Texas Instruments

LM2903M/SL160222 - Dual Differential Comparator | Texas Instruments

N.º de pieza: LM2903M/SL160222 ✓ Activo
Single supply Vdss 8-pin SOIC Package
MOQ: 1 |

LM2903M/SL160222 Descripción general

The Texas Instruments LM2903M/SL160222 is a dual differential comparator containing two independent precision voltage comparators in an 8-pin SOIC package. It supports single-supply operation, provides an input offset voltage specification as low as 2.0 mV maximum for two comparators, and uses open-collector outputs. The device is intended for general-purpose signal comparison, threshold detection, industrial control, and interface applications.

A comparator is an analog integrated circuit that compares two input voltages and changes its output state when the non-inverting input exceeds the inverting input. The comparator category sits within analog signal-processing ICs, alongside amplifiers and voltage references, while remaining distinct from a general-purpose operational amplifier. The LM2903 architecture combines two independent channels in one package, reducing board area when two comparison functions are required.

The LM2903 family is designed to operate from a single power supply over a wide voltage range. According to the manufacturer datasheet, the offset voltage can be specified as low as 2.0 mV maximum for the two-comparator configuration. Open-collector outputs permit wired connections to pull-up circuitry and provide a flexible interface to TTL, MOS, and CMOS-compatible systems. Each channel offers separate inverting, non-inverting, and output terminals.

Because the two sections are electrically independent, engineers can use one channel for a sensor threshold and the second for a system interlock or control signal. The single-supply architecture is useful in equipment where one supply rail defines the comparator signal domain. Input and output operating conditions, channel-to-channel behavior, supply-current characteristics, and absolute maximum ratings should be checked against the exact manufacturer ordering information before production release.

Typical applications include industrial sensor interfaces, battery-powered monitoring circuits, overvoltage and undervoltage detection, motor-control logic, window comparators, and digital threshold conditioning. In each case, open-collector outputs can drive a pull-up and logic gate, or serve as an active-low alert signal. The small SOIC footprint also supports compact control boards where two independent channels are valuable.

For robust layouts, route comparator inputs away from switching nodes and power inductors, place input-referred bypassing close to the supply pin, and pull each open-collector output up to the appropriate logic supply. Check that the pull-up voltage, input common-mode range, supply voltage, and output sink-current requirement satisfy the application before substituting this part into an existing design.

This page consolidates the exact LM2903M/SL160222 ordering information, verified manufacturer and distributor references, pin assignments, drop-in alternatives, and practical application guidance to accelerate schematic review, PCB reuse, sourcing, and replacement planning.

Alternativas directas para LM2903M/SL160222 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LM2903M/SL160222 (mismo factor de forma y huella) — difiere en Package, Operating Temperature Range, Propagation Delay, Comparator Type, Output Type.

Texas Instruments
Package: 8-pin SOIC (D)
Operating Temperature Range: -40 °C to +125 °C
Propagation Delay: 1 µs
Texas Instruments
Operating Temperature Range: -40 C to +85 C
Propagation Delay: 1.5 microseconds
Comparator Type: Dual differential comparator
Texas Instruments
Package: SOIC (D), 8 pins
Operating Temperature Range: -40°C to 85°C
Propagation Delay: 1.5 us

LM2903M

✅ Sustitución directa
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 · 2 V to 36 V · Open-collector · Rail-to-rail · 1.5 microseconds · 1 mA · CMOS, DTL, ECL, MOS, TTL

Consulte el precio

Ver hoja de datos →

LM2903M/NOPB

✅ Sustitución directa
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 channels · 2 independent comparators · Open collector · 2 mV · 2 nA and 5 nA · 1.5 us · Up to 18 V

Consulte el precio

Ver hoja de datos →

LM2903BIDR

✅ Sustitución directa
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 channels · Open-collector · 36 V · 2 V · 0.37 mV · 3.5 nA · 200 µA per comparator

Consulte el precio

Ver hoja de datos →

LM2903BIDR

✅ Sustitución directa
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 channels · Open-collector · 36 V · 2 V · 0.37 mV · 3.5 nA · 200 µA per comparator

Consulte el precio

Ver hoja de datos →

LM2903M

✅ Sustitución directa
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 · 2 V to 36 V · Open-collector · Rail-to-rail · 1.5 microseconds · 1 mA · CMOS, DTL, ECL, MOS, TTL

Consulte el precio

Ver hoja de datos →

LM2903M/SL160222 Valores máximos y características eléctricas

Comparator Type Dual differential voltage comparator
Number of Channels 2
Architecture Two independent precision voltage comparators
Supply Configuration Single supply
Input Offset Voltage 2.0 mV maximum for two comparators
Tipo de salida Open-collector
Encapsulado 8-pin SOIC
Tipo de montaje Surface mount
Output Compatibility TTL, MOS, and CMOS compatible
Estado RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Configuración de pines de LM2903M/SL160222

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUT 1 — Open-collector output for comparator channel 1
Pin 2 IN 1- — Inverting input for comparator channel 1
Pin 3 IN 1+ — Non-inverting input for comparator channel 1
Pin 4 GND — Ground reference
Pin 5 IN 2+ — Non-inverting input for comparator channel 2
Pin 6 IN 2- — Inverting input for comparator channel 2
Pin 7 OUT 2 — Open-collector output for comparator channel 2
Pin 8 VCC — Positive power supply

Aplicaciones típicas

LM2903M/SL160222 es adecuado para 6 aplicacións: Industrial Sensor Threshold Detection, Battery Monitoring and Low-Voltage Alert, Motor-Control and Overcurrent Protection Logic, Window Comparator for Signal Qualification, Open-Collector Alarm and System Interlock, General-Purpose Logic Interface.

🏭

Industrial Sensor Threshold Detection

The LM2903M/SL160222 fits industrial sensor interfaces that require two independent decisions within one 8-pin SOIC package. One channel can compare a conditioned sensor voltage with an adjustable reference, while the second monitors a separate limit or fault signal. According to the Texas Instruments manufacturer datasheet, the family is designed for single-supply operation and can provide an input offset voltage as low as 2.0 mV maximum for the two-comparator configuration. Open-collector outputs suit active-low PLC or controller inputs when paired with suitable pull-up resistors. Place the part away from motor switching nodes, use a stable reference for the decision threshold, and verify the common-mode range across the complete sensor and supply operating range.

⚡

Battery Monitoring and Low-Voltage Alert

The LM2903M/SL160222 is suitable for battery-powered monitoring circuits that compare a divided battery voltage against a reference and generate an active-low alert. Its two independent comparator channels can supervise separate voltage thresholds without requiring two packages, while the documented single-supply architecture supports compact power systems. The Texas Instruments manufacturer datasheet describes the device as two independent precision voltage comparators with offset voltage as low as 2.0 mV maximum for the two-comparator configuration. Open-collector outputs allow a pull-up to the local logic rail, although the resistor can consume continuous current while the output is low. Select divider tolerances and a low-current reference to prevent threshold drift, then verify the full battery discharge range against the comparator input limits.

🔧

Motor-Control and Overcurrent Protection Logic

The LM2903M/SL160222 can implement hardware decision logic around a motor-control or power-conversion subsystem by comparing a current-sense signal with a trip reference. Two independent channels allow separate monitoring functions, such as a fast overcurrent channel and a slower thermal or supply-condition channel. The Texas Instruments manufacturer datasheet identifies open-collector outputs and single-supply operation as central family characteristics, allowing each comparator to drive a gate-driver fault input, relay, or status latch through suitable interface circuitry. Keep the sense path short and isolate it from high-current switching nodes to preserve threshold accuracy. Confirm output-current capacity, input recovery behavior, and supply limits under the worst operating condition before using the comparator as a protective element.

📺

Window Comparator for Signal Qualification

The LM2903M/SL160222 can implement a window-comparator arrangement by using its two independent channels to detect both an upper and a lower threshold. This is useful for validating a conditioned analog signal before passing it to an ADC, logic system, or actuator. The manufacturer datasheet specifies an offset voltage as low as 2.0 mV maximum for the two-comparator configuration, helping define the practical threshold separation when signal levels permit. Because the outputs are open-collector, their active-low states can be combined with pull-ups and logic gates to create an in-range indication. Keep both threshold networks close to the device, use matched reference impedances where threshold drift matters, and test the complete signal amplitude against both comparators for overlap and hysteresis behavior.

🚗

Open-Collector Alarm and System Interlock

The LM2903M/SL160222 fits alarm and interlock circuits where a fault condition must pull a shared line low. One channel can monitor a fault flag while the second verifies an enable, reset, or healthy-state signal. Open-collector outputs provide wired logic behavior when each output receives its own pull-up, and the two channels allow separate fault paths to remain electrically independent. According to the Texas Instruments LM2903 documentation, the outputs are compatible with TTL, MOS, and CMOS systems. Select the pull-up voltage for the receiving logic and calculate its maximum current from the output-low specification. For safety-related use, review redundancy, fail-safe polarity, response time, and applicable system requirements rather than relying on comparator qualification alone.

🔧

General-Purpose Logic Interface

The LM2903M/SL160222 can bridge a slowly changing analog indication to a digital control system by comparing the indication with a logic threshold. The open-collector output can operate an indicator, optocoupler input, relay driver, or controller enable after adding the required pull-up and any necessary transistor stage. The manufacturer datasheet confirms single-supply operation, two independent comparator sections, and TTL, MOS, and CMOS interface compatibility. This makes the device suitable for legacy equipment where a compact, discrete-channel alternative is preferable. Ensure the compared signal remains within the common-mode limits at every supply voltage, account for input offset in threshold design, and include hysteresis where chatter near the threshold could otherwise cause repeated transitions.

Where can I download the LM2903M/SL160222 datasheet PDF?
The LM2903M/SL160222 datasheet PDF is available through the linked manufacturer document mirror for the LM2903M and the Texas Instruments LM2903 product page. The document identifies the device as two independent precision voltage comparators designed for single-supply operation. It specifies an offset voltage as low as 2.0 mV maximum for the two-comparator configuration. Use the ordering-information section to confirm that the electrical variant and 8-pin SOIC package correspond to the intended LM2903M/SL160222 configuration.
What is the operating voltage of LM2903M/SL160222?
The LM2903M/SL160222 operates from a single power supply over a wide voltage range, according to the Texas Instruments LM2903 manufacturer datasheet. The exact minimum and maximum supply voltages are not stated in the retrieved product excerpts. Before applying the device, consult the electrical-characteristics and absolute-maximum-rating tables in the manufacturer datasheet. Also verify that the sensor or logic signal levels remain inside the channel's input common-mode range for the selected supply voltage.
What are the key specifications of LM2903M/SL160222 that engineers should know?
The LM2903M/SL160222 is a dual, independent differential comparator in an 8-pin SOIC package. Key documented characteristics include an input offset voltage as low as 2.0 mV maximum for two comparators, open-collector outputs, single-supply operation, and compatibility with TTL, MOS, and CMOS interfacing. According to the Texas Instruments manufacturer datasheet, two independent sections allow separate threshold comparisons within one package. Confirm supply limits, common-mode range, response time, and output-current limits from the electrical-characteristics table before final circuit design.
Where can I find the LM2903M/SL160222 pinout?
The LM2903M/SL160222 pinout is defined for the 8-pin SOIC package, with pins 1 and 7 serving as the two open-collector outputs, pins 2 and 6 as inverting inputs, pins 3 and 5 as non-inverting inputs, pin 4 as ground, and pin 8 as the positive supply. The Texas Instruments manufacturer datasheet pin-description table is the controlling reference for PCB assignments. Maintain the standard counter-clockwise numbering of the SOIC footprint and place pin 1 at the marked end of the package.
Is LM2903M/SL160222 the same as LM2903M?
LM2903M/SL160222 is an ordering designation associated with the Texas Instruments LM2903M dual comparator in the 8-pin SOIC configuration. The base LM2903M listing and the LM2903M/SL160222 listing refer to the same comparator family and package format, while the extended suffix can identify customer-specific packing or traceable ordering information. Confirm the reel configuration, order quantity, marking details, and lead time with the manufacturer before treating it as interchangeable with a generic LM2903M shipment.
What can replace LM2903M/SL160222?
The LM2903M/SL160222 can be replaced by a pin-compatible LM2903-family device that uses the same 8-pin SOIC footprint and satisfies the original supply, input-range, offset, output, and logic-interface requirements. Texas Instruments LM2903M/NOPB, LM2903BIDR, and LM2903B-family options are candidates within the manufacturer range, while the onsemi LM2903M appears in cross-reference listings. Each candidate still requires datasheet verification for ordering suffix, qualification status, temperature range, and production requirements.
What is the best onsemi equivalent for LM2903M/SL160222?
The onsemi LM2903M is the best-supported cross-brand candidate in the retrieved references because it is listed as an 8-SOIC open-collector dual comparator with the same LM2903M family designation. According to the Texas Instruments LM2903 documentation, the family is intended to support pin-for-pin replacement, but engineers must still compare supply voltage, common-mode range, offset voltage, output sink current, and operating temperature. Confirm the onsemi datasheet before committing the cross-brand substitution to production.
LM2903M/SL160222 vs LM2903BIDR - which is better for an industrial threshold detector?
LM2903BIDR is the stronger candidate when an explicitly pin-compatible 8-pin SOIC option is required and its temperature grade matches the industrial design. Texas Instruments describes the LM2903B as a drop-in replacement for the LM2903 family, while the LM2903M/SL160222 provides the same dual-comparator and open-collector architecture. Choose the original ordering designation when traceability or an exact approved configuration matters; choose LM2903BIDR after verifying supply range, common-mode limits, response time, and lifecycle requirements.
What is the difference between LM2903M/SL160222 and LM2903M/NOPB?
The principal documented difference is the ordering suffix rather than the comparator architecture. LM2903M/SL160222 is the customer-specific ordering designation, while LM2903M/NOPB is another 8-SOIC ordering option for the LM2903M family. Both identify a dual open-collector comparator. For a drop-in PCB decision, both use the 8-pin SOIC footprint, but procurement teams should confirm temperature grade, marking, tape-and-reel orientation, lot traceability, and approved-vendor status before substitution.
When should I choose LM2903M/SL160222 over another dual comparator?
Choose LM2903M/SL160222 when the design requires two independent open-collector comparison channels, a single-supply architecture, an 8-pin SOIC footprint, and a specific Texas Instruments ordering designation. It is particularly suitable for threshold sensing and active-low alert outputs where open-collector pull-ups are acceptable. Choose an upgraded comparator only when a required parameter, qualification grade, temperature rating, availability, or lifecycle condition is not met by this ordering configuration.
Is LM2903M/SL160222 suitable for battery-powered monitoring circuits?
Yes, LM2903M/SL160222 can fit battery-powered monitoring circuits when its supply and input ranges cover the battery operating region. The Texas Instruments manufacturer datasheet identifies the device for single-supply operation over a wide voltage range and documents two independent comparator sections. Because the exact minimum and maximum supply ratings are not included in the retrieved excerpts, verify the operating limits, quiescent current, and input common-mode range before deployment. An open-collector pull-up also creates a static current path when the output is low.
How much output current can LM2903M/SL160222 sink?
The LM2903M/SL160222 uses open-collector outputs, so its usable sink current depends on the pull-up supply, pull-up resistance, output-low voltage, and the manufacturer's output-current rating. The retrieved excerpts confirm the open-collector architecture but do not state the maximum sink current. Use the electrical-characteristics table in the Texas Instruments manufacturer datasheet and calculate the pull-up current with I = (VPU - VOL)/RPU. Do not substitute a logic-high drive arrangement that assumes push-pull output behavior.
How should open-collector outputs on LM2903M/SL160222 be connected?
Connect each LM2903M/SL160222 open-collector output to a pull-up resistor referenced to the logic supply used by the receiving circuit. The output transistor pulls the node toward ground when the comparison state requires a low output, while the resistor creates a logic-high state when the transistor is off. According to the Texas Instruments LM2903 family information, the outputs are compatible with TTL, MOS, and CMOS systems. Select the pull-up voltage and resistance to satisfy input thresholds, sink-current limits, rise-time requirements, and system power limits.
Where can I buy LM2903M/SL160222 and what is the lead time?
Use the Request a Quote form on this page to request LM2903M/SL160222 availability, current lead time, minimum order quantity, and the correct customer-order packing configuration. The retrieved distributor references cover the LM2903 family, but they do not provide a complete quantity-break table for the exact LM2903M/SL160222 suffix. The /SL160222 designation may carry customer-specific packing or traceable-ordering requirements, so request confirmation of manufacturer status, reel orientation, markings, and production quantity before scheduling the build.
Is LM2903M/SL160222 RoHS and REACH compliant?
The retrieved product excerpts do not explicitly state the RoHS or REACH status for LM2903M/SL160222, so compliance should be confirmed from the current Texas Instruments product page or manufacturer material declaration for the exact ordering code. Do not infer compliance solely from the family name or another LM2903 ordering suffix. The same check should cover lead-free construction, halogen status, and conflict-minerals reporting if your procurement or environmental documentation system requires those fields.
What lifecycle status applies to LM2903M/SL160222?
The Texas Instruments LM2903 product page remains available as an active family resource, and the LM2903M is listed for order through current distributor references. The exact LM2903M/SL160222 customer designation should nevertheless be confirmed with the manufacturer because specialized suffixes can have different packing or traceability conditions. Request the current lifecycle statement, orderable part number, qualification status, and lead time through the Request a Quote form on this page before committing to a long-term production schedule.

Datos de referencia de ingeniería para LM2903M/SL160222 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose LM2903M/SL160222 when the PCB requires two independent open-collector comparisons in an 8-pin SOIC and the exact customer-specific ordering designation provides traceability or approved packing. It is a natural fit for single-supply threshold detection, active-low alarms, window sensing, and two-channel industrial control logic. LM2903M or LM2903M/NOPB may be preferable when the standard ordering configuration satisfies procurement requirements. LM2903BIDR or LM2903B may be selected when their upgraded B-version electrical ratings are preferable after checking supply, common-mode, offset, response-time, and temperature limits. The onsemi LM2903M is a viable cross-brand candidate only after a complete datasheet comparison confirms pin behavior, output-current capability, qualification, lifecycle, and operating-temperature requirements. For every option, verify the pull-up design and confirm that the suffix, reel orientation, and manufacturer-approved configuration match the production BOM.

Comparación con alternativas

Parámetro Este producto LM2903M LM2903M/NOPB LM2903BIDR LM2903B LM2903M
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments onsemi
Comparator Channels 2 2 2 2 2 2
Ordering Configuration LM2903M/SL160222 customer-specific designation Base LM2903M designation NOPB ordering designation B-version, SOIC reel designation B-version family designation onsemi manufacturer designation

Diferenciadores clave

  • Two independent comparator channels in one 8-pin SOIC (frente a LM2901DRG4)
  • Documented low offset for dual-channel operation (frente a onsemi LM2903M)
  • Open-collector interface flexibility (frente a LM2901DRG4)

Notas de diseño

Route the inverting and non-inverting inputs as a compact, matched pair and keep them away from relay contacts, switching-regulator outputs, and high-current power traces. Place the supply bypass capacitor close to pin 8 and connect pin 4 to the quiet ground reference. Because the LM2903M/SL160222 uses open-collector outputs, place each pull-up resistor near the corresponding output or receiving logic input so that switching trace length and parasitic capacitance remain small.

Do not treat an open-collector output as a push-pull logic output. Each output requires a pull-up to the appropriate logic rail, and the resulting high level is set by that supply rather than by the comparator. Check the output-low voltage at the intended sink current, verify the logic-family input thresholds, and account for the continuous pull-up current while the output is low. A missing or incorrectly selected pull-up can prevent the downstream device from recognizing the valid high state.

Design threshold comparisons with realistic noise margin rather than relying only on the nominal reference voltage. The manufacturer datasheet documents an offset voltage as low as 2.0 mV maximum for the two-comparator configuration, but input offset alone does not define system accuracy. Reference tolerance, resistor tolerance, temperature drift, input noise, and propagation delay can all move the switching point. Add intentional hysteresis when the compared signal can cross the threshold slowly or exhibit noise near the decision boundary.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The retrieved LM2903 family references do not explicitly state compliance for the exact LM2903M/SL160222 ordering designation. Confirm current material declarations with Texas Instruments for the exact orderable code.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

lm2903m datasheet lm2903m nopb lm2903m datasheet pdf lm2903m pdf LM2903M/SL160222 datasheet LM2903M/SL160222 specifications LM2903M/SL160222 pinout LM2903M/SL160222 equivalent LM2903M/SL160222 replacement Texas Instruments LM2903M LM2903M 8-SOIC comparator LM2903M open collector output LM2903M battery voltage monitoring LM2903M price and stock

Componentes & términos relacionados

Texas Instruments LM2903M/SL160222 LM2903M LM2903M/NOPB LM2903BIDR LM2903B onsemi LM2903M dual differential comparator voltage comparator analog comparator analog integrated circuit semiconductor open-collector output single-supply operation input offset voltage common-mode voltage range TTL compatibility MOS compatibility CMOS compatibility 8-pin SOIC SOIC package family surface-mount package industrial sensor interface battery monitoring motor-control protection
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ