EFM32LG332F64-QFP64 - 48MHz Cortex-M3 64KB MCU | Silicon Labs
MPN: EFM32LG332F64-QFP64 ✓ 啟用中EFM32LG332F64-QFP64 概覽
A microcontroller is a programmable system-on-chip containing a processor core, memory, and peripherals such as communications interfaces, timers, analog converters, and GPIO. The EFM32LG belongs to the Leopard Gecko family, combining an ARM Cortex-M3 core with Silicon Labs low-energy techniques. This hierarchy places it within 32-bit microcontrollers, embedded processors, and semiconductor-based control devices used to execute firmware and supervise surrounding hardware.
The EFM32LG332F64-QFP64 provides 48 MHz processing performance and 64 KB of flash for firmware. Its 32 KB RAM supports working data, stack space, and application state. Integrated USB, AES, and extensive peripheral resources reduce the need for external interface or security chips. According to the Silicon Labs EFM32LG data sheet, the family consumes as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode, supporting designs where standby energy use is important.
The Leopard Gecko architecture uses an industry-standard 32-bit ARM Cortex-M3 processor and emphasizes energy efficiency through low-power modes, fast wake-up behavior, and autonomous peripheral operation. Autonomous peripherals can perform selected tasks while the processor sleeps, reducing active processing time in periodic sensing and monitoring systems. High analog and digital integration also permits compact implementations without requiring separate converters, communication controllers, or security engines.
Typical uses include low-energy sensor nodes, industrial monitoring equipment, portable measurement instruments, USB-connected accessories, security and access-control terminals, and embedded consumer products. A 48 MHz Cortex-M3 core is useful for protocol handling, control loops, and moderate user-interface logic, while the 64-pin package provides a generous pin count for mixed analog and digital designs.
When laying out this device, assign every power and ground connection according to the package data and keep sensitive analog inputs away from fast-switching digital nets. Firmware should use the low-energy peripheral features and avoid unnecessary polling. Confirm the exact pin multiplexing, debug interface, and decoupling requirements against the manufacturer data sheet before releasing the PCB layout.
This product page combines core electrical characteristics, power-management guidance, package information, and same-footprint alternatives into a design-oriented reference. It also distinguishes exact-family replacements from options that change memory capacity or device qualification, helping engineers assess PCB reuse and firmware implications before selecting a replacement.
直接替換替代品,適用於 EFM32LG332F64-QFP64 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
EFM32LG332F64G-F-QFP64
✅ 直接替換📋 參考替代品(不在目錄中)
EFM32LG332F64G-E-QFP64R
✅ 直接替換📋 參考替代品(不在目錄中)
EFM32LG332F64-QFP64T
✅ 直接替換📋 參考替代品(不在目錄中)
EFM32LG332F256G-QFP64
✅ 直接替換📋 參考替代品(不在目錄中)
EFM32LG332F64-QFP64 最大額定值與電氣特性
| Processor Core | ARM Cortex-M3, 32-bit RISC |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| RAM | 32 KB |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Nominal Supply Voltage | 2.5 V or 3.3 V |
| Stop Mode Current | 0.65 µA |
| Run Mode Current | 211 µA/MHz |
| 介面 | USB |
| Security Feature | AES hardware encryption |
| Series | EFM32 Leopard Gecko |
| 封裝 | 64-pin TQFP, 10 mm x 10 mm |
| 安裝類型 | Surface mount |
| Architecture | ARMv7-M |
| Operating Mode | Run and Stop low-power modes |
EFM32LG332F64-QFP64 64-pin tqfp, 10 mm x 10 mm 腳位配置指南
EFM32LG332F64-QFP64(64-pin tqfp, 10 mm x 10 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: EFM32LG332F64-QFP64.
請參閱 資料表 以查看完整腳位配置。
典型應用
EFM32LG332F64-QFP64 適用於 6 應用s: Low-Energy Sensor Nodes, USB Connected Measurement Instruments, Industrial Monitoring and Control, Battery-Powered Portable Products, Secure Access and Authentication Terminals, Smart Home and IoT Sensor Hubs.
Low-Energy Sensor Nodes
The EFM32LG332F64-QFP64 fits periodic environmental sensing because its Stop-mode consumption can reach 0.65 µA while the 48 MHz Cortex-M3 core provides enough performance for filtering, compensation, and local data processing. Use a 64 KB flash image for the application firmware and 32 KB RAM for measurement buffers and operating state. Configure sensors and timers to wake the processor periodically rather than polling continuously, allowing the EFM32LG's low-energy architecture to dominate standby consumption. Validate the complete battery path with the regulator quiescent current, sensor sleep current, wake interval, and transmission duration because the MCU value alone does not determine total system life.
推薦
USB Connected Measurement Instruments
The EFM32LG332F64-QFP64 is suitable for USB-connected measurement instruments because it integrates a 48 MHz ARM Cortex-M3 core, 64 KB of flash, 32 KB of RAM, and USB in one 64-pin TQFP device. Firmware can acquire sensor data, apply calibration, format results, and present a USB interface without requiring a separate protocol controller. AES hardware encryption can protect stored data or authenticated transfers when required by the product security model. Layout USB routing as a controlled impedance interface, maintain the specified power-supply decoupling, and confirm transceiver or connector requirements against the complete USB design reference.
推薦
Industrial Monitoring and Control
The EFM32LG332F64-QFP64 supports industrial monitoring and control tasks that combine periodic acquisition, local decision logic, communications, and low idle consumption. Its 48 MHz Cortex-M3 core can execute control loops and communications routines, while 64 KB of flash is appropriate for a focused monitoring application and 32 KB of RAM supports working buffers. The integrated peripheral set can reduce the component count in a compact control terminal. Confirm the industrial temperature grade and ordering suffix, validate analog input limits, and provide appropriate protection and isolation at the board boundary before connecting the device to field wiring.
推薦
Battery-Powered Portable Products
The EFM32LG332F64-QFP64 is appropriate for battery-powered portable products where standby current and active efficiency both matter. Run-mode consumption of 211 µA/MHz and Stop-mode consumption of 0.65 µA provide a useful foundation for duty-cycled operation, while the 48 MHz core handles responsive user input or short processing bursts. Use the low-power modes to separate long idle intervals from brief measurement or communications tasks, and size the energy budget from average rather than peak current. The final battery-life estimate must include regulator losses, radio or sensor activity, wake-up timing, and the capacity and self-discharge of the selected cell.
推薦
Secure Access and Authentication Terminals
The EFM32LG332F64-QFP64 can serve as the controller in access-control and authentication terminals that require hardware-assisted AES operations and a compact mixed-signal footprint. The 48 MHz Cortex-M3 core manages credential processing, local user-interface logic, event logging, and communications, while 32 KB of RAM supports transaction buffers and protocol state. AES hardware acceleration reduces the processing burden of cryptographic workloads, but it must be paired with correct key management, secure boot practices, and protected storage. Match the exact device suffix to the product's environmental and qualification requirements before production release.
推薦
Smart Home and IoT Sensor Hubs
The EFM32LG332F64-QFP64 fits a compact smart-home or IoT sensor hub that must aggregate inputs, run local logic, and maintain low standby power. Its integrated USB and AES capabilities support connected accessories and protected device data, while the 64-pin TQFP package provides access to a broad mix of GPIO and peripheral functions. Firmware can use autonomous peripheral features to collect events and trigger the processor only when meaningful data is available. Use the 256 KB flash family member only when the additional firmware storage is required; otherwise the 64 KB version provides a more compact software and memory footprint.
推薦
推薦產品摘要
工程參考資料,適用於 EFM32LG332F64-QFP64 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EFM32LG332F64G-F-QFP64 | EFM32LG332F64G-E-QFP64R | EFM32LG332F64-QFP64T | EFM32LG332F256G-QFP64 |
|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-pin TQFP, 10 mm x 10 mm | 64-pin TQFP, 10 mm x 10 mm | 64-pin TQFP, 10 mm x 10 mm | 64-pin TQFP, 10 mm x 10 mm | 64-pin TQFP, 10 mm x 10 mm |
| Processor Core | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 256 KB |
| RAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| Supply Voltage Range | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V |
| Stop Mode Current | 0.65 µA | 0.65 µA | 0.65 µA | 0.65 µA | 0.65 µA |
| Run Mode Current | 211 µA/MHz | 211 µA/MHz | 211 µA/MHz | 211 µA/MHz | 211 µA/MHz |
| USB and AES Hardware Features | USB and AES | USB and AES | USB and AES | USB and AES | USB and AES |
主要差異化特點
- Lower flash footprint for focused firmware (對比EFM32LG332F256G-QFP64)
- Ultra-low Stop-mode consumption (對比EFM32LG332F64-QFP64T)
- Integrated connectivity and security (對比EFM32LG332F64G-E-QFP64R)
設計說明
Design the supply for the complete operating state, not only the 48 MHz maximum frequency. The family can consume 211 µA/MHz in Run mode and as little as 0.65 µA in Stop mode, so the regulator should remain stable across load transitions and low-current operation. Follow the manufacturer decoupling and external-component recommendations, place the required capacitors at the associated supply pins, and include the USB transceiver and analog loads in the worst-case supply-budget calculation.
Assign pins from the EFM32LG332 package alternate-function tables before committing the PCB. The 64-pin TQFP offers many multiplexed functions, but swapping a communication, timer, or debug signal can alter firmware and peripheral configuration. Reserve the required programming and debug connections, maintain the manufacturer's clock layout, and verify exposed-pad or thermal requirements against the exact package drawing before release.
Do not treat a shared TQFP64 footprint as sufficient proof of interchangeability. The G, F, E, R, and T suffixes can encode grade, temperature, packaging, or qualification information, while the 256 KB flash option changes memory capacity by 300%. Compare the ordering code, startup assumptions, temperature range, pin functions, and qualification status before using any alternative in an approved production design.
Keep USB traces, clock signals, and fast-switching outputs separated from sensitive analog inputs and references. Use a continuous ground reference, return analog grounds to the appropriate quiet reference, and follow the manufacturer placement guidance for decoupling capacitors and external crystals. For USB interfaces, apply the required controlled-impedance geometry and keep the route free of stubs, test pads, and unrelated high-current paths.
Use the EFM32LG's autonomous peripheral and low-power features deliberately instead of relying only on processor sleep. Periodic measurement products can wake on a timer, process a small batch, and return to Stop mode before the next event. Avoid interrupt-driven polling when a peripheral can perform the operation automatically. Validate wake-up behavior and current measurements with the complete peripheral configuration because enabling timers, comparators, or communication blocks can change the final energy profile.
合規資訊
No explicit compliance declarations were identified for the exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with Silicon Labs before release.