little as 0.65 µA in Stop mode. These characteristics make it relevant to compact, low-energy embedded products where processing speed, peripheral integration, and standby consumption all influence the design.
Where can I download the EFM32LG332F64-QFP64 datasheet PDF?
The official EFM32LG family data sheet is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/efm32lg-datasheet.pdf. It is the primary document for electrical characteristics, package drawings, pin multiplexing, memory maps, peripheral operation, and recommended application circuits. Use the pin-description and electrical-characteristics tables when assigning board functions and checking operating limits rather than relying only on catalog summaries.
Where can I find the EFM32LG332F64-QFP64 pinout?
The EFM32LG332F64-QFP64 pinout is found in the package-drawing and pin-description sections of the official Silicon Labs EFM32LG data sheet. The device uses a 64-pin TQFP package, and its multiplexed pins may support several peripheral functions depending on firmware configuration. Review the alternate-function tables before laying out an LED matrix, serial interface, analog input, or debug connection because one physical pin can serve multiple functions.
What is the EFM32LG332F64-QFP64 operating voltage range?
The EFM32LG332F64-QFP64 operates from 1.98 V to 3.8 V and supports nominal 2.5 V and 3.3 V supply arrangements. The 1.98 V lower limit gives designers some margin around a 2.5 V rail, while the 3.8 V upper limit accommodates regulated 3.3 V systems. Check the complete electrical-characteristics table for operating-mode limits, voltage tolerances, and timing conditions before selecting the system supply.
How much flash memory and RAM does the EFM32LG332F64-QFP64 have?
The EFM32LG332F64-QFP64 includes 64 KB of flash memory and 32 KB of RAM. Flash stores the programmed firmware and nonvolatile data, while RAM provides working memory for the stack, variables, buffers, and real-time processing. According to the Silicon Labs EFM32LG data sheet, the processor operates at up to 48 MHz, allowing the memory configuration to support control logic, communications stacks, and moderate data handling.
Why is the EFM32LG332F64-QFP64 suitable for low-power applications?
The EFM32LG332F64-QFP64 is designed for energy-conscious operation, consuming as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode according to the Silicon Labs EFM32LG data sheet. Its autonomous peripherals can handle selected tasks while the processor remains inactive, helping periodic sensor and monitoring products reduce active runtime. Actual battery life still depends on the firmware duty cycle, sensor load, regulator efficiency, and wake-up frequency.
What is the best drop-in replacement for EFM32LG332F64-QFP64?
The closest pin-compatible choices are qualified EFM32LG332F64 variants using the same 64-pin TQFP footprint, but qualification, temperature range, and suffix meaning must be checked before substitution. The EFM32LG332F256G-F-QFP64 has the same package and processor family but increases flash from 64 KB to 256 KB, so it is not an electrically identical replacement. Confirm the exact suffix, pin functions, timing, and qualification requirements in the manufacturer documentation.
Can EFM32LG332F64-QFP64T replace EFM32LG332F64-QFP64?
The EFM32LG332F64-QFP64T can serve as a same-family, same-footprint option when its temperature and ordering suffix matches the intended assembly requirements. It retains the 64-pin TQFP format and the EFM32LG332F64 memory configuration. Before treating it as a direct replacement, verify the suffix definition in the manufacturer ordering information and confirm that every used pin, peripheral, and electrical limit remains unchanged.
Is the EFM32LG332F64-G-E-QFP64R a drop-in alternative?
The EFM32LG332F64-G-E-QFP64R uses the same EFM32LG332F64 device family and QFP64 footprint, making it a candidate for board reuse. Its grade and suffix determine suitability for the target temperature range, qualification environment, and production packaging. The EFM32LG332F64-G-E-QFP64R should therefore be treated as a conditional same-family alternative rather than an unconditional substitute until its ordering code and temperature requirements have been compared.
When should I choose the EFM32LG332F64-QFP64 over a larger-memory EFM32LG332 variant?
Choose the EFM32LG332F64-QFP64 when 64 KB of flash and 32 KB of RAM meet the firmware requirement and the 64-pin package fits the board. Choose the 256 KB flash variant when the application needs substantially more firmware storage, but validate memory compatibility and device configuration before redesign. The 256 KB option is useful for larger protocol stacks or feature sets, but it is not a parameter-identical drop-in replacement for the 64 KB device.
Is the EFM32LG332F64-QFP64 suitable for USB-connected sensor products?
The EFM32LG332F64-QFP64 is suitable for USB-connected sensor products because it combines a 48 MHz ARM Cortex-M3 core, 64 KB of flash, 32 KB of RAM, USB, and AES hardware encryption. These resources support firmware protection, data acquisition, communications, and low-power control in one device. The board design must still provide the required USB impedance routing, power management, protection, and firmware support for the selected USB role.
What is the difference between EFM32LG332F64-QFP64 and EFM32LG332F256G-F-QFP64?
The primary difference is flash capacity: EFM32LG332F64-QFP64 provides 64 KB, while EFM32LG332F256G-F-QFP64 provides 256 KB, an increase of 192 KB or 300%. Both use a 64-pin TQFP package and belong to the EFM32LG332 Cortex-M3 family. The larger-memory part may require different startup or device-specific configuration, so verify startup behavior, software constraints, and qualification requirements before substitution.
Where can I buy EFM32LG332F64-QFP64 and check its current lead time?
Use the Request a Quote form on this page to request EFM32LG332F64-QFP64 pricing, current stock status, minimum order quantity, and production lead time. The request should include your required quantity, date code policy, target packaging, and shipping destination. A current quotation provides the most appropriate commercial response because component availability and lead time can change independently of the device's electrical characteristics.
Is the EFM32LG332F64-QFP64 currently in stock?
Current EFM32LG332F64-QFP64 stock status should be confirmed through the Request a Quote form on this page. Submit the required quantity, packaging preference, and delivery schedule so the current supply position can be matched to the production plan. Treat stock confirmation and a manufacturing lead-time commitment as separate procurement items, particularly when the order includes date-code or traceability requirements.
How much does the EFM32LG332F64-QFP64 cost?
Submit the EFM32LG332F64-QFP64 Request a Quote form for current pricing and quantity-break terms. The quotation should reflect the exact order quantity, package form, date-code requirements, and delivery destination. Static component prices become outdated quickly, so using the form provides a current commercial response and lets the order be evaluated against the intended production volume.
What should engineers verify when comparing EFM32LG332F64-QFP64 alternatives?
Verify the package, complete pin map, alternate peripheral functions, supply range, flash and RAM capacity, temperature grade, qualification status, and startup configuration. A shared 64-pin TQFP footprint alone does not guarantee drop-in compatibility. Review the Silicon Labs ordering information and device data sheet for every candidate, then verify that existing firmware, bootloader assumptions, PCB routing, and regulatory requirements remain valid after substitution.

Datos de referencia de ingeniería para EFM32LG332F64-QFP64 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the EFM32LG332F64-QFP64 when a project needs a 48 MHz ARM Cortex-M3 controller with 64 KB of flash, 32 KB of RAM, USB, AES, and low standby consumption in a 64-pin TQFP. It is a strong fit for periodic sensor nodes, connected measurement instruments, access terminals, and compact industrial controllers. Select EFM32LG332F64G-F-QFP64 or EFM32LG332F64G-E-QFP64R when their qualification, temperature, or ordering characteristics better match the assembly. Select EFM32LG332F64-QFP64T after confirming the meaning of the T suffix. Use EFM32LG332F256G-QFP64 when the firmware requires 256 KB of flash rather than 64 KB, but review memory and startup implications. Before any substitution, verify the pin map, alternate functions, clock setup, temperature range, qualification, and firmware requirements.

Comparación con alternativas

Parámetro Este producto EFM32LG332F64G-F-QFP64 EFM32LG332F64G-E-QFP64R EFM32LG332F64-QFP64T EFM32LG332F256G-QFP64
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 64-pin TQFP, 10 mm x 10 mm 64-pin TQFP, 10 mm x 10 mm 64-pin TQFP, 10 mm x 10 mm 64-pin TQFP, 10 mm x 10 mm 64-pin TQFP, 10 mm x 10 mm
Processor Core 32-bit ARM Cortex-M3 32-bit ARM Cortex-M3 32-bit ARM Cortex-M3 32-bit ARM Cortex-M3 32-bit ARM Cortex-M3
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 64 KB 64 KB 64 KB 64 KB 256 KB
RAM 32 KB 32 KB 32 KB 32 KB 32 KB
Supply Voltage Range 1.98 V to 3.8 V 1.98 V to 3.8 V 1.98 V to 3.8 V 1.98 V to 3.8 V 1.98 V to 3.8 V
Stop Mode Current 0.65 µA 0.65 µA 0.65 µA 0.65 µA 0.65 µA
Run Mode Current 211 µA/MHz 211 µA/MHz 211 µA/MHz 211 µA/MHz 211 µA/MHz
USB and AES Hardware Features USB and AES USB and AES USB and AES USB and AES USB and AES

Diferenciadores clave

  • Lower flash footprint for focused firmware (frente a EFM32LG332F256G-QFP64)
  • Ultra-low Stop-mode consumption (frente a EFM32LG332F64-QFP64T)
  • Integrated connectivity and security (frente a EFM32LG332F64G-E-QFP64R)

Notas de diseño

Design the supply for the complete operating state, not only the 48 MHz maximum frequency. The family can consume 211 µA/MHz in Run mode and as little as 0.65 µA in Stop mode, so the regulator should remain stable across load transitions and low-current operation. Follow the manufacturer decoupling and external-component recommendations, place the required capacitors at the associated supply pins, and include the USB transceiver and analog loads in the worst-case supply-budget calculation.

Assign pins from the EFM32LG332 package alternate-function tables before committing the PCB. The 64-pin TQFP offers many multiplexed functions, but swapping a communication, timer, or debug signal can alter firmware and peripheral configuration. Reserve the required programming and debug connections, maintain the manufacturer's clock layout, and verify exposed-pad or thermal requirements against the exact package drawing before release.

Do not treat a shared TQFP64 footprint as sufficient proof of interchangeability. The G, F, E, R, and T suffixes can encode grade, temperature, packaging, or qualification information, while the 256 KB flash option changes memory capacity by 300%. Compare the ordering code, startup assumptions, temperature range, pin functions, and qualification status before using any alternative in an approved production design.

Keep USB traces, clock signals, and fast-switching outputs separated from sensitive analog inputs and references. Use a continuous ground reference, return analog grounds to the appropriate quiet reference, and follow the manufacturer placement guidance for decoupling capacitors and external crystals. For USB interfaces, apply the required controlled-impedance geometry and keep the route free of stubs, test pads, and unrelated high-current paths.

Use the EFM32LG's autonomous peripheral and low-power features deliberately instead of relying only on processor sleep. Periodic measurement products can wake on a timer, process a small batch, and return to Stop mode before the next event. Avoid interrupt-driven polling when a peripheral can perform the operation automatically. Validate wake-up behavior and current measurements with the complete peripheral configuration because enabling timers, comparators, or communication blocks can change the final energy profile.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No explicit compliance declarations were identified for the exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with Silicon Labs before release.

Datos verificados el: 2026-11-10 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

EFM32LG332F64-QFP64 datasheet EFM32LG332F64-QFP64 specifications EFM32LG332F64-QFP64 pinout EFM32LG332F64-QFP64 datasheet pdf EFM32LG332F64-QFP64 equivalent EFM32LG332F64-QFP64 replacement EFM32LG332F64-QFP64 cross reference EFM32LG332F64-QFP64 price EFM32LG332F64-QFP64 stock Silicon Labs EFM32LG332F64-QFP64 EFM32LG332F64 QFP64 footprint EFM32LG332F64 low power application circuit EFM32LG332F64-QFP64 vs EFM32LG332F256G-QFP64 EFM32LG332F64-QFP64 programming

Componentes & términos relacionados

Silicon Labs EFM32LG332F64-QFP64 EFM32LG332F64G-F-QFP64 EFM32LG332F64G-E-QFP64R EFM32LG332F64-QFP64T EFM32LG332F256G-QFP64 ARM Cortex-M3 ARMv7-M architecture EFM32 Leopard Gecko 32-bit RISC microcontroller microcontroller embedded processor semiconductor 64 KB flash memory 32 KB RAM 48 MHz USB AES hardware encryption Stop mode Run mode 0.65 µA 211 µA/MHz 64-pin TQFP TQFP package family surface mount
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ