PIC24F08KM202T-I/ML - 16-bit 32MHz MCU, 8KB Flash, 28-QFN | Microchip
N.º de pieza: PIC24F08KM202T-I/ML ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $3.2 | $3,20 |
| 10 | $2.88 | $28,80 |
| 100 | $2.45 | $245,00 |
| 500 | $2.18 | $1.090,00 |
| 1.000 | $1.95 | $1.950,00 |
PIC24F08KM202T-I/ML Descripción general
A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, peripherals, and I/O. The 16-bit PIC24F architecture sits between 8-bit PIC MCUs and 32-bit PIC32 devices in Microchip's portfolio, offering higher code density, wider data paths, and DSP-like instructions while retaining the PIC ecosystem's low power characteristics. The PIC24F KM family in particular targets mixed-signal embedded designs that need on-chip analog functions alongside digital control, reducing external component count and BOM cost.
Key features: 8 KB self-programmable Flash, 2 KB SRAM, 512 B EEPROM, 32 MHz operation delivering 16 MIPS, 19 channels of 12-bit ADC, 2 channels of 8-bit DAC, integrated op amps, comparators, Configurable Logic Cell (CLC), MCCP/SCCP timers, and peripheral trigger generator. XLP technology yields nanoWatt sleep currents suited for battery-powered and energy-harvesting applications. The 28-QFN (6x6 mm) footprint keeps the BOM footprint small.
Architecturally, the PIC24F uses a 16-bit modified Harvard CPU with single-cycle 16x16 MAC, supporting C-compiled code with predictable interrupt latency. The peripheral trigger generator and CLC allow hardware-based signal routing without CPU intervention, freeing the core for application logic and reducing firmware complexity.
Typical applications: portable medical and consumer devices, IoT sensor nodes, low-power wireless remote controls, battery monitoring and management, e-metering, and small-format industrial sensors. The combination of on-chip analog (12-bit ADC, 8-bit DAC, op amps) and flexible digital peripherals (CLC, MCCP/SCCP) makes the device a good fit for sensor conditioning and closed-loop regulation loops in compact designs.
Design consideration: at 32 MHz with 3.3 V supply the core current is in the single-digit mA range; sleep currents in the nanoWatt regime enable duty-cycled battery operation. Plan the ADC acquisition timing and reference decoupling around the integrated analog peripherals.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternativas directas para PIC24F08KM202T-I/ML — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC24F08KM202T-I/ML (mismo factor de forma y huella) — difiere en ADC, Comparators, Operating Temperature, Package, Program Memory (Flash).
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
PIC24F08KM102T-I/ML
✅ Sustitución directa✓ En stock
$1.92 / unidad
Ver hoja de datos →PIC24F08KM202-I/ML
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PIC24F08KM102-I/SO
✅ Sustitución directa✓ En stock
$1.55 / unidad
Ver hoja de datos →PIC24F08KM202T-I/ML Valores máximos y características eléctricas
| Core Architecture | 16-bit PIC24F |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Program Memory (Flash) | 8 KB (2.75K x 24) |
| Data Memory (SRAM) | 2 KB |
| EEPROM | 512 bytes |
| Tensión de alimentación | 1.8 V to 5.5 V |
| Temperatura de funcionamiento | -40 °C to +85 °C (Industrial) |
| Encapsulado | 28-QFN (6x6 mm) |
| ADC | 12-bit, up to 19 channels |
| DAC | 8-bit, 2 channels |
| Operational Amplifiers | Integrated |
| Comparators | Integrated |
| Configurable Logic Cell (CLC) | Yes |
| Capture/Compare/PWM | MCCP/SCCP modules |
| I/O Pins | 24 |
| Tipo de montaje | Surface Mount |
| Estado RoHS | Compliant |
Configuración de pines de PIC24F08KM202T-I/ML
| Pin 1 | RA0 — Port A bit 0 / analog input AN0 |
| Pin 2 | RA1 — Port A bit 1 / analog input AN1 |
| Pin 3 | RA2 — Port A bit 2 / analog input AN2 |
| Pin 4 | RA3 — Port A bit 3 / analog input AN3 |
| Pin 5 | RA4 — Port A bit 4 |
| Pin 6 | VDD — Positive supply voltage |
| Pin 7 | VSS — Ground reference |
| Pin 8 | OSCI — Crystal oscillator input |
| Pin 9 | OSCO — Crystal oscillator output |
| Pin 10 | RA5 — Port A bit 5 |
| Pin 11 | RB0 — Port B bit 0 / programming PGD |
| Pin 12 | RB1 — Port B bit 1 / programming PGC |
| Pin 13 | RB2 — Port B bit 2 |
| Pin 14 | RB3 — Port B bit 3 |
| Pin 15 | RB4 — Port B bit 4 |
| Pin 16 | RB5 — Port B bit 5 |
| Pin 17 | RB6 — Port B bit 6 |
| Pin 18 | RB7 — Port B bit 7 |
| Pin 19 | RC0 — Port C bit 0 |
| Pin 20 | RC1 — Port C bit 1 |
| Pin 21 | RC2 — Port C bit 2 |
| Pin 22 | RC3 — Port C bit 3 |
| Pin 23 | RC4 — Port C bit 4 |
| Pin 24 | RC5 — Port C bit 5 |
| Pin 25 | RC6 — Port C bit 6 |
| Pin 26 | RC7 — Port C bit 7 |
| Pin 27 | MCLR — Master Clear (reset) input |
| Pin 28 | VSS — Ground reference (digital) |
Aplicaciones típicas
PIC24F08KM202T-I/ML es adecuado para 6 aplicacións: Battery-Powered IoT Sensor Node, Portable Medical Monitoring Device, Industrial Sensor Conditioning and Loop Control, Low-Power Wireless Remote Control, Smart Home and Building Automation, Consumer Audio and Mixed-Signal Display Control.
Battery-Powered IoT Sensor Node
The PIC24F08KM202T-I/ML fits IoT sensor nodes because its XLP nanoWatt sleep currents keep quiescent draw in the nanoampere range between measurement bursts, directly extending battery life. Its 1.8-5.5 V supply range accepts a single Li-ion cell or 2xAA pack without a boost regulator. The 19-channel 12-bit ADC and integrated op amps condition thermocouple, strain-gauge, or electrochemical sensor signals on-chip, eliminating external analog front-ends. Configurable Logic Cell (CLC) handles wake-up event routing without waking the CPU, and the 8 KB Flash runs simple LoRaWAN or BLE beacon stacks.
Recomendado
Portable Medical Monitoring Device
The PIC24F08KM202T-I/ML suits portable patient monitors where low noise, deterministic response, and low power matter. Its integrated 12-bit ADC, 8-bit DAC, and op amps condition ECG/PPG/biopotential signals directly, reducing analog BOM. The 16 MIPS performance runs R-peak detection and basic arrhythmia algorithms in real time at 32 MHz, while industrial -40 to +85 °C operation tolerates skin-contact thermal rise. XLP sleep between samples keeps average current in the microampere range, allowing multi-day battery operation for wearable pulse oximeters or glucose patch designs.
Recomendado
Industrial Sensor Conditioning and Loop Control
The PIC24F08KM202T-I/ML is a strong fit for industrial 4-20 mA loop transmitters and process sensor conditioners thanks to its integrated op amps (programmable gain), 12-bit ADC, and 8-bit DACs. The wide 1.8-5.5 V supply tolerates 24 V loop drop after regulation, and CLC logic implements hardware-based interlocks that bypass CPU latency for safety-critical trip thresholds. MCCP/SCCP timers support PWM-based proportional outputs, while 24 I/O lines interface to keypads, displays, and HART modems. The 28-QFN footprint suits compact DIN-A-3 sensor head enclosures.
Recomendado
Low-Power Wireless Remote Control
The PIC24F08KM202T-I/ML serves low-power wireless remotes (Sub-GHz, BLE, proprietary RF) because its XLP sleep modes keep idle current below 1 µA while waiting for user input, and it wakes within microseconds on CLC interrupt events. The 16-bit PIC core runs encoder/scanner firmware and rolling-code security algorithms, while CLC debounces key matrices in hardware before waking the core. Its 1.8-5.5 V range accepts a single coin cell or 2xAAA battery, and the 28-QFN fits behind a membrane keypad without adding thickness.
Recomendado
Smart Home and Building Automation
For smart-home sensor and actuator nodes (thermostats, occupancy sensors, smart dimmers) the PIC24F08KM202T-I/ML integrates the analog chain (ADC, op amps, DAC) on-chip and drives TRIAC/LED PWM directly through its MCCP/SCCP modules. CLC implements zero-cross detect and dimming phase control in hardware, freeing the CPU for higher-level protocols. The 8 KB Flash fits simple Zigbee/Z-Wave/BLE bridge or Matter-ready application code, and XLP sleep keeps battery-powered door/window sensors running for years. The 28-QFN (6x6 mm) supports compact in-fixture designs.
Recomendado
Consumer Audio and Mixed-Signal Display Control
The PIC24F08KM202T-I/ML fits small consumer audio and display peripherals (Bluetooth speakers, LED controllers, simple HMI panels) where its DAC, op amps, and PWM combine to drive LEDs or small Class-D audio stages. CLC implements audio routing and pulse-density modulation in hardware. The 16 MIPS core runs audio effect DSP and LED pattern generation, while XLP extends portable playback on a single Li-ion cell. The 28-QFN (6x6 mm) keeps the footprint small for tight consumer enclosures.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC24F08KM202T-I/ML — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC24F08KM102T-I/ML | PIC24F08KM202-I/ML | PIC24F08KM102-I/SO |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) |
| Core | 16-bit PIC24F | 16-bit PIC24F | 16-bit PIC24F | 16-bit PIC24F |
| Flash | 8 KB | 16 KB | 8 KB | 16 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 2 KB |
| EEPROM | 512 B | 512 B | 512 B | 512 B |
| Max Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| Supply Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Integrated Analog | 12-bit ADC, 8-bit DAC, op amps, CLC | 12-bit ADC, 8-bit DAC, op amps, CLC | 12-bit ADC, 8-bit DAC, op amps, CLC | 12-bit ADC, 8-bit DAC, op amps, CLC |
Diferenciadores clave
- Higher Flash memory headroom at same package (frente a PIC24F08KM102T-I/ML)
- Tape-and-reel factory-fit for high-volume lines (frente a PIC24F08KM202-I/ML)
- Full on-chip analog integration (frente a PIC24FJ64GA002-I/ML)
Notas de diseño
The PIC24F08KM202T-I/ML's XLP nanoWatt sleep modes require careful peripheral gating before entry. Estimated: with the ADC and op amps disabled and the CPU in Sleep, the datasheet's typical Sleep current is in the nanoampere range; leaving any analog peripheral active can push sleep current into the microampere range and erase the XLP benefit. Always disable unused analog modules in firmware before WFI/Sleep entry and verify with a µCurrent probe on a populated board.
The 28-QFN (6x6 mm) package has an exposed thermal pad that MUST be soldered to a copper pour on the PCB. Estimated: with the EP soldered to at least 1 cm² of 2-oz copper, the datasheet's thermal resistance θJA drops by roughly 30-40 % versus an unsoldered EP. Connect the EP to the ground plane with multiple thermal vias for best heat spreading. Decouple VDD with a 100 nF ceramic capacitor placed within 3 mm of the VDD pin, plus a bulk 4.7 µF capacitor on the same net.
When using the integrated 12-bit ADC, drive the analog inputs through an RC low-pass filter (typically 1 kΩ + 100 nF) to limit broadband noise folding into the ADC bandwidth. Estimated: at 32 MHz system clock the ADC's effective number of bits (ENOB) can drop by 1-2 LSB if the analog source impedance exceeds the datasheet's recommended maximum. The integrated op amps help buffer high-impedance sensors, but always route analog traces away from digital switching lines and keep the analog ground island contiguous with the EP ground.
A common pitfall is forgetting to configure the Configuration bits for the oscillator mode; leaving the default FRC (internal 8 MHz) without proper PLL setup will lock the firmware at 8 MHz instead of the intended 32 MHz. Always set the Configuration bits in the IDE project properties to match the hardware crystal/oscillator configuration. Another common error is leaving the MCLR pin floating; if MCLR is unused, tie it to VDD through a 10 kΩ resistor to prevent spurious resets from noise.
Información de cumplimiento
RoHS and REACH compliance per Microchip product page. Not AEC-Q100 qualified; for automotive-grade equivalents consider PIC24F KM family automotive parts. Industrial -40 to +85 °C operating range.
