SN74HC623N - 8-Bit 3-State Bus Transceiver | Texas Instruments
N.º de pieza: SN74HC623N ✓ ActivoSN74HC623N Descripción general
A bus transceiver is a bidirectional interface IC that connects a digital system to shared parallel buses. The bus transceiver category belongs to the broader digital logic hierarchy, which includes buffers, drivers, receivers, transceivers, and interface ICs. Unlike a unidirectional buffer or driver, a transceiver can receive data from a bus and drive the same bus when enabled. The 3-state output condition provides a high-impedance state that electrically isolates a device from the shared conductor whenever it is not selected.
The SN74HC623 is designed around the SN74HC logic family. Its key documented characteristics include eight non-inverting transceiver channels, three-state outputs, one 8-bit element, and a 20-pin DIP package. These attributes make it suitable for systems that need controlled bidirectional access to a parallel bus. Exact propagation-delay, current, voltage, and temperature limits should be taken from the corresponding Texas Instruments datasheet tables during design sign-off.
The three-state output control is especially useful in bus arbitration, memory interfacing, peripheral sharing, and modular computer architectures. When a connected device is not participating in a transfer, its outputs can be disabled to avoid bus contention. When enabled, the transceiver provides a defined logic path between the bus and the host-side logic. Designers should still check the data sheet for direction-control timing, output-drive capability, and input thresholds required by the particular system.
SN74HC623N is appropriate for conventional TTL and CMOS-compatible systems that specifically require a DIP-compatible octal bus interface. The N suffix identifies the listed 20-pin plastic DIP configuration, which is useful for legacy motherboard designs, controller boards, prototypes, and maintenance systems that cannot accept a surface-mount package. The through-hole format also simplifies socketed prototyping and field replacement where an appropriate qualified socket and insertion system are used.
PCB implementation should preserve the standard 20-pin DIP pin numbering and provide adequate clearance around the package. Supply rails should be decoupled close to the device using the capacitance values specified by the manufacturer, and every unused input must be connected to a defined logic level. Because a transceiver can actively drive a bus, system designers should verify enable timing and ensure that no two enabled outputs conflict during mode transitions.
This page combines the manufacturer product identity, package information, sourcing details, drop-in alternatives, and practical implementation guidance for engineers evaluating the SN74HC623N. For an exact replacement decision, confirm the full ordering suffix, operating-voltage range, temperature grade, logic thresholds, timing limits, and pin function against the original system requirements before releasing a production BOM.
Alternativas directas para SN74HC623N — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
SN74HCT623N
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
SN74HC623N Valores máximos y características eléctricas
| Device Type | Octal bus transceiver |
| Logic Family | SN74HC |
| Number of Bits | 8 bits |
| Element Count | 1 element |
| Bits per Element | 8 bits |
| Direction | Bidirectional |
| Logic Polarity | Non-inverting |
| Output State | 3-state |
| Encapsulado | 20-pin plastic DIP (PDIP) |
| Package Body Width | 0.300 in (7.62 mm) |
| Tipo de montaje | Through-hole |
| Packaging Form | Tube |
| AEC-Q100 Qualification | not_applicable |
Guía de configuración de pines de SN74HC623N 0.300 in (7.62 mm)
Configuración de pines para SN74HC623N (encapsulado 0.300 in (7.62 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para SN74HC623N.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
SN74HC623N es adecuado para 6 aplicacións: Shared Parallel Computer Bus, Memory-Module Bus Interface, Peripheral Sharing and Arbitration, Industrial Control Backplane, Legacy CPU Data-Bus Isolation, Test and Measurement Data Interface.
Shared Parallel Computer Bus
The SN74HC623N can connect one controller or peripheral card to a shared eight-bit parallel bus when both sides require controlled bidirectional participation. Its eight non-inverting channels and three-state outputs allow unused devices to isolate themselves from the bus, while an active device can receive data or place a valid logic level on the line. The 20-pin PDIP format is useful in legacy expansion systems, controller boards, and prototypes that require a socketable through-hole component. Before finalizing the interface, verify enable timing, input thresholds, output-drive strength, bus capacitance, and the maximum supported clock rate against the Texas Instruments datasheet.
Recomendado
Memory-Module Bus Interface
The SN74HC623N is suitable for a legacy memory or peripheral bus where several devices may need access to the same eight data conductors. Its three-state outputs are the key implementation benefit: a device that is not selected can remain electrically disconnected, preventing unwanted drive contention while another participant transfers data. The eight non-inverting channels support byte-wide parallel signaling. A sound design must define every control state during power-up and reset, check setup and hold timing against the bus clock, and confirm that the connected memory technology has compatible voltage levels and output impedance.
Recomendado
Peripheral Sharing and Arbitration
The SN74HC623N can be used in peripheral-sharing arrangements where two or more bus agents must not drive the same line simultaneously. Three-state outputs allow an inactive agent to release the bus, while proper arbitration logic enables only the intended participant. The device's non-inverting operation simplifies integration with ordinary active-high logic, and the 20-pin PDIP package supports repairable and socketed industrial controller hardware. Engineers should establish deterministic enable priorities, provide pull resistors where required by the interface specification, and validate break-before-make behavior during every arbitration transition.
Recomendado
Industrial Control Backplane
The SN74HC623N can interface a control card with an industrial backplane carrying byte-wide data and shared control signals. Its through-hole package is particularly practical for legacy PLC and industrial controller revisions that use socketed logic and demand straightforward field replacement. The three-state outputs help isolate inactive modules from a common bus, reducing the chance of data contention. The circuit should use a defined termination and biasing strategy, maintain compatible logic thresholds across every attached module, and include protection appropriate to the installation environment rather than assuming that the logic device alone handles connector transients.
Recomendado
Legacy CPU Data-Bus Isolation
The SN74HC623N can place a selected byte of logic between a legacy processor bus and a local subsystem while the three-state outputs isolate the local device from the bus when it is not selected. This arrangement is useful in controller revisions where address decoding and bus contention are managed by external logic. The 20-pin PDIP package makes it practical to update existing through-hole boards without changing their mechanical footprint. Designers should inspect the datasheet's direction-control truth table, account for bus rise and fall times, and ensure that every transition prevents overlap between an outgoing bus driver and the local subsystem's output driver.
Recomendado
Test and Measurement Data Interface
The SN74HC623N can be used as a selectable byte-wide interface between a test fixture, instrument, and external digital bus. Its three-state behavior allows several instrument functions to share conductors without requiring every node to remain permanently active. The non-inverting channel arrangement supports straightforward connection to common control logic, and the PDIP package is convenient for laboratory adapters and hand-built test hardware. For dependable measurements, the bus must have controlled thresholds, defined idle states, suitable clock and settling margins, and no unintended capacitive loading from long fixture wiring.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para SN74HC623N — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | SN74HCT623N |
|---|---|---|
| Package | 20-pin PDIP | 20-pin PDIP |
| Brand | Texas Instruments | Texas Instruments |
| Device Type | Octal bus transceiver | Octal bus transceiver |
| Logic Family | SN74HC | SN74HCT |
| Number of Bits | 8 bits | 8 bits |
| Element Count | 1 element | 1 element |
| Logic Polarity | Non-inverting | Non-inverting |
| Output State | 3-state | 3-state |
| Input Threshold Family | HC CMOS thresholds | TTL-compatible thresholds |
Diferenciadores clave
- HC CMOS input-threshold behavior (frente a SN74HCT623N)
- Exact through-hole footprint (frente a SN74HCT623N)
- Matching octal three-state bus interface (frente a SN74HCT623N)
Notas de diseño
Treat output-enable and direction transitions as a bus-safety problem, not merely a timing detail. Ensure the control logic produces break-before-make behavior so that the outgoing driver releases a line before the next device begins driving it. Use the SN54HC623 and SN74HC623 datasheet truth table to confirm every mode, and bring all enable inputs to defined states during power-up and reset so that no two devices contend on the bus.
Use the standard 20-pin PDIP footprint, preserve pin-1 orientation, and avoid placing tall components where they interfere with socket removal. Place the manufacturer-recommended bypass capacitor close to the supply and ground pins with a short current path. Keep the eight bus traces reasonably short, provide a continuous ground reference, and route control traces away from high-current switching nodes to reduce opportunities for false bus transitions.
Validate the complete bus topology rather than relying on the nominal logic speed. Account for conductor length, connector capacitance, stub effects, pull-up or pull-down strength, and the selected transceiver's output-drive capability. Confirm that rise and fall times meet the receiving device's limits and that the clock rate satisfies the worst-case propagation-delay and setup-time combination. Scheduled testing with an oscilloscope can reveal ringing and enable overlap that static logic analysis may miss.
Confirm the SN74HC623N supply limits and input-threshold behavior against the voltages produced by every connected device. The HC and HCT logic families must not be treated as interchangeable merely because their packages match. Check high-level and low-level noise margin at the actual supply voltage, and ensure that the supply remains within its rated range during startup, reset, and loaded bus transitions.
Información de cumplimiento
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified in the product listings. AEC-Q100 is not applicable to this general-purpose commercial logic device.