Microchip Technology

MCP3426A0-E/SN - 16-Bit Dual-Channel ADC | Microchip

MPN: MCP3426A0-E/SN ✓ Aktif
2.048 V Vdss 8-pin SOIC Package
MOQ: 1 |

MCP3426A0-E/SN Ringkasan

The Microchip Technology MCP3426A0-E/SN is a 16-bit, two-channel, delta-sigma analog-to-digital converter with differential inputs, a 2.048 V internal precision reference, and a 15 SPS conversion rate, packaged in an 8-pin SOIC. It operates from a single 2.7 V to 5.5 V supply and communicates through a two-wire I2C-compatible serial interface.

An ADC is a data-acquisition IC that converts continuously varying analog voltages into digital values for measurement, control, or display. The MCP3426 belongs to the delta-sigma ADC family within the broader data-converter and signal-processing hierarchy. Its differential architecture measures the voltage difference between two inputs rather than referencing a single node to ground, which helps reject common-mode noise when sensors and measurement circuitry share an analog environment.

The principal features are 16-bit conversion resolution, two differential input channels, a precision 2.048 V onboard reference, and a differential input range of plus or minus 2.048 V. These characteristics suit low-frequency measurements requiring stable readings rather than high-speed waveform capture. The I2C-compatible interface also reduces the number of signal lines needed when the converter shares a control bus with other microcontrollers or embedded systems.

The delta-sigma architecture incorporates noise shaping to move quantization noise away from the lower-frequency portion of the measurement bandwidth. The onboard reference establishes the converter's voltage scale, while differential inputs can support sensor bridges, current-shunt measurements, and other signals whose useful information is represented as the difference between two nodes. The device is identified as an automotive AEC-Q100 part in distributor technical listings, making the temperature-qualified option relevant to vehicle and other demanding industrial environments.

Typical uses include industrial process monitoring, environmental sensors, strain-gauge and bridge-based measurements, current sensing, laboratory instrumentation, and low-speed data acquisition. It is less appropriate for audio-band waveform sampling, motor-control feedback loops, or other applications that require conversions faster than the specified 15 SPS rate. Firmware must also allow sufficient settling time between requested conversions when sequential measurements are used.

PCB layout should keep the analog inputs short, isolate them from switching-node currents, and follow the pin-description table in the manufacturer datasheet when assigning tracks. The I2C pull-up resistors should be sized for the bus voltage and total capacitance rather than the logic voltage alone. Differential input routing with closely matched geometry improves rejection of externally coupled noise and helps preserve the converter's full measurement performance.

Alternatif penggantian untuk MCP3426A0-E/SN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MCP3426A0-E/SN (sama faktor bentuk dan footprint) — berbeda di dalam Package, Resolution, Differential Input Range, Number of Input Channels, Operating Temperature Range.

Microchip Technology
Package: 8-pin SOIC (SN), 3.90 mm body width
Resolution: 16 bits
Number of Input Channels: 2 (differential)
Microchip Technology
Package: 8-pin SOIC, 0.154 in (3.90 mm) wide
Resolution: Up to 16 bits
Differential Input Range: ±2.048 V differential
Microchip Technology
Package: 8-pin SOIC, 3.90 mm body width
Resolution: Up to 16 bits
Differential Input Range: ±2.048 V
Microchip Technology
Differential Input Range: ±2.048 V
Operating Temperature Range: -40 °C to +125 °C
Microchip Technology
Package: 8-SOIC, 3.90 mm width
Differential Input Range: ±2.048 V
Operating Temperature Range: -40 °C to +125 °C

MCP3426A1-E/SN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 SOIC-8
Delta-sigma ADC · Up to 16 bits · 2 · Differential · 15 samples/s · 2.048 V · ±2.048 V differential · 2.7 V to 5.5 V

Kontak untuk harga

Lihat Datasheet →

MCP3426A2-E/SN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 SOIC-8
Up to 16 bits · 2 channels · Differential inputs · 16-bit delta-sigma ADC · 15 SPS · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

Kontak untuk harga

Lihat Datasheet →

MCP3426A3-E/SN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 SOIC-8
Gain configuration differs from A0 while the two-channel, 16-bit delta-sigma core and 8-pin SOIC footprint remain unchanged; exact gain ratio requires datasheet confirmation.

📋 Alternatif referensi (tidak dalam katalog)

MCP3426A4-E/SN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 SOIC-8
Sigma-delta · 16 bit · 2 channels · 240 samples/s · 15 samples/s · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

Kontak untuk harga

Lihat Datasheet →

MCP3426A5-E/SN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 SOIC-8
Sigma-delta ADC · 16 bit · 2 channels · 1 ADC · Differential · 15 SPS · 2.048 V · ±2.048 V

Kontak untuk harga

Lihat Datasheet →

MCP3426A0-E/SN Rating Maksimal & Karakteristik Listrik

Resolusi 16 bit
Number of Input Channels 2 channels
Input Architecture Differential input
Conversion Technology Delta-sigma
Conversion Rate 15 samples per second
Internal Reference Voltage 2.048 V
Differential Input Range -2.048 V to +2.048 V
Supply Voltage Range 2.7 V to 5.5 V
Digital Interface Two-wire I2C-compatible serial interface
Paket 8-pin SOIC
Rentang Suhu Kerja -40 degrees C to +125 degrees C
Automotive Qualification AEC-Q100
Status RoHS Compliant
Status Lingkungan Hidup Active
Shipping Package Tube

MCP3426A0-E/SN tube Diamant Konfigurasi Panduan

Konfigurasi pin untuk MCP3426A0-E/SN (tube pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai tube untuk MCP3426A0-E/SN

Tidak ada data diatribut pin yang tersedia untuk MCP3426A0-E/SN.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MCP3426A0-E/SN cocok untuk 6 aplikasis: Industrial Process Measurement, Strain Gauge and Bridge Sensing, Current Shunt Monitoring, Environmental Monitoring, Test and Measurement Instrumentation, Automotive Sensor Interface.

🏭

Industrial Process Measurement

The MCP3426A0-E/SN fits slow industrial measurements such as pressure, temperature, level, and chemical sensor outputs. Its two differential channels reduce sensitivity to common-mode voltage, while 16-bit resolution provides useful numerical resolution over the 2.048 V internal reference scale. The converter can be placed directly behind a bridge or instrumentation amplifier and report measurements through I2C to a supervisory controller. The 15 SPS rate is appropriate for continuously updated process values but not transient waveforms. Differential input filtering, guarded routing, and a stable reference arrangement are critical because external noise and supply variation can otherwise dominate the achievable accuracy.

🏭

Strain Gauge and Bridge Sensing

The MCP3426A0-E/SN is well suited to resistive bridge sensors because each channel accepts differential inputs and the converter includes a 2.048 V precision reference. A bridge output can be amplified and filtered before digitization, allowing the ADC to resolve small differential signals around a common-mode level. Sixteen-bit resolution is useful when the measured quantity produces only a small fraction of the available input range. Because the conversion rate is 15 SPS, the device is best for static load, force, or displacement readings that change gradually. The front end should include input protection, defined filtering, and careful routing to minimize differential noise and excitation errors.

⚡

Current Shunt Monitoring

The MCP3426A0-E/SN can measure current indirectly by digitizing the differential voltage produced across a shunt resistor. Differential input handling is valuable in motor, power-supply, and energy-monitoring systems where the shunt voltage is small and may sit on a rapidly changing common-mode rail. The 16-bit converter can provide high numerical resolution for low-rate current measurements, and its two channels permit simultaneous or sequential monitoring of two rails. The analog input network must respect the common-mode and absolute maximum limits of the converter, even though the differential signal is small. Filtering and Kelvin-style connection of the shunt improve accuracy by reducing voltage drops from copper and solder resistance.

🧩

Environmental Monitoring

The MCP3426A0-E/SN supports environmental sensor acquisition where temperature, humidity, soil moisture, or gas sensors produce slowly changing analog signals. Its low-rate 15 SPS conversion capability is adequate for periodic telemetry, while two differential inputs can serve separate sensing elements. The onboard 2.048 V reference simplifies portable and industrial systems that lack a precision external reference, and the I2C-compatible interface allows connection to a low-power embedded controller. Designers should apply channel-specific filtering, protect exposed sensor inputs from electrostatic discharge, and isolate analog routing from display, wireless, and switching circuitry. Periodic offset and gain checks are advisable when long-term measurement stability is important.

🔧

Test and Measurement Instrumentation

The MCP3426A0-E/SN can serve as the conversion element in a low-speed laboratory or field instrument that must capture two low-level differential voltages. Its 16-bit resolution, integrated 2.048 V reference, and differential input architecture help minimize the number of external precision components. The 15 SPS sampling rate is appropriate for temperature probes, strain readings, and slowly varying electrical tests rather than oscilloscope-style acquisition. Measurement accuracy will still depend on low-noise reference behavior, input buffering where required, and shielding or filtering of sensitive leads. Firmware should collect enough samples for averaging and reject results outside physically plausible ranges before presenting them as final measurements.

🚗

Automotive Sensor Interface

The MCP3426A0-E/SN is identified as an automotive AEC-Q100 device and can support low-rate sensing in vehicle systems operating from -40 degrees C to +125 degrees C. Differential inputs are helpful for sensors whose outputs are small and referenced to a noisy electrical environment. The device can monitor pressure, position, temperature, or resistive sensing elements where changes occur slowly enough for a 15 SPS conversion rate. Automotive implementation requires careful transient protection, grounding strategy, and separation from high-current loads. The I2C-compatible interface simplifies connection to a body or chassis controller, but firmware should validate every conversion and manage faults so that an out-of-range or corrupted sensor reading is not treated as a valid measurement.

Ringkasan Produk Direkomendasikan

MCP3426A1-E/MC Microchip Technology Digunakan di dalam: Industrial Process Measurement, Environmental Monitoring MCP3426A0-E/MC Microchip Technology Digunakan di dalam: Industrial Process Measurement, Environmental Monitoring MCP3426A2-E/MC Alternate gain configuration for bridge-signal range evaluation Digunakan di dalam: Strain Gauge and Bridge Sensing, Test and Measurement Instrumentation MCP3426A3-E/MC Alternate MCP3426 gain and package option Digunakan di dalam: Strain Gauge and Bridge Sensing, Test and Measurement Instrumentation MCP3426A4-E/MC Microchip Technology Digunakan di dalam: Current Shunt Monitoring, Automotive Sensor Interface MCP3426A5-E/MC Microchip Technology Digunakan di dalam: Current Shunt Monitoring, Automotive Sensor Interface
What is the MCP3426A0-E/SN?
The MCP3426A0-E/SN is a 16-bit, two-channel delta-sigma analog-to-digital converter with differential inputs and an I2C-compatible interface. According to the Microchip Technology MCP3426/7/8 Data Sheet 22226a, it includes a precision 2.048 V onboard reference, supports a differential range of plus or minus 2.048 V, and operates from a single 2.7 V to 5.5 V supply. It is intended for precision, low-speed measurement rather than high-speed waveform acquisition.
What are the key specifications of MCP3426A0-E/SN that engineers should know?
The MCP3426A0-E/SN combines 16-bit resolution, two differential input channels, a 15 samples-per-second conversion rate, and a 2.048 V internal reference. According to Microchip Technology documentation, its differential input range is plus or minus 2.048 V and its supply range is 2.7 V to 5.5 V. The converter uses a two-wire I2C-compatible interface and is offered in an 8-pin SOIC package rated for operation from -40 degrees C to +125 degrees C.
Where can I download the MCP3426A0-E/SN datasheet PDF?
The official MCP3426A0-E/SN datasheet PDF is available from Microchip Technology through the MCP3426/7/8 Data Sheet 22226a. The document covers the MCP3426 family's electrical characteristics, conversion behavior, reference implementation, digital interface, and package information. Use the manufacturer pin-description table and application guidance when assigning the eight SOIC pins and planning the analog input network.
Where can I find the MCP3426A0-E/SN pinout?
The MCP3426A0-E/SN pinout is defined by the manufacturer MCP3426/7/8 Data Sheet 22226a and its SOIC pin-description table. The device uses eight pins for power, ground, the two differential analog channels, and the two-wire digital interface. Because the verified product listings do not reproduce the complete pin table, use the manufacturer document directly rather than relying on a generic SOIC drawing when routing PCB traces.
What is the sampling rate of the MCP3426A0-E/SN?
The specified conversion rate for the MCP3426A0-E/SN is 15 samples per second. The Microchip Technology MCP3426/7/8 Data Sheet 22226a describes the device as a low-noise, high-accuracy delta-sigma converter family for measurement applications. This rate makes it suitable for temperature, pressure, strain, and slowly changing process signals, but not for capturing high-frequency waveforms or implementing a fast control loop.
What differential input voltage range does MCP3426A0-E/SN support?
The MCP3426A0-E/SN supports a differential input range of plus or minus 2.048 V around its precision 2.048 V onboard reference. According to the Microchip Technology MCP3426/7/8 Data Sheet 22226a, differential operation measures the voltage difference between each input pair. This is useful for bridge sensors and shunt amplifiers, but input signals must remain within the converter's absolute maximum ratings.
Where can I buy MCP3426A0-E/SN online?
The MCP3426A0-E/SN can be requested through the Request a Quote form on this page. The exact order quantity, current availability, and lead time should be confirmed when the quote is prepared. The manufacturer product page also provides purchasing information for this exact orderable MPN, which helps prevent confusion with the alternate 8-DFN package suffix MCP3426A0-E/MC.
What is the price of MCP3426A0-E/SN?
Current pricing for the MCP3426A0-E/SN is presented through the Request a Quote form on this page because the listing does not provide a qualifying quantity-break price table. The quote can be tied to the exact MCP3426A0-E/SN suffix, 8-pin SOIC package, and tube shipping format. This avoids conflating the target ordering code with the MCP3426A0-E/MC version supplied in an 8-DFN package.
What is the lead time for MCP3426A0-E/SN?
The current lead time and available quantity should be confirmed through the Request a Quote form on this page. Microchip's product listing describes the MCP3426A0-E/SN as active and historically shows a factory lead time of approximately 18 weeks for a partial tube, but that scheduling information can change. Use the quote response for a current allocation rather than relying on a historical shipment estimate.
Is MCP3426A0-E/SN in stock?
Current inventory for the MCP3426A0-E/SN should be confirmed through the Request a Quote form on this page. The manufacturer product listing identifies the exact MPN as in stock and active at the time of its listing, while also describing a factory lead time for additional material. Request the quantity and tube packaging required for your production schedule to obtain the most current availability commitment.
When should I choose MCP3426A0-E/SN over another dual-channel ADC?
Choose the MCP3426A0-E/SN when a design needs two differential inputs, 16-bit resolution, an integrated 2.048 V reference, and I2C communication at a measured rate of 15 samples per second. It is especially useful for bridge, shunt, and slowly varying industrial sensor signals. Select a faster converter instead when the application must sample waveforms, capture transients, or close a high-bandwidth control loop.
MCP3426A0-E/SN vs MCP3426A1-E/SN: which is better for gain selection?
The MCP3426A0-E/SN is the baseline gain configuration, while the MCP3426A1-E/SN changes the converter's gain-related operating point without changing the family architecture or 8-pin SOIC format. According to the Microchip Technology MCP3426/7/8 Data Sheet 22226a, the family supports multiple gain configurations. Confirm the exact gain, full-scale input range, and calibration requirements for your sensor before choosing between the two orderable MPNs.
What is the best drop-in replacement for MCP3426A0-E/SN?
The closest same-footprint replacements are the MCP3426A1-E/SN through MCP3426A5-E/SN, all of which use the same 8-pin SOIC family format but provide different gain configurations. They should be selected only after confirming that the changed gain still fits the sensor's voltage range and measurement resolution. No verified cross-brand, pin-to-pin-equivalent alternative was identified, so changing manufacturers is not recommended without a complete electrical and pin-function review.
Can MCP3426A1-E/SN replace MCP3426A0-E/SN on the same PCB?
The MCP3426A1-E/SN can replace the MCP3426A0-E/SN only when its different gain configuration preserves the required measurement range and system accuracy. Both devices are members of the MCP3426 family in the 8-pin SOIC format, but a gain change can alter the effective input range, resolution distribution, and analog front-end requirements. Confirm the relevant gain table and application circuit in the manufacturer data sheet before updating the BOM.
What is the best Microchip equivalent for MCP3426A0-E/SN?
The strongest same-manufacturer alternatives are MCP3426A1-E/SN, MCP3426A2-E/SN, MCP3426A3-E/SN, MCP3426A4-E/SN, and MCP3426A5-E/SN because they retain the MCP3426 family's 16-bit delta-sigma architecture and 8-pin SOIC format. Each alternative changes the gain configuration, so the correct choice depends on the analog signal range rather than package fit alone. Review the gain and full-scale specifications before designating a replacement.

Data referensi engineering untuk MCP3426A0-E/SN — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MCP3426A0-E/SN for two-channel, 16-bit differential measurements when the sensor output fits the baseline A0 gain configuration and a 15 SPS conversion rate is sufficient. Its integrated 2.048 V reference, I2C-compatible interface, and 8-pin SOIC package simplify low-speed industrial, environmental, bridge, and shunt measurements. The MCP3426A1-E/SN through MCP3426A5-E/SN are preferable when their corresponding gain configuration better matches the analog signal range while retaining the same package and converter family. Do not use MCP3426A0-E/MC as a drop-in substitute because it uses an 8-DFN package. For waveform capture, high-speed motor feedback, or signals exceeding the electrical limits, choose a faster and appropriately rated ADC instead.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MCP3426A1-E/SN MCP3426A2-E/SN MCP3426A3-E/SN MCP3426A4-E/SN MCP3426A5-E/SN
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Resolution 16 bit 16 bit 16 bit 16 bit 16 bit 16 bit
Input Channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels
Conversion Technology Delta-sigma Delta-sigma Delta-sigma Delta-sigma Delta-sigma Delta-sigma
Internal Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Digital Interface Two-wire I2C-compatible Two-wire I2C-compatible Two-wire I2C-compatible Two-wire I2C-compatible Two-wire I2C-compatible Two-wire I2C-compatible
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Gain Configuration A0 configuration A1 configuration A2 configuration A3 configuration A4 configuration A5 configuration

Diferensiator Kunci

  • Two-channel differential conversion in a compact 8-pin SOIC (vsMCP3426A0-E/MC)
  • Integrated precision reference reduces external analog complexity (vsMCP3426A1-E/SN)
  • Different gain options preserve the same physical footprint (vsMCP3426A2-E/SN)
  • Low-rate precision conversion avoids unnecessary high-speed conversion overhead (vsMCP3426A3-E/SN)

Catatan Desain

Route each differential input pair as a tightly coupled pair and keep it away from switching nodes, high-current return paths, and display or digital timing signals. Use the manufacturer pin-description table to connect the input polarity consistently. A solid analog ground plane and short reference paths help prevent common-mode activity on the inputs from converting into differential error. Avoid long exposed copper that can increase leakage sensitivity on high-impedance sensor nodes.

The MCP3426A0-E/SN is a low-rate converter, but its input network still determines whether the 16-bit resolution is useful. Place input filtering close to the device, use low-value resistors with appropriate voltage ratings, and include differential or common-mode protection where external cables can introduce transients. Check capacitor tolerances and leakage because they can create offset errors at the input. Validate the filter cutoff against the 15 SPS conversion rate rather than filtering unnecessarily close to DC.

Do not treat every same-family MCP3426 gain option as an automatic substitution. Changing from A0 to another gain suffix can alter the usable input range and the distribution of resolution across the signal. Also distinguish MCP3426A0-E/SN from MCP3426A0-E/MC: the latter uses an 8-DFN package and is not a drop-in replacement for the SOIC footprint. Verify the exact suffix, package, gain table, and pin assignments before releasing a PCB or production BOM.

Decouple the 2.7 V to 5.5 V supply with local high-frequency and bulk capacitance placed close to the device. The reference and analog conversion circuitry depend on a quiet supply, so isolate the analog section from noisy switching nodes and route converter current away from sensitive input returns. Check the supply ramp and startup behavior against the device's power-on requirements. I2C pull-ups should connect to the actual bus voltage and remain switched or controlled only if the system handles partial-power states correctly.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

RoHS compliance and automotive AEC-Q100 qualification are identified in distributor technical listings. Other compliance attributes are not stated in the verified product information.

Data disahkan pada: 2026-11-15 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

MCP3426A0-E/SN MCP3426A0-E/SN datasheet MCP3426A0-E/SN datasheet pdf MCP3426A0-E/SN pinout MCP3426A0-E/SN specifications MCP3426A0-E/SN equivalent MCP3426A0-E/SN replacement MCP3426A0-E/SN cross reference MCP3426A0-E/SN vs MCP3426A1-E/SN MCP3426A0-E/SN price MCP3426A0-E/SN stock Microchip MCP3426A0-E/SN MCP3426 8-SOIC differential ADC MCP3426 bridge sensor ADC MCP3426 current shunt measurement

Komponen dan Istilah Terkait

Microchip Technology MCP3426A0-E/SN MCP3426A1-E/SN MCP3426A2-E/SN MCP3426A3-E/SN MCP3426A4-E/SN MCP3426A5-E/SN MCP3426 MCP3426/7/8 family ADC analog-to-digital converter delta-sigma ADC data converter signal-processing IC differential input instrumentation amplifier bridge sensor current shunt I2C I2C-compatible serial interface 2.048 V precision reference 16-bit resolution 15 samples per second SOIC-8 SOIC package family surface-mount package AEC-Q100 RoHS
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ