MCP3426A0-E/SN - 16-Bit Dual-Channel ADC | Microchip
N.º de pieza: MCP3426A0-E/SN ✓ ActivoMCP3426A0-E/SN Descripción general
An ADC is a data-acquisition IC that converts continuously varying analog voltages into digital values for measurement, control, or display. The MCP3426 belongs to the delta-sigma ADC family within the broader data-converter and signal-processing hierarchy. Its differential architecture measures the voltage difference between two inputs rather than referencing a single node to ground, which helps reject common-mode noise when sensors and measurement circuitry share an analog environment.
The principal features are 16-bit conversion resolution, two differential input channels, a precision 2.048 V onboard reference, and a differential input range of plus or minus 2.048 V. These characteristics suit low-frequency measurements requiring stable readings rather than high-speed waveform capture. The I2C-compatible interface also reduces the number of signal lines needed when the converter shares a control bus with other microcontrollers or embedded systems.
The delta-sigma architecture incorporates noise shaping to move quantization noise away from the lower-frequency portion of the measurement bandwidth. The onboard reference establishes the converter's voltage scale, while differential inputs can support sensor bridges, current-shunt measurements, and other signals whose useful information is represented as the difference between two nodes. The device is identified as an automotive AEC-Q100 part in distributor technical listings, making the temperature-qualified option relevant to vehicle and other demanding industrial environments.
Typical uses include industrial process monitoring, environmental sensors, strain-gauge and bridge-based measurements, current sensing, laboratory instrumentation, and low-speed data acquisition. It is less appropriate for audio-band waveform sampling, motor-control feedback loops, or other applications that require conversions faster than the specified 15 SPS rate. Firmware must also allow sufficient settling time between requested conversions when sequential measurements are used.
PCB layout should keep the analog inputs short, isolate them from switching-node currents, and follow the pin-description table in the manufacturer datasheet when assigning tracks. The I2C pull-up resistors should be sized for the bus voltage and total capacitance rather than the logic voltage alone. Differential input routing with closely matched geometry improves rejection of externally coupled noise and helps preserve the converter's full measurement performance.
Alternativas directas para MCP3426A0-E/SN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MCP3426A0-E/SN (mismo factor de forma y huella) — difiere en Package, Resolution, Differential Input Range, Number of Input Channels, Operating Temperature Range.
MCP3426A1-E/SN
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →MCP3426A2-E/SN
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →MCP3426A3-E/SN
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MCP3426A4-E/SN
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →MCP3426A5-E/SN
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →MCP3426A0-E/SN Valores máximos y características eléctricas
| Resolución | 16 bit |
| Number of Input Channels | 2 channels |
| Input Architecture | Differential input |
| Conversion Technology | Delta-sigma |
| Conversion Rate | 15 samples per second |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | -2.048 V to +2.048 V |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Digital Interface | Two-wire I2C-compatible serial interface |
| Encapsulado | 8-pin SOIC |
| Rango de temperatura de funcionamiento | -40 degrees C to +125 degrees C |
| Automotive Qualification | AEC-Q100 |
| Estado RoHS | Compliant |
| Estado del ciclo de vida | Active |
| Shipping Package | Tube |
Guía de configuración de pines de MCP3426A0-E/SN tube
Configuración de pines para MCP3426A0-E/SN (encapsulado tube). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para MCP3426A0-E/SN.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MCP3426A0-E/SN es adecuado para 6 aplicacións: Industrial Process Measurement, Strain Gauge and Bridge Sensing, Current Shunt Monitoring, Environmental Monitoring, Test and Measurement Instrumentation, Automotive Sensor Interface.
Industrial Process Measurement
The MCP3426A0-E/SN fits slow industrial measurements such as pressure, temperature, level, and chemical sensor outputs. Its two differential channels reduce sensitivity to common-mode voltage, while 16-bit resolution provides useful numerical resolution over the 2.048 V internal reference scale. The converter can be placed directly behind a bridge or instrumentation amplifier and report measurements through I2C to a supervisory controller. The 15 SPS rate is appropriate for continuously updated process values but not transient waveforms. Differential input filtering, guarded routing, and a stable reference arrangement are critical because external noise and supply variation can otherwise dominate the achievable accuracy.
Recomendado
Strain Gauge and Bridge Sensing
The MCP3426A0-E/SN is well suited to resistive bridge sensors because each channel accepts differential inputs and the converter includes a 2.048 V precision reference. A bridge output can be amplified and filtered before digitization, allowing the ADC to resolve small differential signals around a common-mode level. Sixteen-bit resolution is useful when the measured quantity produces only a small fraction of the available input range. Because the conversion rate is 15 SPS, the device is best for static load, force, or displacement readings that change gradually. The front end should include input protection, defined filtering, and careful routing to minimize differential noise and excitation errors.
Recomendado
Current Shunt Monitoring
The MCP3426A0-E/SN can measure current indirectly by digitizing the differential voltage produced across a shunt resistor. Differential input handling is valuable in motor, power-supply, and energy-monitoring systems where the shunt voltage is small and may sit on a rapidly changing common-mode rail. The 16-bit converter can provide high numerical resolution for low-rate current measurements, and its two channels permit simultaneous or sequential monitoring of two rails. The analog input network must respect the common-mode and absolute maximum limits of the converter, even though the differential signal is small. Filtering and Kelvin-style connection of the shunt improve accuracy by reducing voltage drops from copper and solder resistance.
Recomendado
Environmental Monitoring
The MCP3426A0-E/SN supports environmental sensor acquisition where temperature, humidity, soil moisture, or gas sensors produce slowly changing analog signals. Its low-rate 15 SPS conversion capability is adequate for periodic telemetry, while two differential inputs can serve separate sensing elements. The onboard 2.048 V reference simplifies portable and industrial systems that lack a precision external reference, and the I2C-compatible interface allows connection to a low-power embedded controller. Designers should apply channel-specific filtering, protect exposed sensor inputs from electrostatic discharge, and isolate analog routing from display, wireless, and switching circuitry. Periodic offset and gain checks are advisable when long-term measurement stability is important.
Recomendado
Test and Measurement Instrumentation
The MCP3426A0-E/SN can serve as the conversion element in a low-speed laboratory or field instrument that must capture two low-level differential voltages. Its 16-bit resolution, integrated 2.048 V reference, and differential input architecture help minimize the number of external precision components. The 15 SPS sampling rate is appropriate for temperature probes, strain readings, and slowly varying electrical tests rather than oscilloscope-style acquisition. Measurement accuracy will still depend on low-noise reference behavior, input buffering where required, and shielding or filtering of sensitive leads. Firmware should collect enough samples for averaging and reject results outside physically plausible ranges before presenting them as final measurements.
Recomendado
Automotive Sensor Interface
The MCP3426A0-E/SN is identified as an automotive AEC-Q100 device and can support low-rate sensing in vehicle systems operating from -40 degrees C to +125 degrees C. Differential inputs are helpful for sensors whose outputs are small and referenced to a noisy electrical environment. The device can monitor pressure, position, temperature, or resistive sensing elements where changes occur slowly enough for a 15 SPS conversion rate. Automotive implementation requires careful transient protection, grounding strategy, and separation from high-current loads. The I2C-compatible interface simplifies connection to a body or chassis controller, but firmware should validate every conversion and manage faults so that an out-of-range or corrupted sensor reading is not treated as a valid measurement.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MCP3426A0-E/SN — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MCP3426A1-E/SN | MCP3426A2-E/SN | MCP3426A3-E/SN | MCP3426A4-E/SN | MCP3426A5-E/SN |
|---|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Input Channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels |
| Conversion Technology | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Digital Interface | Two-wire I2C-compatible | Two-wire I2C-compatible | Two-wire I2C-compatible | Two-wire I2C-compatible | Two-wire I2C-compatible | Two-wire I2C-compatible |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Gain Configuration | A0 configuration | A1 configuration | A2 configuration | A3 configuration | A4 configuration | A5 configuration |
Diferenciadores clave
- Two-channel differential conversion in a compact 8-pin SOIC (frente a MCP3426A0-E/MC)
- Integrated precision reference reduces external analog complexity (frente a MCP3426A1-E/SN)
- Different gain options preserve the same physical footprint (frente a MCP3426A2-E/SN)
- Low-rate precision conversion avoids unnecessary high-speed conversion overhead (frente a MCP3426A3-E/SN)
Notas de diseño
Route each differential input pair as a tightly coupled pair and keep it away from switching nodes, high-current return paths, and display or digital timing signals. Use the manufacturer pin-description table to connect the input polarity consistently. A solid analog ground plane and short reference paths help prevent common-mode activity on the inputs from converting into differential error. Avoid long exposed copper that can increase leakage sensitivity on high-impedance sensor nodes.
The MCP3426A0-E/SN is a low-rate converter, but its input network still determines whether the 16-bit resolution is useful. Place input filtering close to the device, use low-value resistors with appropriate voltage ratings, and include differential or common-mode protection where external cables can introduce transients. Check capacitor tolerances and leakage because they can create offset errors at the input. Validate the filter cutoff against the 15 SPS conversion rate rather than filtering unnecessarily close to DC.
Do not treat every same-family MCP3426 gain option as an automatic substitution. Changing from A0 to another gain suffix can alter the usable input range and the distribution of resolution across the signal. Also distinguish MCP3426A0-E/SN from MCP3426A0-E/MC: the latter uses an 8-DFN package and is not a drop-in replacement for the SOIC footprint. Verify the exact suffix, package, gain table, and pin assignments before releasing a PCB or production BOM.
Decouple the 2.7 V to 5.5 V supply with local high-frequency and bulk capacitance placed close to the device. The reference and analog conversion circuitry depend on a quiet supply, so isolate the analog section from noisy switching nodes and route converter current away from sensitive input returns. Check the supply ramp and startup behavior against the device's power-on requirements. I2C pull-ups should connect to the actual bus voltage and remain switched or controlled only if the system handles partial-power states correctly.
Información de cumplimiento
RoHS compliance and automotive AEC-Q100 qualification are identified in distributor technical listings. Other compliance attributes are not stated in the verified product information.