EPF10K200SRC240-1N - 200K FLEX 10KE FPGA, 240-BFQFP | Intel
N.º de pieza: EPF10K200SRC240-1N ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $95 | $95,00 |
| 10 | $88.5 | $885,00 |
| 100 | $79.2 | $7.920,00 |
| 500 | $72.8 | $36.400,00 |
| 1.000 | $68.4 | $68.400,00 |
EPF10K200SRC240-1N Descripción general
An FPGA (Field-Programmable Gate Array) is a reprogrammable semiconductor device containing an array of configurable logic blocks (CLBs / LABs), programmable interconnect, and I/O cells that engineers can customize via a hardware description language (HDL). Within the broader hierarchy, an FPGA belongs to programmable logic devices -> digital logic ICs -> integrated circuits -> semiconductors. FPGAs fill the gap between fixed-function ASICs (high NRE, high volume) and discrete glue logic (low density, fixed function), enabling rapid prototyping, low-volume production, and field upgradability.
Key features include 9,984 logic elements (cells), 1,248 LABs, 182 I/O pins, embedded array blocks for memory, and a maximum internal operating frequency of 250 MHz. The device is built on SRAM-based configuration cells, supporting in-system reprogrammability via the Altera/Intel Quartus or MAX+PLUS II design flows. It is rated for commercial operating temperature grades and uses the 240-pin BQFP exposed-pad package for improved thermal dissipation in surface-mount reflow processes.
The FLEX 10KE architecture combines a fine-grained logic fabric with coarse-grained EABs, allowing efficient implementation of wide multiplexers, arithmetic functions, and small FIFOs without consuming general-purpose routing. Configuration data is stored in an SRAM cell, requiring a configuration device or microcontroller for in-system programming. The exposed pad on the BQFP package provides a low-thermal-resistance path to the PCB, important for the high toggle rates typical of 200K-gate designs.
Typical applications include industrial control glue logic, legacy telecommunications interface cards, low-volume prototyping adapters, custom peripheral bridges, and educational digital-design platforms. The wide I/O count and embedded memory make it suitable for systems that require parallel datapath processing combined with control logic. Because the silicon is older and the family is in obsolescence transition, it is most commonly deployed as a long-life replacement for installed equipment rather than for green-field designs.
When designing with this device, allocate sufficient PCB area for the exposed thermal pad and follow Intel/Altera application notes for JTAG chain configuration and in-system programming. Because the EPF10K200SRC240-1N is a mature part approaching end-of-life, designers should validate long-term supply and consider newer Cyclone or MAX families for new programs.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping procurement and design engineers evaluate the EPF10K200SRC240-1N against modern substitutes.
Alternativas directas para EPF10K200SRC240-1N — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con EPF10K200SRC240-1N (mismo factor de forma y huella) — difiere en Process Technology, Family, Operating Temperature, Package, Speed Grade.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
EPF10K200SRC240-1X
✅ Sustitución directa✓ En stock
$540 / unidad
Ver hoja de datos →EPF10K200SRC240-2
✅ Sustitución directa✓ En stock
$62.5 / unidad
Ver hoja de datos →EPF10K200SRC240-1
✅ Sustitución directa✓ En stock
$112 / unidad
Ver hoja de datos →EPF10K200SRC240-3N
✅ Sustitución directa✓ En stock
$162 / unidad
Ver hoja de datos →EPF10K200SRC240-2N
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
EPF10K200SRC240-1N Valores máximos y características eléctricas
| Family | FLEX 10KE |
| Series | EPF10K200 |
| Logic Elements / Cells | 9,984 |
| Equivalent Gates | 200,000 |
| Logic Array Blocks (LABs) | 1,248 |
| Number of I/Os | 182 |
| Supply Voltage (Core) | 2.5 V |
| Maximum Operating Frequency | 250 MHz |
| Process Technology | 0.22 µm CMOS |
| Encapsulado | 240-BFQFP Exposed Pad (RQFP-240) |
| Tipo de montaje | Surface Mount |
| Configuration Memory | SRAM-based |
| Embedded Array Blocks (EABs) | Yes |
| Operating Temperature Grade | Commercial |
| Estado RoHS | Compliant |
Guía de configuración de pines de EPF10K200SRC240-1N 240-bfqfp exposed pad (rqfp-240)
Configuración de pines para EPF10K200SRC240-1N (encapsulado 240-bfqfp exposed pad (rqfp-240)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para EPF10K200SRC240-1N.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
EPF10K200SRC240-1N es adecuado para 6 aplicacións: Industrial Glue Logic Replacement, Legacy Telecom Interface Cards, Datapath and Arithmetic Accelerators, Custom Peripheral Bridge Adapters, Test & Measurement Instrumentation, Education and HDL Training Platforms.
Industrial Glue Logic Replacement
The EPF10K200SRC240-1N fits legacy industrial control boards that historically used multiple discrete PAL/GAL devices and 74-series glue logic. With 9,984 logic elements, 182 user I/Os, and embedded array blocks, it can replace many small PLDs while integrating timing, handshaking, and bus arbitration functions onto one reprogrammable device. Designers can keep the existing 240-BFQFP footprint and surface-mount reflow profile, avoiding PCB rework. Because the silicon is mature, deterministic behavior simplifies verification in safety-conscious industrial settings.
Recomendado
Legacy Telecom Interface Cards
Telecom line cards, multiplexing backplanes, and TDM/E1 converters frequently used FLEX 10KE 200K-gate FPGAs in the early 2000s. The EPF10K200SRC240-1N provides 182 I/Os, abundant logic for parallel bus interfaces, and embedded array blocks for small FIFOs and elastic buffers needed in serial-protocol adaptation. Maintaining these cards with the original pin-compatible part avoids costly board redesigns and preserves vendor-qualified timing margins. The SRAM-based configuration also supports field firmware updates via JTAG or a small EPC configuration device.
Recomendado
Datapath and Arithmetic Accelerators
The 1,248 Logic Array Blocks combined with embedded array blocks make the EPF10K200SRC240-1N well suited for parallel datapath and arithmetic functions such as CRC engines, scramblers, and bus-width converters. Its 250 MHz internal frequency supports multi-gigabit datapath throughput, while the wide 182-I/O count accommodates 32- to 64-bit buses without external multiplexing. Designers can implement wide adders, multipliers, and barrel shifters using dedicated carry-chain paths inside the LABs, saving general-purpose routing resources and improving timing closure on legacy code paths.
Recomendado
Custom Peripheral Bridge Adapters
Custom peripheral bridges that translate between processor buses (PCI, VME, ISA, custom) and external peripherals often used FLEX 10KE 200K FPGAs as the central glue device. The EPF10K200SRC240-1N's 182 I/Os support multiple parallel interfaces simultaneously, while embedded array blocks implement FIFOs and addressable registers. Designers can keep the same part across multiple adapter SKUs by changing only the bitstream, simplifying inventory. The exposed-pad 240-BFQFP package offers thermal headroom for continuous bidirectional bus traffic.
Recomendado
Test & Measurement Instrumentation
Test and measurement instruments often require custom timing generators, parallel pattern generators, and protocol analyzers. The EPF10K200SRC240-1N delivers 9,984 logic elements plus embedded array blocks for compact waveform memories, pattern FIFOs, and counters. The 240-BFQFP package provides 182 I/Os to drive multi-channel parallel stimulus or capture buses. Reusing the original part in legacy instruments preserves factory calibration tables and avoids re-characterizing new silicon, which would invalidate ISO/IEC 17025 traceability records.
Recomendado
Education and HDL Training Platforms
Universities and engineering schools commonly use FLEX 10KE 200K-gate FPGAs on FPGA trainer boards to teach HDL design, synthesis, and timing closure. The EPF10K200SRC240-1N provides enough logic for student projects ranging from UART cores to VGA controllers to simple RISC-V soft CPUs. The mature Altera/Intel Quartus and MAX+PLUS II toolchains offer free or low-cost licenses ideal for academic environments. Used boards with this part are widely available on the secondary market at low cost, making labs affordable.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para EPF10K200SRC240-1N — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | EPF10K200SRC240-1X | EPF10K200SRC240-2 | EPF10K200SRC240-1 | EPF10K200SRC240-3N | EPF10K200SRC240-2N |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 240-BFQFP Exposed Pad | 240-BFQFP Exposed Pad | 240-BFQFP Exposed Pad | 240-BFQFP | 240-BFQFP Exposed Pad | 240-BFQFP Exposed Pad |
| Logic Elements | 9,984 | 9,984 | 9,984 | 9,984 | 9,984 | 9,984 |
| Speed Grade | 1 (commercial) | 1 (commercial) | 2 (faster) | 1 (commercial) | 3 (slower) | 2 (faster) |
| Terminal Finish | Lead-free (NiPdAu) | SnPb (non-RoHS) | Lead-free | Lead-free | Lead-free | Lead-free |
| Number of I/Os | 182 | 182 | 182 | 182 | 182 | 182 |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
| Core Voltage | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
Diferenciadores clave
- Lead-free terminal finish (frente a EPF10K200SRC240-1X)
- Exposed-pad thermal dissipation (frente a EPF10K200SRC240-1)
- Speed-grade 1 timing margin (frente a EPF10K200SRC240-2)
Notas de diseño
Estimated: With 9,984 logic elements running at 250 MHz, the EPF10K200SRC240-1N can dissipate up to 1-2 W under full toggle activity. The 240-BFQFP exposed-pad package provides a direct thermal path to the PCB. Designers should attach the exposed pad to a copper pour of at least 1 square inch with multiple thermal vias to keep junction temperatures within the commercial range. Without proper thermal management, hotspots can reduce long-term reliability even at moderate ambient temperatures.
Follow Intel/Altera layout guidelines for 240-BFQFP packages: use a 0.5 mm pitch land pattern with NSMD pads, fan out signals on inner layers with via-in-pad only when required for signal integrity, and place decoupling capacitors as close to the VCCINT/VCCIO pins as possible. Decoupling values per the FLEX 10KE datasheet include 0.1 µF ceramic near each VCCINT pin and 10 µF bulk tantalum or ceramic at the supply rail entry. Ground bounce on the wide I/O buses is mitigated by keeping the VCCIO and GND plane pair intact across the package.
Because the EPF10K200SRC240-1N is SRAM-based, configuration data is volatile and must be reloaded on every power-up. Always pair the FPGA with an EPC2 or EPC4 configuration device, or drive configuration via a microcontroller. A common mistake is assuming the FPGA retains its bitstream after power-down. Also verify JTAG chain integrity before production: open JTAG pins (TCK, TMS, TDI, TDO) or wrong order in the chain will prevent programming and fail silently during factory test.
Información de cumplimiento
RoHS-compliant lead-free finish per the 'N' suffix in the MPN. Lifecycle is obsolete; refer to Intel/Altera PCN database for last-time-buy and obsolescence history.