Texas Instruments

LM324APWRG4 - Quad General-Purpose Op Amp, 14-TSSOP | Texas Instruments

N.º de pieza: LM324APWRG4 ✓ Activo
±16 V (32 V max total supply) Vdss 0.8 mA typ, independent of supply voltage Id 14-pin TSSOP (PW), 0.8 mm pitch Package
MOQ: 1 |

LM324APWRG4 Descripción general

The Texas Instruments LM324APWRG4 is a quadruple general-purpose operational amplifier in a 14-pin TSSOP package, containing four independent, internally frequency-compensated amplifiers designed to run from a single supply or split supply over a wide voltage range up to ±16 V (32 V total). Each channel offers a typical input offset voltage of ±3 mV, a supply-current drain of 0.8 mA typ per amplifier that stays essentially independent of supply voltage, and 2 kV ESD protection.

An operational amplifier is a high-gain, differential-input, single-ended-output active device that drives its output toward the higher of its two inputs. The LM324 belongs to the quad general-purpose op-amp family, a direct descendant of the classic single LM741 architecture in which four amplifiers share one package. In the signal-chain hierarchy it sits between discrete transistor stages and precision instrumentation amplifiers: it is a voltage-feedback, internally compensated (unity-gain stable) amplifier aimed at cost-sensitive, high-volume analog signal conditioning.

Key differentiators of the LM324A grade are the tighter ±3 mV typical input offset voltage and the enhanced ESD robustness compared with earlier LM324 revisions. Because each amplifier is internally compensated, it behaves correctly at unity gain without external frequency-compensation networks, and the common-mode input range includes ground so the device can be used in single-supply sensing circuits whose signal swings to 0 V.

The A suffix denotes the improved-offset version, while the PWRG4 suffix denotes the 14-pin TSSOP, tape-and-reel, RoHS-green (lead-free) ordering code. Because the package is only 14 pins across and 0.8 mm pitch, four amplifiers fit into a footprint comparable to a single SOIC-14, which keeps quad-buffer, quad-instrumentation and multi-channel sensor-conditioning boards compact.

Typical applications include sensor signal conditioning, low-side current monitoring, DC motor and actuator driver stages, audio mixer sub-circuits, temperature-controller error amplifiers, and general instrumentation buffers. Four matched channels in one package also reduce board area, ground-bounce risk, and part-count on multi-channel analog boards.

When designing with the LM324APWRG4, remember that it is not a rail-to-rail input or output amplifier: the common-mode and output swing limits are set by the supply rails, so headroom of a few hundred millivolts must be reserved at the output. Decouple each supply pin locally, keep feedback loops short, and prefer the LM324A offset grade over the base LM324 when accuracy matters.

Alternativas directas para LM324APWRG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LM324APWRG4 (mismo factor de forma y huella) — difiere en Package, Amplifier Type, Supply Configuration, Input Offset Voltage, Number of Amplifiers.

Texas Instruments
Package: 14-pin TSSOP (PW)
Amplifier Type: General-purpose operational amplifier
Supply Configuration: Single or dual supply
Comparar con LM324APWRG4 →
Texas Instruments
Package: 14-pin TSSOP
Supply Configuration: Single or dual supply
Comparar con LM324APWRG4 →
Texas Instruments
Package: 14-TSSOP
Supply Configuration: Single supply or split supply
Comparar con LM324APWRG4 →
Texas Instruments
Amplifier Type: Quad general-purpose operational amplifier
Supply Configuration: Single supply or split supply
Comparar con LM324APWRG4 →

LM324APWR

✅ Sustitución directa
Texas Instruments
📦 TSSOP-14 (PW)
4 circuits · General-purpose operational amplifier · 30 V · 1.2 MHz · 3 mV · 0°C to 70°C · 14-pin TSSOP (PW) · 14 pins

Consulte el precio

Ver hoja de datos →

LM324PWRG4

✅ Sustitución directa
Texas Instruments
📦 TSSOP-14 (PW)
Quad general-purpose operational amplifier · 4 independent channels · 1.2 MHz · 3 V to 32 V total · ±16 V · Single supply or split supply · Yes · High-gain, internally compensated

Consulte el precio

Ver hoja de datos →

LM324PWRE4

✅ Sustitución directa
Texas Instruments
📦 TSSOP-14 (PW)
Quad general-purpose operational amplifier · 4 circuits · 4 independent amplifiers · 1.2 MHz · 1 V/us · Up to ±16 V (32 V total) · Single supply or split supply · Push-pull

Consulte el precio

Ver hoja de datos →

LM324KPWR

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Texas Instruments
📦 TSSOP-14 (PW)
4 circuits · Quad general-purpose operational amplifier · 30 V · 1.2 MHz · 2 kV · 14-pin TSSOP · 4.40 mm · Surface mount

Consulte el precio

Ver hoja de datos →

LM324APWR

✅ Sustitución directa
Texas Instruments
📦 TSSOP-14 (PW)
4 circuits · General-purpose operational amplifier · 30 V · 1.2 MHz · 3 mV · 0°C to 70°C · 14-pin TSSOP (PW) · 14 pins

Consulte el precio

Ver hoja de datos →

LM324APWRG4 Valores máximos y características eléctricas

Number of Amplifiers 4
Amplifier Type Quad general-purpose operational amplifier, unity-gain stable
Supply Voltage Range (Total) ±16 V (32 V max total supply)
Input Offset Voltage ±3 mV typ (LM324A grade)
Supply Current per Amplifier 0.8 mA typ, independent of supply voltage
ESD Protection 2 kV
Common-Mode Input Range Includes ground, allowing direct sensing at 0 V
Número de pines 14
Encapsulado 14-pin TSSOP (PW), 0.8 mm pitch
Tipo de montaje Surface Mount
Shipping Format Tape and Reel
Green / Lead-Free Status RoHS-compliant green (G4 suffix)
Estado RoHS Compliant
REACH Status Compliant
AEC-Q100 Qualification Not qualified (industrial/commercial general-purpose grade)

Configuración de pines de LM324APWRG4

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Pin 1 OUT1 — Amplifier 1 output
Pin 2 IN1- — Amplifier 1 inverting input
Pin 3 IN1+ — Amplifier 1 non-inverting input
Pin 4 V+ — Positive supply voltage
Pin 5 IN2+ — Amplifier 2 non-inverting input
Pin 6 IN2- — Amplifier 2 inverting input
Pin 7 OUT2 — Amplifier 2 output
Pin 8 OUT3 — Amplifier 3 output
Pin 9 IN3- — Amplifier 3 inverting input
Pin 10 IN3+ — Amplifier 3 non-inverting input
Pin 11 V- — Negative supply voltage (or ground in single-supply use)
Pin 12 IN4+ — Amplifier 4 non-inverting input
Pin 13 IN4- — Amplifier 4 inverting input
Pin 14 OUT4 — Amplifier 4 output

Aplicaciones típicas

LM324APWRG4 es adecuado para 6 aplicacións: Sensor Signal Conditioning, DC Motor and Actuator Driver Stages, Low-Side Current Monitoring, Industrial Audio and Mixer Sub-Circuits, Temperature Control and Thermostat Loops, General Instrumentation and Test Equipment.

🧩

Sensor Signal Conditioning

The LM324APWRG4 fits front-end conditioning for resistive, thermocouple and bridge sensors where a 0-5 V or 0-3.3 V sensor output must be scaled into a level the ADC can measure. Its common-mode input range includes ground, so millivolt-level signals riding on a 0 V reference are sensed directly without a mid-supply bias, and the 3 mV typical offset of the A grade sets the smallest signal the stage can resolve accurately. Four channels in one 14-pin TSSOP let a single board host the sensor amp, a reference buffer, an anti-alias filter and a housekeeping channel. Feedback resistors are kept to 0.1 percent for ratio accuracy, and supply decoupling is placed within a few millimetres of pins 4 and 11.

🏭

DC Motor and Actuator Driver Stages

In brushed DC motor and solenoid driver designs, the LM324APWRG4 supplies the error amplifier and transconductance stages that close the current-control loop around an H-bridge or discrete power stage. The quad package provides one amplifier for the current-sense reference, one for the sense-signal amplifier, one as the error amplifier and one for optional speed or position conditioning, reducing board area on space-constrained control boards. Because the output swing is limited by the supply rails and the part is not rail-to-rail, design with at least 1 V of headroom at 5 V or 12 V so the error amplifier can drive its full command range without clipping.

⚡

Low-Side Current Monitoring

The LM324APWRG4 is a standard choice for amplifying the millivolt output of a low-side shunt in battery, charger and power-supply designs. The shunt signal is referenced to ground, which falls inside the amplifier's common-mode range including ground, so no artificial bias is needed at the input, and the wide supply range allows the sense stage to sit anywhere from a 5 V auxiliary rail up to a 36 V bus. With the A grade's 3 mV typical offset, the practical shunt resolution is set by the shunt element rather than the amplifier. A 100 ohm gain network with a 1 percent ratio keeps gain error low, and input lead routing should be differential and away from switching nodes.

🎧

Industrial Audio and Mixer Sub-Circuits

For entry-level mixer, intercom and instrument-amplifier input stages, the LM324APWRG4 provides four amplifier channels that handle microphone pre-amplification, summing and output buffering in a single 14-pin TSSOP footprint. This consolidation shortens ground paths between stages and reduces the component count on analog audio boards, while the 0.8 mA typ quiescent current per amplifier keeps thermal and battery impact low. The device is not a low-noise part, so it suits general-purpose signal paths rather than high-fidelity audio fronts, and the output swing headroom to the negative rail must be respected when operating from a single 5 V rail.

🏠

Temperature Control and Thermostat Loops

The LM324APWRG4 appears in heater controllers, thermostat modules and fan-speed regulators as the error amplifier comparing a resistive sensor against a reference and driving an MOSFET or relay driver. Its wide supply range allows the loop to run from the same rail as the actuator, and the low, supply-independent supply-current drain suits battery-backed thermostats. The internally compensated architecture is unity-gain stable, so it can be used directly as a comparator-style element with a hysteresis network. Compensation capacitors should be sized from the datasheet gain-bandwidth guidance, and the output transistor base drive should be current-limited to protect the amplifier output stage.

🔧

General Instrumentation and Test Equipment

In bench instruments, measurement front ends and laboratory modules, the LM324APWRG4 is used for buffer, attenuator and active-filter stages that need four channels of general-purpose gain around a single supply. The 14-pin TSSOP outline lets a compact instrument board place four amplifiers in the space of one or two discrete packages, and the wide 32 V total supply rating tolerates the higher rails used in ±15 V style bench circuits. Note that the amplifier is not a precision part: for accuracy better than a few millivolts of error, choose a low-offset, low-noise amplifier, and for rail-to-rail battery operation use a modern low-voltage quad amplifier instead.

What is the LM324APWRG4 and what does it do?
The LM324APWRG4 is a quadruple general-purpose operational amplifier from Texas Instruments packaged in a 14-pin TSSOP. Each of the four channels is an independent, internally frequency-compensated (unity-gain stable) amplifier that operates from a single supply or split supply up to ±16 V (32 V total). The datasheet describes four independent high-gain, frequency-compensated operational amplifiers designed to work across a wide supply range, making this one of the most widely sourced analog building blocks in industrial and consumer electronics.
What is the supply voltage range of the LM324APWRG4?
The LM324APWRG4 operates across a total supply of up to 32 V, equivalently ±16 V as shown in the manufacturer ordering information. The LM324 family is specified for wide supply ranges covering both single-supply operation (up to about 18 V for the LM324 grades) and dual-supply operation (up to ±13 V for LM2902 variants), and the common-mode input range includes ground so the amplifier can be used with a single positive rail and signals that touch 0 V.
What is the input offset voltage of the LM324APWRG4?
The LM324APWRG4 is the LM324A grade, whose typical input offset voltage is ±3 mV, an improvement over the original LM324 grade. According to the Texas Instruments datasheet, the A version is characterized by low input offset voltage of 3 mV typ (with 2 mV typ on the BA version). The offset is the differential voltage that must be present between the inputs to produce zero output, and it directly sets the DC accuracy of amplifiers and comparators built with this part.
What is the pinout of the LM324APWRG4 in the 14-pin TSSOP package?
The 14-pin TSSOP LM324APWRG4 uses the standard quad-op-amp pinning: pin 1 OUT1, pin 2 IN1-, pin 3 IN1+, pin 4 V+, pin 5 IN2+, pin 6 IN2-, pin 7 OUT2, pin 8 OUT3, pin 9 IN3-, pin 10 IN3+, pin 11 V-, pin 12 IN4+, pin 13 IN4-, pin 14 OUT4. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, and note that V+ is pin 4 and V- is pin 11 in this 14-pin TSSOP outline.
Where can I download the LM324APWRG4 datasheet PDF?
The manufacturer datasheet for the LM324 family is published by Texas Instruments at https://www.ti.com/lit/ds/symlink/lm324.pdf and covers the LM324, LM324A, LM324B, LM2902 and related quad operational amplifiers including the LM324APWRG4 orderable part. For mirror copies of the same document, the LM324APWRG4 datasheet is also indexed on alldatasheet.com. When using any copy, verify the revision date and confirm that the ordering table lists the PW (14-pin TSSOP) package with the G4 green suffix.
What is the best drop-in replacement for the LM324APWRG4?
The closest drop-in replacements are the same-die Texas Instruments orderable codes LM324APWR, LM324PWRG4 and LM324PWR, all in the 14-pin TSSOP (PW) footprint with identical pin-out, and LM324KPWR for wider temperature-range industrial designs. Because the footprint, pin functions and supply ratings are unchanged, no PCB change is required; the trade-offs are input offset voltage grade (A versus non-A), temperature coverage and the green/RoHS marking suffix.
Is the LM324APWRG4 the same as the LM324PWR?
The LM324APWRG4 and LM324PWR are the same die in the same 14-pin TSSOP package, and the difference is in the ordering suffix rather than the circuit function. The A in LM324APWRG4 denotes the improved-offset LM324A grade with 3 mV typ offset, while the plain LM324PWR carries the original grade's higher typical offset, and the G4 suffix marks the RoHS-compliant green assembly. They are interchangeable at the pin level, and the LM324APWRG4 is the preferable choice for new designs needing tighter DC accuracy.
How much current does each LM324 amplifier channel consume?
Each LM324 amplifier channel draws about 0.8 mA typ from the supply, and the datasheet highlights that this supply-current drain is essentially independent of supply voltage. For the full quad in a 14-pin TSSOP that is roughly 3.2 mA typ total, which is a key advantage in battery and low-leakage sensing designs where supply drain must stay flat as the rail changes. Quiescent current is one of the main reasons the LM324 remains the default general-purpose amplifier for low-cost analog boards.
Can the LM324APWRG4 be used with a single 5 V supply?
Yes, the LM324APWRG4 works from a single positive supply because its common-mode input voltage range includes ground and the output can swing close to the negative rail. With a 5 V single supply the usable input range is roughly 0 V to about 3.5 V, and the output swings to within roughly 50 mV of ground, so inputs above the common-mode ceiling must be attenuated or level-shifted. This is the classic configuration for 0-3.3 V sensor and current-shunt conditioning.
What is the difference between LM324APWRG4 and LM324KPWR?
Both are 14-pin TSSOP quad general-purpose op amps with the same pin-out, but they target different temperature grades. The LM324APWRG4 is the commercial-grade LM324A part, while LM324KPWR is the extended-temperature variant intended for industrial environments around 0 to +85 °C. Both are pin-to-pin compatible, so a design that begins with LM324APWRG4 can move to LM324KPWR without a layout change when the temperature envelope widens.
Where can I buy the LM324APWRG4 and what is the price?
The LM324APWRG4 is a high-volume, generally stocked part, and the distributor listings for this exact orderable code include the 14-pin TSSOP variant from Texas Instruments. Rather than quoting figures that change daily, use the Request a Quote form on this page and the part's parameter and package data are published on the manufacturer product page. Requesting a quote through this page returns current stock, lead time and volume pricing for the 14-TSSOP tape-and-reel packing.
What is the lead time and stock status for the LM324APWRG4?
The LM324APWRG4 is a mature, actively manufactured Texas Instruments quad op amp, and its status in the distributor listings for the exact MPN includes in-stock inventory with fast delivery for the tape-and-reel packing option. Because availability moves with demand and allocation, request the current lead time and available quantity through the Request a Quote form on this page. For production planning, treat it as a standard, non-allocated logic device rather than a constrained supply item.
Is the LM324APWRG4 suitable for motor control and actuator driver circuits?
The LM324APWRG4 is well suited to the error-amplifier and transconductance stages of DC motor and actuator drivers, where four matched channels let one package host a reference buffer, a current-sense amplifier, an error amplifier and an output driver. Because it is not a rail-to-rail part, the output swing and input common-mode limits must stay inside the supply rails, so choose a supply headroom of at least 1 V above the maximum drive signal when using a 5 V or 12 V rail.
What are the key specifications of the LM324APWRG4 that engineers should know?
The LM324APWRG4 is a quadruple general-purpose operational amplifier in a 14-pin TSSOP with four independent internally compensated channels, a total supply range up to 32 V (±16 V), 3 mV typ input offset voltage on the A grade, 0.8 mA typ supply current per amplifier, a common-mode input range that includes ground, and 2 kV ESD protection. It ships as a RoHS-compliant green (G4) tape-and-reel part and remains an active product, making it the default choice for low-cost, high-volume analog signal conditioning.
What can replace the LM324APWRG4 in an existing design?
The LM324APWRG4 can be replaced directly by the LM324APWR, LM324PWRG4 or LM324PWR from Texas Instruments, all in the identical 14-pin TSSOP footprint with the same pin assignments, and by LM324KPWR when a wider industrial temperature grade is acceptable. No schematic or layout changes are required because supply pins, input pins and output pins all map one-to-one. Only offset voltage grade, temperature range and green-assembly marking differ between these options.
What is the best equivalent from another manufacturer for the LM324APWRG4?
Secondary-source equivalents of the LM324 family, such as KEC's LM324APWR, use the same 14-pin TSSOP pin-out and the same general-purpose 32 V quad-amplifier electrical class, so they are typically board-compatible substitutes. Because third-party clones are not published with identical offset-voltage and ESD test data, specify them only after checking the worst-case offset, supply-current and common-mode figures against your accuracy budget, and confirm the AEC-Q100 or industrial-temperature status your end product requires.

Datos de referencia de ingeniería para LM324APWRG4 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the LM324APWRG4 when you need four general-purpose amplifier channels in a compact 14-pin TSSOP with the improved 3 mV typical offset of the A grade, a common-mode input range that includes ground, and a RoHS-compliant green assembly. Pick LM324PWRG4 only when the extra offset accuracy is not needed and cost dominates. Choose LM324KPWR when the design must run to an extended industrial temperature envelope rather than the commercial range of the LM324A. If your application needs precision offset drift, low noise, rail-to-rail input or output swing, or a tighter supply-current figure, move to a modern quad amplifier such as the TS97x or MC34xx families rather than pushing the LM324 beyond its specification. For second-source flexibility, the KEC clone offers the same pin-out but requires lot qualification. In every case, confirm that the TSSOP-14 footprint, V+ on pin 4 and V- on pin 11 match your layout before releasing the design.

Comparación con alternativas

Parámetro Este producto LM324APWR LM324PWRG4 LM324PWR LM324KPWR LM324APWR
Package TSSOP-14 (PW) TSSOP-14 (PW) - same TSSOP-14 (PW) - same TSSOP-14 (PW) - same TSSOP-14 (PW) - same TSSOP-14 (PW) - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments KEC
Number of Amplifiers 4 4 4 4 4 4

Diferenciadores clave

  • Tighter input offset voltage than the base LM324 grade (frente a LM324PWRG4)
  • Four amplifiers in a compact 14-pin TSSOP footprint (frente a KEC LM324APWR)
  • Low, supply-independent quiescent current (frente a LM324KPWR)
  • RoHS-compliant green assembly with active product status (frente a LM324PWR)

Notas de diseño

Estimated: with a single 5 V rail, four channels at 0.8 mA typ each draw about 3.2 mA typ total, or roughly 16 mW of quiescent dissipation, so supply sizing is driven by the load currents at pins 1, 7, 8 and 14 rather than by bias current. Place a 100 nF ceramic decoupling capacitor as close as possible to pin 4 (V+) and a second 100 nF capacitor directly across pins 4 and 11, with a 1 uF to 10 uF bulk capacitor on the rail. Because output current is sourced from the supply pins, route output traces separately from the input network to limit coupling.

The LM324 is not rail-to-rail on either input or output. On a single 5 V supply the usable common-mode input range is roughly 0 V to 3.5 V and the output only swings to within about 50 mV of ground, so any signal or command exceeding those limits clips. Design the signal path so that the maximum expected input stays inside the common-mode window and add headroom when driving a load that needs a full 0 to 5 V swing. For true 0 V to 5 V output capability, select a rail-to-rail quad amplifier instead.

Keep each amplifier's feedback network (typically 1 kOhm to 100 kOhm resistors plus a capacitor) within a few millimetres of the output and inverting input pins, and route the non-inverting input away from the output trace and from the V+ pin. Place the ground return of shunt and current-sense inputs as a differential pair to avoid ground-drop errors. For adjacent-channel designs, avoid sharing a long ground path between channels A and D, since the four amplifiers are not internally isolated.

Estimated: because the amplifier is internally compensated for unity-gain stability, closed-loop noise gain above about 10 amplifies the offset and noise of the single-ended output stage, so high-gain applications should be checked for peaking at the datasheet gain-bandwidth product. Add a small isolation resistor (10 to 100 Ohm) between the amplifier output and the feedback tap when driving capacitive loads of more than about 100 pF to prevent oscillation. In switched-capacitor or rectifier applications, add a small anti-alias capacitor and verify the settling behaviour before the ADC sample window.

Información de cumplimiento

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Qualified
Libre de plomo
Yes
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The G4 suffix identifies a RoHS-compliant, lead-free green assembly of the Texas Instruments LM324A family; the REACH declaration is published in the same compliance data set for this orderable code. The part is a commercial/industrial general-purpose grade and is not AEC-Q100 qualified for automotive use.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LM324APWRG4 datasheet LM324APWRG4 datasheet pdf LM324APWRG4 pinout LM324APWRG4 equivalent LM324APWRG4 drop-in replacement LM324APWRG4 vs LM324PWR LM324APWRG4 price LM324APWRG4 stock Texas Instruments LM324APWRG4 LM324 quad op amp TSSOP-14 LM324APWRG4 application circuit LM324 input offset voltage 3 mV LM324APWRG4 footprint tssop14 quad general purpose op amp single supply 32V

Componentes & términos relacionados

Texas Instruments LM324APWRG4 LM324APWR LM324PWRG4 LM324PWR LM324KPWR KEC LM324A operational amplifier quad op amp general-purpose amplifier voltage-feedback amplifier unity-gain stable common-mode input range input offset voltage quiescent current single-supply operation split supply TSSOP-14 TSSOP package family surface mount SMD RoHS REACH AEC-Q100 ESD protection signal conditioning current-sense amplifier DC motor control
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ