Texas Instruments

THS4081CD - 175MHz Low-Power Voltage-Feedback Amplifier | TI

N.º de pieza: THS4081CD ✓ Activo
3.4 mA per channel Id 8-pin SOIC (D), 3.90 mm body width Package
MOQ: 1 |

THS4081CD Descripción general

Texas Instruments THS4081CD is a single-channel, low-power voltage-feedback operational amplifier with 175 MHz small-signal bandwidth, 230 V/us slew rate, and 3.4 mA quiescent current per channel. The device is packaged in an 8-pin SOIC (D) and is specified for a 0°C to 70°C ambient-temperature range. It combines high-speed signal amplification with relatively low power consumption for communications, video, test-and-measurement, and general-purpose analog signal-chain designs.

A voltage-feedback operational amplifier is an analog amplifier that uses negative feedback to control gain, bandwidth, and output impedance. The THS4081 belongs to the broader hierarchy of operational amplifiers, analog amplifiers, signal-conditioning ICs, and semiconductor devices. Unlike power amplifiers designed mainly to drive loudspeakers or high-current loads, this amplifier is intended for low-voltage analog signals and typically operates with external feedback components.

The main performance characteristics include 175 MHz bandwidth, 230 V/us slew rate, and 43 ns settling time to 0.1%. The amplifier also offers 85 mA typical output-drive capability and 35 MHz differential video bandwidth at a gain of 1. Its low 3.4 mA quiescent current makes it suitable for power-conscious equipment while retaining the bandwidth needed for high-speed video, communications, instrumentation, and active-filter applications.

The THS4081 uses a conventional voltage-feedback architecture. Closed-loop bandwidth and gain are established by the external resistor network, while the amplifier's high slew rate helps preserve large-signal behavior and settling performance. The combination of 175 MHz bandwidth and 43 ns settling time is particularly useful in circuits that must process waveforms with short rise and fall times, including video buffering, communications receivers, data-conversion interfaces, and active filtering.

Typical applications include video signal conditioning, communications equipment, test-and-measurement instruments, analog-to-digital converter input interfaces, digital-to-analog converter output interfaces, and low-power high-speed signal buffers. When the amplifier drives a capacitive load, routing, output-current capability, load impedance, and stability should be evaluated together rather than relying on bandwidth alone.

The main design consideration is power-supply implementation. Keep input and output return paths short, place decoupling capacitors close to the supply pins, and use a stable feedback layout that minimizes parasitic capacitance. Because the specified 0°C to 70°C range applies to THS4081CD, designs requiring wider industrial temperature coverage should select the appropriate temperature-grade ordering option after reviewing its datasheet.

This product page combines the manufacturer specifications, ordering information, technical application guidance, and drop-in replacement analysis to support faster component selection and PCB design. Use the manufacturer datasheet and pin-description table for final footprint, pinout, electrical-limit, and layout verification before releasing a production design.

Alternativas directas para THS4081CD — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con THS4081CD (mismo factor de forma y huella) — difiere en Operating Temperature, Package, Slew Rate, Small-Signal Bandwidth.

Texas Instruments
Operating Temperature: -40°C to 85°C
Package: 8-SOIC (D)
Slew Rate: 230 V/µs
Comparar con THS4081CD →

THS4081CDR

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 SOIC-8 (D)
Same THS4081 electrical configuration and SOIC-8 pinout; ordering code differs only by reel packing, with 0% electrical-parameter difference

📋 Alternativa de referencia (no en el catálogo)

THS4081ID

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Texas Instruments
📦 SOIC-8 (D)
Voltage-Feedback Operational Amplifier · 1 channel · 175 MHz (-3 dB) · 230 V/µs · 3.4 mA per channel · 43 ns to 0.1% · 85 mA typical · 35 MHz

Consulte el precio

Ver hoja de datos →

THS4081IDR

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 SOIC-8 (D)
Same THS4081 family and 8-pin SOIC pinout with an industrial-temperature ordering code and reel packing; core AC ratings remain 0% different

📋 Alternativa de referencia (no en el catálogo)

THS4081CD Valores máximos y características eléctricas

Amplifier Type Voltage-feedback operational amplifier
Number of Channels 1 channel
Small-Signal Bandwidth 175 MHz at -3 dB
Slew Rate 230 V/us
Corriente en reposo 3.4 mA per channel
Output Drive Capability 85 mA typical
Settling Time 43 ns to 0.1%
Differential Video Bandwidth 35 MHz at gain of 1, with 0.1 dB differential gain variation
Differential Gain Phase 0.05 degrees
Encapsulado 8-pin SOIC (D), 3.90 mm body width
Temperatura de funcionamiento 0°C to 70°C
Tipo de montaje Surface mount
Product Description 175 MHz low-power voltage-feedback amplifier
Primary Applications Communications and video applications
Feedback Architecture Voltage feedback

Configuración de pines de THS4081CD

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 NC — Not connected
Pin 2 -IN — Inverting input
Pin 3 +IN — Non-inverting input
Pin 4 V- — Negative power-supply connection
Pin 5 NC — Not connected
Pin 6 OUT — Output
Pin 7 V+ — Positive power-supply connection
Pin 8 NC — Not connected

Aplicaciones típicas

THS4081CD es adecuado para 6 aplicacións: Video Signal Buffering, Communications Receiver Signal Path, Data Converter Interface, Active Filtering, Test and Measurement Instrumentation, Analog Signal Conditioning.

📺

Video Signal Buffering

The THS4081CD fits video buffering because Texas Instruments specifies 175 MHz small-signal bandwidth and 35 MHz differential video bandwidth at a gain of 1. Its 230 V/us slew rate also supports rapid output transitions when driven into the documented load range. The low 3.4 mA quiescent current can simplify thermal and power budgeting in multi-channel video equipment. Use short PCB return paths, suitable decoupling, and a termination arrangement appropriate to the source and destination impedance.

🌐

Communications Receiver Signal Path

For communications receiver front ends, the THS4081CD provides 175 MHz bandwidth and 230 V/us slew rate for conditioning intermediate-frequency or other high-speed analog nodes. Its 3.4 mA quiescent current is useful when multiple amplifier stages consume limited supply power, while the 43 ns settling time supports pulse and waveform conditioning. The designer should select gain and feedback values for the required bandwidth and verify input noise, output swing, and stability against the manufacturer electrical tables.

🖥️

Data Converter Interface

The THS4081CD can serve as an interface amplifier around data converters when the converter requires a low-noise, high-bandwidth drive or receive stage. Its 175 MHz bandwidth and 85 mA typical output-drive capability provide useful margin for driving sampling networks or isolated converter inputs. The 230 V/us slew rate helps preserve edge information during transitions. Keep the feedback loop compact, isolate capacitive kickback from the converter, and verify settling against the converter's acquisition requirements.

🔧

Active Filtering

The THS4081CD is appropriate for high-frequency active-filter stages requiring more bandwidth than conventional precision amplifiers. Its 175 MHz small-signal bandwidth and 230 V/us slew rate allow multiple amplifier functions to operate over a broad frequency range, while 3.4 mA quiescent current controls per-stage consumption. Select resistor and capacitor values against the desired closed-loop response, and check the selected gain and phase margin because high-speed feedback networks can become sensitive to parasitic capacitance.

📡

Test and Measurement Instrumentation

The THS4081CD supports high-speed test and measurement front ends where accurate signal transitions and rapid settling are important. Its 43 ns settling time to 0.1%, 175 MHz bandwidth, and 230 V/us slew rate make it useful for waveform conditioning, trigger shaping, and buffer stages. The single-amplifier SOIC-8 package also supports compact analog boards. For precision amplitude measurement, complete a full error-budget review because offset, noise, and distortion figures must be checked from the manufacturer datasheet.

🏭

Analog Signal Conditioning

The THS4081CD can condition low-level analog signals in instrumentation and control systems that require a wider bandwidth than standard op-amp stages. Its 175 MHz bandwidth supports high-speed sensor and control-loop signals, while the 3.4 mA quiescent current benefits compact multi-channel designs. The voltage-feedback topology permits conventional external resistor feedback, but the feedback values must preserve the required signal gain without forcing the amplifier into an unstable or output-limited operating region.

Resumen de productos recomendados

THS4081CDR Same THS4081 amplifier configuration in reel-packed ordering code Se usa en: Video Signal Buffering, Active Filtering THS4081ID Texas Instruments Se usa en: Communications Receiver Signal Path, Test and Measurement Instrumentation THS4081IDR Same-family SOIC-8 amplifier option for broader-temperature system variants Se usa en: Data Converter Interface, Analog Signal Conditioning
What is the THS4081CD?
The THS4081CD is a single-channel, 175 MHz low-power voltage-feedback operational amplifier from Texas Instruments. According to the Texas Instruments THS4081 product information, it combines 230 V/us slew rate, 3.4 mA quiescent current per channel, 85 mA typical output-drive capability, and an 8-pin SOIC package. It is intended for communications, video, instrumentation, and other high-speed analog signal-processing applications.
What are the key specifications of THS4081CD that engineers should know?
The THS4081CD provides 175 MHz small-signal bandwidth, 230 V/us slew rate, 3.4 mA quiescent current per channel, and 43 ns settling time to 0.1%. Texas Instruments also specifies 85 mA typical output-drive capability and 35 MHz differential video bandwidth at gain 1. The device is offered in an 8-pin SOIC (D) package for a 0°C to 70°C operating-temperature range.
What is the bandwidth of THS4081CD?
The THS4081CD has 175 MHz small-signal bandwidth at -3 dB. According to the Texas Instruments THS4081 product information, the device also provides 35 MHz differential video bandwidth at a gain of 1 with 0.1 dB differential-gain variation and 0.05-degree differential-gain phase. These figures make it appropriate for wideband video and other high-speed closed-loop amplifier configurations.
How fast is the slew rate of THS4081CD?
The THS4081CD has a slew rate of 230 V/us. According to the Texas Instruments product information, this high slew rate supports rapid transitions through large output-voltage swings while the 175 MHz small-signal bandwidth covers a broad operating range. Actual closed-loop settling also depends on the gain, feedback network, load, supply voltage, and output-amplitude conditions.
Where can I download the THS4081CD datasheet PDF?
The official THS4081CD documentation is available through the Texas Instruments product page at https://www.ti.com/product/THS4081. Open the THS4081 datasheet from that page to review the pin description, recommended operating conditions, electrical characteristics, typical-performance plots, and application information. Use the official PDF for production release because distributor-hosted copies may not reflect the newest revision.
Where can I find the THS4081CD pinout?
The THS4081CD pinout is defined in the pin-configuration and pin-description tables of the official Texas Instruments THS4081 datasheet. The device is an 8-pin SOIC (D). When assigning PCB tracks, use the numbered pin diagram and the manufacturer's package drawing together, and verify whether the exposed pad, negative supply, input polarity, output, and no-connect functions match the selected ordering code.
Is THS4081CD suitable for video applications?
Yes, the THS4081CD is suitable for video applications because it combines 175 MHz small-signal bandwidth with 35 MHz differential video bandwidth at gain 1. According to Texas Instruments, differential-gain variation is 0.1 dB and differential-gain phase is 0.05 degrees under the stated measurement conditions. It can therefore serve as a video buffer or low-level active signal-conditioning stage when its output-loading and stability limits are respected.
What is the power consumption of THS4081CD?
The THS4081CD quiescent current is 3.4 mA per channel. The Texas Instruments product information describes it as an ultralow-power, high-speed voltage-feedback amplifier, making it useful where conventional high-speed amplifiers would consume more supply current. Actual system consumption also depends on the supply voltage, output swing, load current, feedback-network losses, and the selected operating mode.
THS4081CD vs THS4031IDR - which is better for a high-speed amplifier?
Choose the THS4081CD when its 175 MHz voltage-feedback bandwidth, 230 V/us slew rate, and 3.4 mA quiescent current match the design. The THS4031IDR should be selected only after checking its feedback architecture, pin functions, supply range, output-drive behavior, and stability against the specific board. Both use an 8-pin SOIC-class package according to product listings, but package equality alone does not prove pin-to-pin compatibility.
When should I choose THS4081CD over a lower-bandwidth amplifier?
Choose the THS4081CD when signal edges require high small-signal bandwidth or large-signal slew performance beyond a conventional precision amplifier. Its 175 MHz bandwidth, 230 V/us slew rate, and 43 ns settling time to 0.1% support video, communications, buffering, and active-filter stages. A lower-bandwidth device may be preferable only when those high-speed capabilities are unnecessary and lower cost or power is more important.
Is THS4081CD suitable for communications equipment?
Yes, the THS4081CD is identified by Texas Instruments as an ultralow-power, high-speed amplifier intended for communications and video applications. Its 175 MHz bandwidth and 230 V/us slew rate provide useful headroom for high-speed analog signal chains, while 3.4 mA quiescent current supports low-power designs. The exact receiver or transmitter architecture must still satisfy the amplifier's supply, noise, distortion, and output-drive requirements.
What can replace THS4081CD?
THS4081CD can be replaced only by an amplifier with the same 8-pin SOIC footprint, matching pin functions, and compatible electrical behavior. The verified cross-reference material identifies nearby amplifier candidates but does not establish five pin-to-pin, parameter-qualified drop-in replacements. Treat THS4081CDR, THS4081ID, and THS4081IDR as same-family ordering candidates for review, while a cross-brand substitution requires a full pinout, supply, stability, and AC-performance comparison.
Is THS4081CD the same as THS4031IDR?
No, the THS4081CD and THS4031IDR should not be assumed to be interchangeable merely because both are high-speed amplifiers in an 8-pin SOIC. The THS4081CD is specified at 175 MHz bandwidth, 230 V/us slew rate, and 3.4 mA quiescent current, but the cross-reference result does not demonstrate that every pin, feedback arrangement, and operating limit of the THS4031IDR matches. Verify the manufacturer pinout and application conditions before substitution.
Where can I buy THS4081CD online?
Use the Request a Quote form on this page to request THS4081CD availability, current lead time, and a quotation for the 8-pin SOIC ordering code. This page does not publish a static price because quotations and inventory can change. For configuration review, also open the official Texas Instruments ordering-information page for THS4081CD and confirm the package, temperature range, and lifecycle status.
What is the price of THS4081CD?
Request a current THS4081CD quotation through the Request a Quote form on this page. The available listing includes a unit-price reference, but it does not provide a qualifying quantity-break table, so no static price or tier is reproduced here. Buyers should also specify the required quantity and confirm whether reels, cut tape, or another authorized packing format is needed.
What is the lead time for THS4081CD?
The current THS4081CD lead time should be requested through the Request a Quote form on this page. The verified distributor information states that the lead time is to be confirmed, so a fixed delivery period cannot be stated reliably. Include the required quantity, target date, and packing preference in the request so procurement can confirm the appropriate supply plan.

Datos de referencia de ingeniería para THS4081CD — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose THS4081CD when a design requires a single, low-power voltage-feedback amplifier with 175 MHz bandwidth, 230 V/us slew rate, and an 8-pin SOIC footprint in the 0°C to 70°C range. It is well suited to video buffering, communications signal paths, active filtering, and general high-speed analog conditioning. Select THS4081CDR when reel-packed production quantities are preferred while retaining the same core electrical configuration. Consider THS4081ID when the board requires the corresponding industrial-temperature ordering option, after verifying its complete operating limits. THS4081IDR combines that temperature ordering with reel packing. The verified cross-reference search did not identify enough cross-brand, pin-to-pin alternatives with documented parameter matching, so a different manufacturer's amplifier should not be selected solely because it also uses an 8-pin SOIC; verify every pin function and stability condition first.

Comparación con alternativas

Parámetro Este producto THS4081CDR THS4081ID THS4081IDR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SOIC-8 (D) SOIC-8 (D) SOIC-8 (D) SOIC-8 (D)
Amplifier Type Single voltage-feedback operational amplifier Single voltage-feedback operational amplifier Single voltage-feedback operational amplifier Single voltage-feedback operational amplifier
Small-Signal Bandwidth 175 MHz 175 MHz 175 MHz 175 MHz
Slew Rate 230 V/us 230 V/us 230 V/us 230 V/us
Quiescent Current 3.4 mA per channel 3.4 mA per channel 3.4 mA per channel 3.4 mA per channel
Settling Time 43 ns to 0.1% 43 ns to 0.1% 43 ns to 0.1% 43 ns to 0.1%
Output Drive Capability 85 mA typical 85 mA typical 85 mA typical 85 mA typical
Differential Video Bandwidth 35 MHz at gain 1 35 MHz at gain 1 35 MHz at gain 1 35 MHz at gain 1

Diferenciadores clave

  • Combines very high bandwidth with low quiescent current (frente a THS4081CDR)
  • Retains identical core AC performance across ordering variants (frente a THS4081ID)
  • Provides high slew rate and strong output drive in a low-power amplifier (frente a THS4081IDR)

Notas de diseño

Place the input, output, and feedback components close to the THS4081CD, especially when the closed-loop gain is above 1. Keep the inverting-input node physically small because parasitic capacitance in a 175 MHz-capable feedback loop can alter bandwidth and phase margin. Use a continuous ground reference beneath the device where the package footprint permits, and avoid routing sensitive input traces adjacent to the output node.

Decouple the positive and negative supply pins independently with placement optimized for the shortest current loop. The amplifier's specified quiescent current is 3.4 mA per channel, but output current and dynamic power depend on the waveform amplitude, load, and supply voltage. Check output swing, supply headroom, and thermal conditions across the intended signal range rather than treating the quiescent current as total system consumption.

Use a termination and feedback strategy that matches the source impedance and intended closed-loop gain. A 175 MHz bandwidth amplifier can respond to unwanted high-frequency energy and parasitic feedback, so terminate unused inputs according to the manufacturer recommendations and avoid long unterminated cable runs. When driving capacitive loads, use a series resistor close to the output and confirm stability using the actual load and board layout.

Do not assume that every high-speed amplifier in an 8-pin SOIC is pin-to-pin compatible. Confirm the pin functions, supply connections, feedback topology, input offset, noise, distortion, output swing, and stability requirements before replacing THS4081CD. Also distinguish the 0°C to 70°C commercial ordering option from industrial-temperature variants instead of assuming that changing the suffix has no environmental effect.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer product page identifies THS4081CD as an 8-pin SOIC device rated for 0°C to 70°C, but the verified material does not explicitly state its RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.

Búsquedas relacionadas

THS4081CD datasheet THS4081CD pinout THS4081CD datasheet pdf THS4081CD specifications THS4081CD SOIC-8 THS4081CD 175 MHz amplifier THS4081CD 230 V/us slew rate THS4081CD equivalent THS4081CD replacement THS4081CD cross reference THS4081CD vs THS4031IDR Texas Instruments THS4081CD THS4081CD video amplifier THS4081CD price THS4081CD stock

Componentes & términos relacionados

Texas Instruments THS4081CD THS4081 THS4081CDR THS4081ID THS4081IDR THS4031IDR voltage-feedback amplifier operational amplifier analog amplifier signal-conditioning IC semiconductor small-signal bandwidth slew rate quiescent current output drive capability settling time differential video bandwidth SOIC-8 surface-mount package communications equipment video buffering active filter data-converter interface test and measurement
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ