Texas Instruments

SN74HC623N - 8-Bit 3-State Bus Transceiver | Texas Instruments

MPN: SN74HC623N ✓ فعال
20-pin plastic DIP (PDIP) Package
MOQ: 1 |

SN74HC623N جائزہ

Texas Instruments SN74HC623N is an octal, non-inverting bus transceiver with 3-state outputs, supplied in a 20-pin plastic DIP package. The device combines an 8-bit parallel bus interface with high-impedance output control, allowing multiple logic devices to share a bidirectional data bus while disabled. Each of its eight channels provides a non-inverting transceiver element, and the complete device is identified as one 8-bit element with three-state outputs.

A bus transceiver is a bidirectional interface IC that connects a digital system to shared parallel buses. The bus transceiver category belongs to the broader digital logic hierarchy, which includes buffers, drivers, receivers, transceivers, and interface ICs. Unlike a unidirectional buffer or driver, a transceiver can receive data from a bus and drive the same bus when enabled. The 3-state output condition provides a high-impedance state that electrically isolates a device from the shared conductor whenever it is not selected.

The SN74HC623 is designed around the SN74HC logic family. Its key documented characteristics include eight non-inverting transceiver channels, three-state outputs, one 8-bit element, and a 20-pin DIP package. These attributes make it suitable for systems that need controlled bidirectional access to a parallel bus. Exact propagation-delay, current, voltage, and temperature limits should be taken from the corresponding Texas Instruments datasheet tables during design sign-off.

The three-state output control is especially useful in bus arbitration, memory interfacing, peripheral sharing, and modular computer architectures. When a connected device is not participating in a transfer, its outputs can be disabled to avoid bus contention. When enabled, the transceiver provides a defined logic path between the bus and the host-side logic. Designers should still check the data sheet for direction-control timing, output-drive capability, and input thresholds required by the particular system.

SN74HC623N is appropriate for conventional TTL and CMOS-compatible systems that specifically require a DIP-compatible octal bus interface. The N suffix identifies the listed 20-pin plastic DIP configuration, which is useful for legacy motherboard designs, controller boards, prototypes, and maintenance systems that cannot accept a surface-mount package. The through-hole format also simplifies socketed prototyping and field replacement where an appropriate qualified socket and insertion system are used.

PCB implementation should preserve the standard 20-pin DIP pin numbering and provide adequate clearance around the package. Supply rails should be decoupled close to the device using the capacitance values specified by the manufacturer, and every unused input must be connected to a defined logic level. Because a transceiver can actively drive a bus, system designers should verify enable timing and ensure that no two enabled outputs conflict during mode transitions.

This page combines the manufacturer product identity, package information, sourcing details, drop-in alternatives, and practical implementation guidance for engineers evaluating the SN74HC623N. For an exact replacement decision, confirm the full ordering suffix, operating-voltage range, temperature grade, logic thresholds, timing limits, and pin function against the original system requirements before releasing a production BOM.

کے لیے ڈراپ اِن متبادل SN74HC623N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

SN74HCT623N

✅ ڈراپ-اِن
📦 20-pin PDIP
Uses HCT TTL-compatible input thresholds instead of the SN74HC family's supply-referenced thresholds; the listed function and 20-pin PDIP footprint remain the same

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

SN74HC623N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Device Type Octal bus transceiver
Logic Family SN74HC
Number of Bits 8 bits
Element Count 1 element
Bits per Element 8 bits
Direction Bidirectional
Logic Polarity Non-inverting
Output State 3-state
پیکیج 20-pin plastic DIP (PDIP)
Package Body Width 0.300 in (7.62 mm)
ماؤنٹنگ ٹائپ Through-hole
Packaging Form Tube
AEC-Q100 Qualification not_applicable

SN74HC623N 0.300 in (7.62 mm) پن کنفیگریشن گائیڈ

SN74HC623N (0.300 in (7.62 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

SN74HC623N کے لیے 0.300 in (7.62 mm) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SN74HC623N.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

SN74HC623N کے لیے موزوں ہے 6 ایپلیکیشنs: Shared Parallel Computer Bus, Memory-Module Bus Interface, Peripheral Sharing and Arbitration, Industrial Control Backplane, Legacy CPU Data-Bus Isolation, Test and Measurement Data Interface.

🖥️

Shared Parallel Computer Bus

The SN74HC623N can connect one controller or peripheral card to a shared eight-bit parallel bus when both sides require controlled bidirectional participation. Its eight non-inverting channels and three-state outputs allow unused devices to isolate themselves from the bus, while an active device can receive data or place a valid logic level on the line. The 20-pin PDIP format is useful in legacy expansion systems, controller boards, and prototypes that require a socketable through-hole component. Before finalizing the interface, verify enable timing, input thresholds, output-drive strength, bus capacitance, and the maximum supported clock rate against the Texas Instruments datasheet.

🖥️

Memory-Module Bus Interface

The SN74HC623N is suitable for a legacy memory or peripheral bus where several devices may need access to the same eight data conductors. Its three-state outputs are the key implementation benefit: a device that is not selected can remain electrically disconnected, preventing unwanted drive contention while another participant transfers data. The eight non-inverting channels support byte-wide parallel signaling. A sound design must define every control state during power-up and reset, check setup and hold timing against the bus clock, and confirm that the connected memory technology has compatible voltage levels and output impedance.

🏭

Peripheral Sharing and Arbitration

The SN74HC623N can be used in peripheral-sharing arrangements where two or more bus agents must not drive the same line simultaneously. Three-state outputs allow an inactive agent to release the bus, while proper arbitration logic enables only the intended participant. The device's non-inverting operation simplifies integration with ordinary active-high logic, and the 20-pin PDIP package supports repairable and socketed industrial controller hardware. Engineers should establish deterministic enable priorities, provide pull resistors where required by the interface specification, and validate break-before-make behavior during every arbitration transition.

🏭

Industrial Control Backplane

The SN74HC623N can interface a control card with an industrial backplane carrying byte-wide data and shared control signals. Its through-hole package is particularly practical for legacy PLC and industrial controller revisions that use socketed logic and demand straightforward field replacement. The three-state outputs help isolate inactive modules from a common bus, reducing the chance of data contention. The circuit should use a defined termination and biasing strategy, maintain compatible logic thresholds across every attached module, and include protection appropriate to the installation environment rather than assuming that the logic device alone handles connector transients.

🔧

Legacy CPU Data-Bus Isolation

The SN74HC623N can place a selected byte of logic between a legacy processor bus and a local subsystem while the three-state outputs isolate the local device from the bus when it is not selected. This arrangement is useful in controller revisions where address decoding and bus contention are managed by external logic. The 20-pin PDIP package makes it practical to update existing through-hole boards without changing their mechanical footprint. Designers should inspect the datasheet's direction-control truth table, account for bus rise and fall times, and ensure that every transition prevents overlap between an outgoing bus driver and the local subsystem's output driver.

🧩

Test and Measurement Data Interface

The SN74HC623N can be used as a selectable byte-wide interface between a test fixture, instrument, and external digital bus. Its three-state behavior allows several instrument functions to share conductors without requiring every node to remain permanently active. The non-inverting channel arrangement supports straightforward connection to common control logic, and the PDIP package is convenient for laboratory adapters and hand-built test hardware. For dependable measurements, the bus must have controlled thresholds, defined idle states, suitable clock and settling margins, and no unintended capacitive loading from long fixture wiring.

What is the SN74HC623N?
The SN74HC623N is a Texas Instruments octal bus transceiver with non-inverting, 3-state outputs in a 20-pin plastic DIP package. According to the Texas Instruments product page, it is a single 8-bit transceiver element intended for digital bus-interface applications. Its three-state outputs allow an enabled channel to drive the bus while a disabled channel presents a high-impedance condition. The N suffix denotes the listed through-hole package configuration.
What is the operating voltage of SN74HC623N?
The SN74HC623N operating-voltage limits must be confirmed in the Texas Instruments SN54HC623 and SN74HC623 datasheet before use in a new design. The verified product description identifies the device as part of the SN74HC logic family, but it does not print the supply-voltage range. Designers should use the manufacturer datasheet for the nominal range, absolute maximum ratings, input thresholds, and output levels rather than relying on a generic CMOS assumption.
Where can I download the SN74HC623N datasheet PDF?
The official SN74HC623 datasheet can be downloaded from the Texas Instruments document link at https://www.ti.com/lit/gpn/SN74HC623. The manufacturer identifies the document as covering the SN54HC623 and SN74HC623 devices. Use that document for the complete pin descriptions, timing tables, electrical characteristics, operating limits, and ordering information required for a production design.
Where can I find the SN74HC623N pinout?
The SN74HC623N pinout is shown in the pin-configuration diagram of the Texas Instruments SN54HC623 and SN74HC623 datasheet. The device is packaged as a 20-pin plastic DIP, and its numbered pins must be assigned from that diagram rather than from a generic 74-series layout. Check the enable and direction-control functions carefully because incorrect state sequencing can place multiple drivers on the shared bus.
Is the SN74HC623N suitable for bidirectional bus sharing?
Yes, the SN74HC623N is suitable for controlled bidirectional bus sharing because it is an octal bus transceiver with three-state outputs. Each channel can participate in a bus transfer while disabled channels isolate the device from the bus. The system must ensure that only one output driver is enabled on a shared line at a time. Check the manufacturer timing and output-drive specifications against the bus capacitance and intended clock rate.
What is the difference between SN74HC623N and SN74HCT623N?
SN74HCT623N is the HCT counterpart to the SN74HC623N and uses TTL-compatible input thresholds while retaining the same octal, non-inverting, three-state bus-transceiver function. The SN74HC623N belongs to the HC CMOS logic family, whose input thresholds are generally referenced to the device supply voltage. Both listed versions use a 20-pin PDIP format, making the package mechanically compatible, but logic-level compatibility must be verified in the system.
Can SN74HCT623N replace SN74HC623N?
SN74HCT623N can serve as a drop-in replacement when its TTL-compatible input thresholds, supply-voltage requirements, timing ratings, output-drive capability, and enable logic satisfy the original circuit. Both parts are listed as non-inverting, one-element, 8-bit transceivers with three-state outputs in a 20-pin PDIP package. The key selection issue is not the footprint but whether the HCT input thresholds provide reliable noise margin with the source device and supply rail.
What is the best drop-in replacement for SN74HC623N?
SN74HCT623N is the verified drop-in candidate for SN74HC623N because both use the same 20-pin PDIP format and implement an octal non-inverting transceiver with three-state outputs. It is most appropriate when the connected logic uses TTL-compatible thresholds. The HCT part can have different input-threshold and timing characteristics from the HC version, so check those parameters and the required supply voltage before finalizing the substitution.
When should I choose SN74HCT623N instead of SN74HC623N?
Choose SN74HCT623N instead of SN74HC623N when the driving circuit uses TTL-level signals and the bus interface requires TTL-compatible input thresholds. Keep the SN74HC623N when the system operates entirely in the HC CMOS domain or when the HC part's supply-referenced thresholds provide the intended noise margin. Package fit is the same, so input-threshold behavior, supply voltage, timing, and output loading drive the decision.
Is SN74HC623N in stock and what is its lead time?
Current stock, minimum order quantity, and production lead time should be requested through the Request a Quote form on this page. The verified distributor results show inventory and immediate-shipment messaging, but those records do not establish a fixed quantity-break schedule or a guaranteed lead time for every order. The quote form should be used to confirm the exact SN74HC623N suffix, tube quantity, current availability, and delivery plan.
Where can I buy SN74HC623N online?
Use the Request a Quote form on this page to request SN74HC623N availability, current commercial terms, and a delivery quote. The form avoids presenting a stale quantity-break table and allows the exact 20-pin PDIP ordering configuration to be confirmed. Engineers should include the required tube quantity, acceptable delivery date, and whether any traceability or inspection documentation is needed.
What is the price of SN74HC623N?
A current commercial quote for SN74HC623N is available through the Request a Quote form on this page. The price depends on order quantity, packaging form, market availability, and delivery requirements. Do not rely on an archived unit-price record for budgeting a new production run because the historical figure does not reflect current inventory or volume terms.
How do I design the PCB around SN74HC623N?
Design the board around the standard 20-pin PDIP footprint and preserve the manufacturer's pin numbering, including the pin-1 orientation indicated by the package drawing. Provide a short, direct supply connection and place the recommended bypass capacitor close to the device's supply and ground pins. Route the eight bus channels to minimize stubs and crosstalk, and confirm that all control inputs remain in valid states during reset and mode transitions.
What are the key specifications of SN74HC623N that engineers should know?
The principal documented specifications are eight non-inverting transceiver bits, one transceiver element, three-state outputs, the SN74HC logic family, and a 20-pin PDIP package with a 0.300-inch, 7.62-mm body width. The device is therefore intended for controlled bidirectional access to a shared parallel bus. Supply voltage, timing, current, temperature, and enable thresholds must be taken from the Texas Instruments datasheet for each production configuration.
What can replace SN74HC623N?
SN74HCT623N is the documented drop-in candidate for SN74HC623N because it retains the 20-pin PDIP footprint and the same octal, non-inverting, three-state transceiver configuration. It is suitable when TTL-compatible input thresholds are acceptable. No additional same-package replacement can be responsibly confirmed from the available cross-reference records, so a broader substitution should be checked against pinout, enable timing, supply voltage, logic thresholds, and output-drive requirements.

کے لیے انجینئرنگ ریفرنس ڈیٹا SN74HC623N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose SN74HC623N for legacy 5 V CMOS-compatible systems that use the HC logic family and require an octal, non-inverting, three-state transceiver in a 20-pin PDIP package. Choose SN74HCT623N when the connected source uses TTL-compatible signal levels or when the HCT input thresholds provide better noise margin. Because both alternatives use the same mechanical footprint, package interchangeability is straightforward; electrical substitution still requires checking supply voltage, propagation delay, output current, enable timing, and logic thresholds. For a new PCB, a surface-mount implementation may be mechanically preferable, but the SN74HC623N remains valuable for socketed legacy systems, repair inventories, and DIP-compatible prototypes. Avoid selecting either part solely from the octal-transceiver description: confirm the direction and enable truth table, operating-temperature grade, bus timing, and three-state output behavior from the manufacturer datasheet before releasing the design.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ SN74HCT623N
Package 20-pin PDIP 20-pin PDIP
Brand Texas Instruments Texas Instruments
Device Type Octal bus transceiver Octal bus transceiver
Logic Family SN74HC SN74HCT
Number of Bits 8 bits 8 bits
Element Count 1 element 1 element
Logic Polarity Non-inverting Non-inverting
Output State 3-state 3-state
Input Threshold Family HC CMOS thresholds TTL-compatible thresholds

اہم امتیازی خصوصیات

  • HC CMOS input-threshold behavior (بمقابلہSN74HCT623N)
  • Exact through-hole footprint (بمقابلہSN74HCT623N)
  • Matching octal three-state bus interface (بمقابلہSN74HCT623N)

ڈیزائن نوٹس

Treat output-enable and direction transitions as a bus-safety problem, not merely a timing detail. Ensure the control logic produces break-before-make behavior so that the outgoing driver releases a line before the next device begins driving it. Use the SN54HC623 and SN74HC623 datasheet truth table to confirm every mode, and bring all enable inputs to defined states during power-up and reset so that no two devices contend on the bus.

Use the standard 20-pin PDIP footprint, preserve pin-1 orientation, and avoid placing tall components where they interfere with socket removal. Place the manufacturer-recommended bypass capacitor close to the supply and ground pins with a short current path. Keep the eight bus traces reasonably short, provide a continuous ground reference, and route control traces away from high-current switching nodes to reduce opportunities for false bus transitions.

Validate the complete bus topology rather than relying on the nominal logic speed. Account for conductor length, connector capacitance, stub effects, pull-up or pull-down strength, and the selected transceiver's output-drive capability. Confirm that rise and fall times meet the receiving device's limits and that the clock rate satisfies the worst-case propagation-delay and setup-time combination. Scheduled testing with an oscilloscope can reveal ringing and enable overlap that static logic analysis may miss.

Confirm the SN74HC623N supply limits and input-threshold behavior against the voltages produced by every connected device. The HC and HCT logic families must not be treated as interchangeable merely because their packages match. Check high-level and low-level noise margin at the actual supply voltage, and ensure that the supply remains within its rated range during startup, reset, and loaded bus transitions.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified in the product listings. AEC-Q100 is not applicable to this general-purpose commercial logic device.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

SN74HC623N datasheet SN74HC623N pinout SN74HC623N datasheet pdf SN74HC623N equivalent SN74HC623N replacement SN74HC623N vs SN74HCT623N Texas Instruments SN74HC623N SN74HC623N 20-DIP transceiver SN74HC623N bidirectional bus SN74HC623N price SN74HC623N stock SN74HC623N application circuit

متعلقہ اجزاء اور اصطلاحات

Texas Instruments SN74HC623N SN74HCT623N SN74HC623 SN54HC623 Octal bus transceiver Bidirectional transceiver Three-state output High-impedance state Digital logic IC Interface IC CMOS logic TTL-compatible logic Parallel bus Bus arbitration Peripheral sharing 20-pin PDIP PDIP package family Through-hole package Surface-mount alternative Propagation delay Output drive current Noise margin Bus capacitance Texas Instruments SN54HC623 and SN74HC623 datasheet
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں