THS4081CD - 175MHz Low-Power Voltage-Feedback Amplifier | TI
部品番号: THS4081CD ✓ 生産中THS4081CD 概要
A voltage-feedback operational amplifier is an analog amplifier that uses negative feedback to control gain, bandwidth, and output impedance. The THS4081 belongs to the broader hierarchy of operational amplifiers, analog amplifiers, signal-conditioning ICs, and semiconductor devices. Unlike power amplifiers designed mainly to drive loudspeakers or high-current loads, this amplifier is intended for low-voltage analog signals and typically operates with external feedback components.
The main performance characteristics include 175 MHz bandwidth, 230 V/us slew rate, and 43 ns settling time to 0.1%. The amplifier also offers 85 mA typical output-drive capability and 35 MHz differential video bandwidth at a gain of 1. Its low 3.4 mA quiescent current makes it suitable for power-conscious equipment while retaining the bandwidth needed for high-speed video, communications, instrumentation, and active-filter applications.
The THS4081 uses a conventional voltage-feedback architecture. Closed-loop bandwidth and gain are established by the external resistor network, while the amplifier's high slew rate helps preserve large-signal behavior and settling performance. The combination of 175 MHz bandwidth and 43 ns settling time is particularly useful in circuits that must process waveforms with short rise and fall times, including video buffering, communications receivers, data-conversion interfaces, and active filtering.
Typical applications include video signal conditioning, communications equipment, test-and-measurement instruments, analog-to-digital converter input interfaces, digital-to-analog converter output interfaces, and low-power high-speed signal buffers. When the amplifier drives a capacitive load, routing, output-current capability, load impedance, and stability should be evaluated together rather than relying on bandwidth alone.
The main design consideration is power-supply implementation. Keep input and output return paths short, place decoupling capacitors close to the supply pins, and use a stable feedback layout that minimizes parasitic capacitance. Because the specified 0°C to 70°C range applies to THS4081CD, designs requiring wider industrial temperature coverage should select the appropriate temperature-grade ordering option after reviewing its datasheet.
This product page combines the manufacturer specifications, ordering information, technical application guidance, and drop-in replacement analysis to support faster component selection and PCB design. Use the manufacturer datasheet and pin-description table for final footprint, pinout, electrical-limit, and layout verification before releasing a production design.
ドロップイン代替品: THS4081CD — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: THS4081CD (同一形状・フットプリント) — 相違点: Operating Temperature, Package, Slew Rate, Small-Signal Bandwidth.
THS4081CDR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
THS4081ID
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →THS4081IDR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
THS4081CD 最大定格&電気的特性
| Amplifier Type | Voltage-feedback operational amplifier |
| Number of Channels | 1 channel |
| Small-Signal Bandwidth | 175 MHz at -3 dB |
| Slew Rate | 230 V/us |
| 静止電流 | 3.4 mA per channel |
| Output Drive Capability | 85 mA typical |
| Settling Time | 43 ns to 0.1% |
| Differential Video Bandwidth | 35 MHz at gain of 1, with 0.1 dB differential gain variation |
| Differential Gain Phase | 0.05 degrees |
| パッケージ | 8-pin SOIC (D), 3.90 mm body width |
| 動作温度 | 0°C to 70°C |
| 実装タイプ | Surface mount |
| Product Description | 175 MHz low-power voltage-feedback amplifier |
| Primary Applications | Communications and video applications |
| Feedback Architecture | Voltage feedback |
THS4081CD ピン構成
| ピン 1 | NC — Not connected |
| ピン 2 | -IN — Inverting input |
| ピン 3 | +IN — Non-inverting input |
| ピン 4 | V- — Negative power-supply connection |
| ピン 5 | NC — Not connected |
| ピン 6 | OUT — Output |
| ピン 7 | V+ — Positive power-supply connection |
| ピン 8 | NC — Not connected |
主な用途
THS4081CD の用途: 6 件s: Video Signal Buffering, Communications Receiver Signal Path, Data Converter Interface, Active Filtering, Test and Measurement Instrumentation, Analog Signal Conditioning.
Video Signal Buffering
The THS4081CD fits video buffering because Texas Instruments specifies 175 MHz small-signal bandwidth and 35 MHz differential video bandwidth at a gain of 1. Its 230 V/us slew rate also supports rapid output transitions when driven into the documented load range. The low 3.4 mA quiescent current can simplify thermal and power budgeting in multi-channel video equipment. Use short PCB return paths, suitable decoupling, and a termination arrangement appropriate to the source and destination impedance.
おすすめ
Communications Receiver Signal Path
For communications receiver front ends, the THS4081CD provides 175 MHz bandwidth and 230 V/us slew rate for conditioning intermediate-frequency or other high-speed analog nodes. Its 3.4 mA quiescent current is useful when multiple amplifier stages consume limited supply power, while the 43 ns settling time supports pulse and waveform conditioning. The designer should select gain and feedback values for the required bandwidth and verify input noise, output swing, and stability against the manufacturer electrical tables.
おすすめ
Data Converter Interface
The THS4081CD can serve as an interface amplifier around data converters when the converter requires a low-noise, high-bandwidth drive or receive stage. Its 175 MHz bandwidth and 85 mA typical output-drive capability provide useful margin for driving sampling networks or isolated converter inputs. The 230 V/us slew rate helps preserve edge information during transitions. Keep the feedback loop compact, isolate capacitive kickback from the converter, and verify settling against the converter's acquisition requirements.
おすすめ
Active Filtering
The THS4081CD is appropriate for high-frequency active-filter stages requiring more bandwidth than conventional precision amplifiers. Its 175 MHz small-signal bandwidth and 230 V/us slew rate allow multiple amplifier functions to operate over a broad frequency range, while 3.4 mA quiescent current controls per-stage consumption. Select resistor and capacitor values against the desired closed-loop response, and check the selected gain and phase margin because high-speed feedback networks can become sensitive to parasitic capacitance.
おすすめ
Test and Measurement Instrumentation
The THS4081CD supports high-speed test and measurement front ends where accurate signal transitions and rapid settling are important. Its 43 ns settling time to 0.1%, 175 MHz bandwidth, and 230 V/us slew rate make it useful for waveform conditioning, trigger shaping, and buffer stages. The single-amplifier SOIC-8 package also supports compact analog boards. For precision amplitude measurement, complete a full error-budget review because offset, noise, and distortion figures must be checked from the manufacturer datasheet.
おすすめ
Analog Signal Conditioning
The THS4081CD can condition low-level analog signals in instrumentation and control systems that require a wider bandwidth than standard op-amp stages. Its 175 MHz bandwidth supports high-speed sensor and control-loop signals, while the 3.4 mA quiescent current benefits compact multi-channel designs. The voltage-feedback topology permits conventional external resistor feedback, but the feedback values must preserve the required signal gain without forcing the amplifier into an unstable or output-limited operating region.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: THS4081CD — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | THS4081CDR | THS4081ID | THS4081IDR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SOIC-8 (D) | SOIC-8 (D) | SOIC-8 (D) | SOIC-8 (D) |
| Amplifier Type | Single voltage-feedback operational amplifier | Single voltage-feedback operational amplifier | Single voltage-feedback operational amplifier | Single voltage-feedback operational amplifier |
| Small-Signal Bandwidth | 175 MHz | 175 MHz | 175 MHz | 175 MHz |
| Slew Rate | 230 V/us | 230 V/us | 230 V/us | 230 V/us |
| Quiescent Current | 3.4 mA per channel | 3.4 mA per channel | 3.4 mA per channel | 3.4 mA per channel |
| Settling Time | 43 ns to 0.1% | 43 ns to 0.1% | 43 ns to 0.1% | 43 ns to 0.1% |
| Output Drive Capability | 85 mA typical | 85 mA typical | 85 mA typical | 85 mA typical |
| Differential Video Bandwidth | 35 MHz at gain 1 | 35 MHz at gain 1 | 35 MHz at gain 1 | 35 MHz at gain 1 |
主な差別化要因
- Combines very high bandwidth with low quiescent current (vs THS4081CDR)
- Retains identical core AC performance across ordering variants (vs THS4081ID)
- Provides high slew rate and strong output drive in a low-power amplifier (vs THS4081IDR)
設計ノート
Place the input, output, and feedback components close to the THS4081CD, especially when the closed-loop gain is above 1. Keep the inverting-input node physically small because parasitic capacitance in a 175 MHz-capable feedback loop can alter bandwidth and phase margin. Use a continuous ground reference beneath the device where the package footprint permits, and avoid routing sensitive input traces adjacent to the output node.
Decouple the positive and negative supply pins independently with placement optimized for the shortest current loop. The amplifier's specified quiescent current is 3.4 mA per channel, but output current and dynamic power depend on the waveform amplitude, load, and supply voltage. Check output swing, supply headroom, and thermal conditions across the intended signal range rather than treating the quiescent current as total system consumption.
Use a termination and feedback strategy that matches the source impedance and intended closed-loop gain. A 175 MHz bandwidth amplifier can respond to unwanted high-frequency energy and parasitic feedback, so terminate unused inputs according to the manufacturer recommendations and avoid long unterminated cable runs. When driving capacitive loads, use a series resistor close to the output and confirm stability using the actual load and board layout.
Do not assume that every high-speed amplifier in an 8-pin SOIC is pin-to-pin compatible. Confirm the pin functions, supply connections, feedback topology, input offset, noise, distortion, output swing, and stability requirements before replacing THS4081CD. Also distinguish the 0°C to 70°C commercial ordering option from industrial-temperature variants instead of assuming that changing the suffix has no environmental effect.
コンプライアンス情報
The manufacturer product page identifies THS4081CD as an 8-pin SOIC device rated for 0°C to 70°C, but the verified material does not explicitly state its RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.