محصولات (44,000+)

INA143UA - High-Speed Precision Difference Amplifier | Texas Instruments
INA143UA

INA143UA - High-Speed Precision Difference Amplifier | Texas Instruments

The Texas Instruments INA143UA is a high-speed precision difference amplifier with a slew rate of 5 V/us, 250 uV offset, selectable gains of 10 or 0.1, and an 8-pin SOIC package. It is designed for instrumentation and signal-conditioning systems that require accurate differential measurement, high common-mode rejection, and fast response. A difference amplifier measures the voltage difference between two input signals while rejecting common-mode voltage. The INA143UA belongs to the instrumentation-amplifier and precision-amplifier hierarchy: it uses an internal differential amplifier to convert a small difference between input voltages into an amplified output. Its selectable gain supports applications where either a large differential signal must be attenuated or a small signal must be amplified without excessive common-mode error. The main performance characteristics include a 5 V/us slew rate, 250 uV offset, and 150 kHz bandwidth. The INA143UA is specified for a single supply up to 36 V or a dual supply of plus or minus 18 V, according to the manufacturer product information. Its 80 dB common-mode rejection helps preserve signal integrity when both input terminals experience large common-mode signals. The INA143UA is suited to current sensing, bridge-sensor interfaces, industrial measurement, audio instrumentation, and precision signal conditioning. Its gain options allow the same device family to serve attenuation, gain-10, and gain-0.1 signal paths. The reference terminal provides a way to establish the output reference point in single-supply systems, while dual-supply operation permits bipolar output around ground. When designing around the INA143UA, verify input and output voltage limits, common-mode range, supply configuration, and stability requirements against the manufacturer datasheet. Keep sensitive input and reference connections short, provide local supply bypassing, and route high-current returns away from the amplifier ground. Input and output filtering should be selected carefully because excessive capacitance can affect bandwidth or stability. This page consolidates the manufacturer product information, package details, verified source links, drop-in alternatives, comparison fields, and practical design guidance for engineers evaluating the INA143UA in precision analog signal chains.

RFQ تماس
INA145UA - Programmable Gain Difference Amplifier | Texas Instruments
INA145UA

INA145UA - Programmable Gain Difference Amplifier | Texas Instruments

The Texas Instruments INA145UA is a programmable-gain difference amplifier with a gain range of 1 V/V to 1000 V/V, 500 kHz bandwidth, 86 dB CMRR, and 570 uA quiescent current in an 8-pin SOIC package. It accepts supply voltages from ±2.25 V to ±18 V and is designed for precision measurement of small differential signals. A difference amplifier is an operational-amplifier circuit that subtracts one input voltage from another and amplifies the resulting differential voltage while rejecting signals common to both inputs. The INA145 belongs to the precision difference-amplifier hierarchy, which includes instrumentation amplifiers and programmable-gain amplifiers used in current sensing, sensor interfaces, and diagnostic equipment. The INA145 integrates a precision operational amplifier with an on-chip resistor network. External resistors connected to its gain-control pins allow gains from 1 V/V to 1000 V/V. Its 500 kHz bandwidth supports higher-frequency measurements than purely static instrumentation amplifiers, while 86 dB common-mode rejection suppresses common-mode interference. The 570 uA quiescent current supports low-power designs, and the specified operating-temperature range is -40°C to +85°C. Electrically, the device is intended for differential signal conditioning where input common-mode range, gain accuracy, output swing, and supply voltage must be considered together. A wide supply range permits operation from low-voltage analog systems to higher-voltage industrial interfaces. Because the gain is set by external resistors, resistor tolerance and temperature coefficient directly influence gain accuracy and common-mode performance. Typical uses include shunt-current measurement in power converters, bridge-sensor signal conditioning, battery and power-system monitoring, medical instrumentation interfaces, and industrial current sensing. The 8-pin SOIC package is also convenient for designs that need an amplifier with a small footprint and conventional surface-mount assembly. Designers should calculate input and output common-mode limits for the selected gain and supply voltage, and should use precision gain resistors with suitable tolerance and temperature stability. Input filtering and careful layout are important when the source impedance is high or the measured signal contains switching noise. The component is available from distributors in stock, but one marketplace identifies the exact MPN as discontinued, so procurement plans should account for lifecycle risk. This product record combines verified manufacturer and distributor information, practical application guidance, lifecycle observations, and drop-in replacement research. It is designed to help engineers evaluate the INA145UA beyond a basic parametric listing while remaining explicit about any specification that requires confirmation from the manufacturer datasheet.

RFQ تماس
INA146UA - 100V/V High-Voltage Difference Amplifier | TI
INA146UA

INA146UA - 100V/V High-Voltage Difference Amplifier | TI

Texas Instruments INA146UA is a precision high-voltage, programmable-gain difference amplifier with gain up to 100 V/V, a 550 kHz bandwidth, and an 8-pin SOIC package. It operates from a single 4.5 V to 36 V supply or from dual ±2.25 V to ±18 V supplies. Its 570 µA quiescent current supports low-power instrumentation systems, while its 5 mV input offset specification supports accurate measurement of small differential signals. A difference amplifier is a voltage-feedback amplifier that amplifies the voltage difference between two inputs while rejecting voltage common to both inputs. The INA146 belongs to the precision difference-amplifier family within instrumentation amplifiers and signal-conditioning ICs. Its differential input architecture supports accurate attenuation of high differential voltages, rejection of high common-mode voltages, and compatibility with common signal-processing voltage levels. Key features include a ±15 V high common-mode voltage range, differential gain up to 100 V/V set by external resistors, and a 570 µA low quiescent current. The input common-mode range extends beyond both supply rails, providing inherent input protection and allowing the amplifier to operate when its inputs exceed the local supply voltages. The 5 mV offset and 550 kHz bandwidth balance precision and response speed. Technically, the INA146 uses external gain-setting resistors, allowing the gain to be programmed according to application requirements. This resistor-programmed architecture makes it suitable for measurement systems in which gain must be adjusted across multiple input ranges. The operating temperature range of −40 °C to +125 °C supports industrial equipment, while the single-circuit 8-SOIC package simplifies PCB layout and replacement. Typical applications include high-side current sensing, precision bridge and transducer excitation, industrial process measurement, battery monitoring, and instrumentation where inputs may exceed the amplifier supply rails. The common-mode rejection capability is especially useful when a small sensor signal is superimposed on a larger system voltage. Designers should verify input and output voltage limits, power dissipation, gain-resistor tolerance, and stability across the intended frequency range. Because the common-mode input range extends beyond the rails, PCB creepage, protection, and grounding remain important even though the device offers inherent input protection. External input protection may still be required for sustained overvoltage conditions. This page combines verified manufacturer and distributor information with a parameter comparison, drop-in alternatives, application guidance, and practical design notes to support faster component selection and implementation.

RFQ تماس
INA146UAG4 - High-Voltage Programmable Gain Difference Amplifier | Texas Instruments
INA146UAG4

INA146UAG4 - High-Voltage Programmable Gain Difference Amplifier | Texas Instruments

The Texas Instruments INA146UAG4 is a high-voltage, programmable-gain difference amplifier with a 550 kHz gain-bandwidth product in an 8-SOIC package. It is designed to accurately attenuate high differential voltages and reject high common-mode voltages when interfacing high-level signals to lower-voltage signal-processing circuits. The device is particularly useful where the input common-mode range extends beyond the supply rails and where input protection against high-voltage signals is required. A difference amplifier is an amplifier topology that responds to the voltage difference between its differential inputs while rejecting signals common to both inputs. This common-mode rejection improves signal integrity in industrial measurement, sensor-interface, and high-voltage feedback systems. The INA146 belongs to the instrumentation-amplifier and operational-amplifier hierarchy, where precision gain control, low distortion, and accurate differential sensing are primary design considerations. Key features include programmable gain, high-voltage input handling, a differential input configuration, and operation from a single supply or dual-supply arrangement. The 550 kHz bandwidth supports applications requiring accurate signal amplification without the bandwidth limits of much slower precision instrumentation amplifiers. The INA146UAG4 is identified in distributor listings as a one-circuit differential amplifier in an 8-SOIC package. The device is used in applications including high-voltage sensor measurement, current-shunt monitoring, industrial process control, data-acquisition systems, and precision analog signal conditioning. Its differential architecture helps reduce errors caused by common-mode noise and ground-potential differences when the measured signal is referenced to a noisy or elevated source. When designing a circuit around the INA146UAG4, verify the absolute maximum differential and common-mode input voltages, supply limits, gain-resistor network, output swing, and stability requirements in the manufacturer datasheet. Place the gain-setting network and input components close to the device, and use careful routing to minimize parasitic capacitance and noise pickup around the high-impedance amplifier inputs.

RFQ تماس
INA148UA - ±200V Differential Amplifier | Texas Instruments
INA148UA

INA148UA - ±200V Differential Amplifier | Texas Instruments

The Texas Instruments INA148UA is a precision, low-power, unity-gain difference amplifier with a ±200 V common-mode voltage range, 100 kHz bandwidth, and 1 V/µs slew rate in an 8-pin SOIC package. It is designed to measure small voltage differences superimposed on high-voltage industrial or automotive signals without requiring the inputs to remain near ground. A difference amplifier is an analog signal-conditioning IC that subtracts two input voltages and amplifies the resulting differential signal. The INA148 belongs to the instrumentation-amplifier application class, uses a monolithic precision bipolar operational amplifier, and incorporates a thin-film resistor network. Its internal unity-gain architecture gives it a gain of one, so the output represents the difference between the two inputs while rejecting voltage shared by both. Key features include a ±200 V common-mode input range, 100 kHz bandwidth, 1 V/µs slew rate, 5 mV input offset voltage, and a minimum common-mode rejection ratio of 70 dB. The electrical operating range is 2.7 V to 36 V, supporting both low-voltage signal conditioning and conventional industrial supply systems. The listed operating-temperature range extends from −55 °C to +125 °C. The high common-mode capability allows small sensor or shunt signals to be measured when both input nodes are riding on a substantially larger voltage. The thin-film network supports stable precision matching, while the bipolar amplifier and unity-gain configuration provide a straightforward implementation for high-side current sensing, industrial measurement, battery monitoring, and grounded signal acquisition. The 100 kHz bandwidth is appropriate for relatively slow sensor and control signals rather than wideband waveform systems. Typical uses include motor and solenoid current feedback, power-converter telemetry, industrial process monitoring, automotive battery sensing, and measurement of small voltages across high-side shunt resistors. The INA148UA is particularly useful when the signal of interest is small but its common-mode voltage is large, and when the system needs an output referenced to a low-voltage analog or mixed-signal domain. Designers should verify input and output voltage limits, external input protection, supply bypass capacitance, and the common-mode range across temperature before applying the device to a new high-voltage design. Differential input filtering and careful routing are also important when long sensor leads or switching power stages are present. The INA148UA does not provide isolation, so its input and supply ratings must be satisfied by the surrounding system. This product page combines verified manufacturer and distributor information with application-oriented engineering guidance, package details, pricing context, and a replacement-oriented comparison. It is intended to help engineers determine whether the INA148UA fits a high-common-mode measurement design and to identify the limitations of any proposed substitute.

RFQ تماس
INA149AID - ±275V Difference Amplifier | Texas Instruments
INA149AID

INA149AID - ±275V Difference Amplifier | Texas Instruments

The Texas Instruments INA149AID is a precision unity-gain differential amplifier with a ±275 V input common-mode voltage range, supplied in an 8-pin SOIC package. It is designed to measure small differential voltages while rejecting large common-mode signals, and its monolithic construction combines a precision operational amplifier with an integrated thin-film resistor network. The device operates from single or dual supplies totaling up to 36 V, with the verified power configuration extending to ±18 V, and is specified over an industrial temperature range of -40°C to +125°C. A high common-mode difference amplifier is an instrumentation amplifier that preserves a small voltage difference between two inputs even when both inputs are elevated far beyond the amplifier's supply rails. This capability is essential in power-system monitoring, motor-control systems, test equipment, and industrial measurement circuits where a useful sensor signal may sit on top of a substantially larger voltage. The INA149AID sits within the hierarchy of difference amplifier, instrumentation amplifier, analog signal-conditioning IC, and power-management measurement component. The main differentiating specifications are the ±275 V common-mode range, unity differential gain, and a verified minimum CMRR of 90 dB under a +125°C DC condition. Common-mode rejection is important because unwanted voltage shared by both inputs should not appear at the output as differential error. The integrated thin-film resistor network provides a defined unity-gain relationship, simplifying circuit design where external gain-setting resistors would otherwise be required. Internally, the INA149 is a single monolithic device combining a precision op amp with the resistor network. Its high-voltage input structure allows measurement of millivolt-level differential signals in the presence of very large common-mode voltages. That architecture supports direct sensing without an external high-voltage instrumentation front end. The operating range of -40°C to +125°C supports use across industrial environments where temperature variation and long operating lifetimes are important design constraints. Typical applications include power-rail and inverter monitoring, motor-drive feedback, battery-management measurement, laboratory instrumentation, and high-side sensing in industrial control systems. In each case, the central design trade-off is the need to preserve differential accuracy while controlling errors caused by common-mode voltage, input offset, bandwidth, and supply performance. System designers should also account for the amplifier's power dissipation and the limitations of its package when operating near the upper temperature limit. Place the INA149AID close to the sensing nodes and maintain short, guarded differential traces to minimize pickup from adjacent switching circuits. A solid ground-plane layout, careful bypassing of the supply pins, and isolation from high-current return paths help preserve measurement quality. Because the exact signal bandwidth and input-offset limits depend on the complete INA149 grade and operating conditions, use the manufacturer datasheet's full electrical tables when sizing filters and setting measurement-error budgets. This page combines the verified INA149AID specifications, same-footprint alternatives, application guidance, comparison parameters, and practical design notes into an engineering-focused overview. It is intended to help buyers identify the correct amplifier family, confirm packaging, and plan the mechanical, thermal, and signal-integrity requirements of a high common-mode measurement circuit.

RFQ تماس
INA149AIDR - ±275V Difference Amplifier | Texas Instruments (Tape & Reel)
INA149AIDR

INA149AIDR - ±275V Difference Amplifier | Texas Instruments (Tape & Reel)

The Texas Instruments INA149AIDR is a precision unity-gain differential amplifier with a ±275 V input common-mode voltage range, supplied in an 8-pin SOIC package. It is designed to measure small differential voltages while rejecting large common-mode signals, and its monolithic construction combines a precision operational amplifier with an integrated thin-film resistor network. The device operates from single or dual supplies totaling up to 36 V, with the verified power configuration extending to ±18 V, and is specified over an industrial temperature range of -40°C to +125°C. A high common-mode difference amplifier is an instrumentation amplifier that preserves a small voltage difference between two inputs even when both inputs are elevated far beyond the amplifier's supply rails. This capability is essential in power-system monitoring, motor-control systems, test equipment, and industrial measurement circuits where a useful sensor signal may sit on top of a substantially larger voltage. The INA149AIDR sits within the hierarchy of difference amplifier, instrumentation amplifier, analog signal-conditioning IC, and power-management measurement component. The main differentiating specifications are the ±275 V common-mode range, unity differential gain, and a verified minimum CMRR of 90 dB under a +125°C DC condition. Common-mode rejection is important because unwanted voltage shared by both inputs should not appear at the output as differential error. The integrated thin-film resistor network provides a defined unity-gain relationship, simplifying circuit design where external gain-setting resistors would otherwise be required. Internally, the INA149 is a single monolithic device combining a precision op amp with the resistor network. Its high-voltage input structure allows measurement of millivolt-level differential signals in the presence of very large common-mode voltages. That architecture supports direct sensing without an external high-voltage instrumentation front end. The operating range of -40°C to +125°C supports use across industrial environments where temperature variation and long operating lifetimes are important design constraints. Typical applications include power-rail and inverter monitoring, motor-drive feedback, battery-management measurement, laboratory instrumentation, and high-side sensing in industrial control systems. In each case, the central design trade-off is the need to preserve differential accuracy while controlling errors caused by common-mode voltage, input offset, bandwidth, and supply performance. System designers should also account for the amplifier's power dissipation and the limitations of its package when operating near the upper temperature limit. Place the INA149AIDR close to the sensing nodes and maintain short, guarded differential traces to minimize pickup from adjacent switching circuits. A solid ground-plane layout, careful bypassing of the supply pins, and isolation from high-current return paths help preserve measurement quality. Because the exact signal bandwidth and input-offset limits depend on the complete INA149 grade and operating conditions, use the manufacturer datasheet's full electrical tables when sizing filters and setting measurement-error budgets. This page combines the verified INA149AIDR specifications, same-footprint alternatives, application guidance, comparison parameters, and practical design notes into an engineering-focused overview. It is intended to help buyers identify the correct amplifier family, confirm packaging, and plan the mechanical, thermal, and signal-integrity requirements of a high common-mode measurement circuit.

RFQ تماس
INA149N - ±275V High Common-Mode Difference Amplifier | TI
INA149N

INA149N - ±275V High Common-Mode Difference Amplifier | TI

The Texas Instruments INA149N is a precision unity-gain difference amplifier with a very high input common-mode voltage range of up to ±275 V, housed in an 8-pin SOIC package and specified over the extended industrial temperature range of -40C to +125C. A difference amplifier is a type of analog signal-conditioning amplifier that measures only the voltage difference between two input nodes while rejecting any voltage common to both. Within the signal-chain hierarchy, it sits between a raw sensor or power-rail node and an ADC, providing level shifting and common-mode rejection. The difference amplifier category belongs to the broader family of instrumentation amplifiers and amplifier ICs in precision analog front ends. The INA149 is a single, monolithic device consisting of a precision op amp and an integrated, laser-trimmed thin-film resistor network. This integration is the key differentiator: the resistor matching on-chip yields a CMRR and gain accuracy that discrete resistor-op-amp solutions cannot economically match. According to the TI datasheet, the part accurately measures small differential voltages in the presence of common-mode signals up to ±275 V, and its inputs are protected from momentary voltage surges, which matters when probing motor drives, inverters, and industrial power buses. Architecturally, the thin-film network divides the high common-mode input down into the operating range of the internal precision op amp, allowing safe measurement of shunt voltages and bus voltages that sit hundreds of volts above or below the amplifier supply rails. The unity-gain configuration means the output directly reproduces the differential input, simplifying scaling math in firmware. Typical applications include high-side and low-side current sensing in motor drives, DC bus voltage monitoring in industrial inverters, battery-management systems, and data-acquisition front ends where measurement nodes must swing far beyond the ADC range. Design-wise, ensure the reference pin is driven from a low-impedance source, since reference-pin impedance directly degrades CMRR. Layout symmetry of the resistor network inputs preserves accuracy at high common-mode. This page synthesizes verified distributor data, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet alone.

RFQ تماس
INA154U - 3MHz High-Speed Difference Amplifier | Texas Instruments
INA154U

INA154U - 3MHz High-Speed Difference Amplifier | Texas Instruments

The Texas Instruments INA154U is a high-speed, precision difference amplifier with a fixed gain of 1, 3 MHz bandwidth, and an 8-pin SOIC package. It is designed for low-cost applications requiring accurate subtraction of two input voltages. Verified manufacturer data identifies the device as a single-circuit differential amplifier specified for operation from -40°C to +85°C. A difference amplifier is a specialized operational-amplifier circuit that subtracts one input voltage from another while rejecting common-mode voltage. In signal-chain terms, the INA154U belongs to the instrumentation-amplifier and differential-input amplifier hierarchy: differential amplifier -> precision analog amplifier -> analog signal-conditioning IC -> semiconductor. Its integrated precision resistor network provides the fixed difference function without requiring four external matched resistors. Verified features include a maximum input offset voltage of ±750 µV, maximum offset drift of ±2 µV/°C, maximum gain error of ±0.05%, and wide bandwidth of 3 MHz. These parameters make the device suitable where differential signal extraction, bridge measurement, current measurement, or sensing of small voltage differences is required. The manufacturer describes the amplifier as high-speed and precision, while the verified search results identify an 8-SOIC package and one amplifier circuit per device. The INA154U is intended for low-cost designs rather than being described as an ultra-low-noise or high-voltage instrumentation amplifier. Its performance should be evaluated against the actual signal amplitude, source impedance, common-mode range, supply voltage, bandwidth, and required accuracy. The reference pin and input common-mode limits are important when selecting external protection, filtering, and bias circuitry. The verified manufacturer datasheet is the authoritative source for electrical limits and pin functions. Typical uses include differential sensor interfaces, balanced audio and communications signal paths, bridge amplifiers, ADC input conditioning, and precision current-shunt measurements. In a typical application, the two inputs are connected to the sensed differential pair and the output presents the scaled difference. Input and output filtering can be added to control bandwidth, suppress switching noise, and protect the amplifier from transients. When laying out the circuit, keep the differential input traces short and matched, connect the reference pin to a low-impedance bias reference when required, and place input filtering close to the amplifier pins. The integrated resistor network's tolerance and temperature drift should be included in the system error budget. This page combines verified manufacturer specifications, source traceability, application guidance, and replacement constraints for practical design review.

RFQ تماس
INA154UA - 3.1MHz Precision Difference Amplifier | Texas Instruments
INA154UA

INA154UA - 3.1MHz Precision Difference Amplifier | Texas Instruments

Texas Instruments INA154UA is a high-speed, precision difference amplifier with a fixed gain of 1 V/V, 3.1 MHz bandwidth, and 14 V/µs slew rate. The device is supplied in an 8-pin SOIC package and is specified for operation from -40°C to +85°C. It is designed for measuring small differential signals in the presence of larger common-mode voltages. A difference amplifier is an amplifier type that subtracts two input voltages and amplifies the resulting differential signal. The INA154 integrates a precision operational amplifier with a laser-trimmed resistor network, implementing the differential function without requiring an external precision resistor network. It belongs to the broader instrumentation-amplifier and differential-amplifier category within analog signal-chain integrated circuits. Key features include a fixed gain of 1 V/V, maximum input offset voltage of ±750 µV, maximum offset drift of ±2 µV/°C, maximum gain error of ±0.05%, and wide bandwidth of approximately 3 MHz. The device is intended for low-cost, precision differential signal conditioning where the input signal is small relative to the common-mode voltage. The INA154 combines an internal precision amplifier with an integrated, laser-trimmed resistor network. Its high-speed architecture supports signals extending to megahertz frequencies, while the fixed unity gain simplifies system design. Common-mode rejection is valuable in sensor interfaces, industrial measurement systems, and instrumentation applications where unwanted common-mode noise could otherwise obscure the desired differential signal. Typical applications include current sensing, sensor signal conditioning, bridge amplifier inputs, industrial process measurement, and differential communication interfaces. The 8-pin SOIC package makes the device suitable for compact analog boards, provided the designer follows the manufacturer’s recommended input network, supply bypassing, and grounding guidance. The primary design consideration is common-mode voltage and input range. The amplifier’s differential output responds to the difference between the two inputs, but the applied voltages must remain within the device’s permitted operating and common-mode limits. Decoupling capacitors should be placed close to the supply pins, and sensitive analog routing should minimize differential pickup between the input traces. This page consolidates the verified manufacturer and distributor information, distinguishes the fixed-gain INA154UA from general-purpose op-amp alternatives, and highlights package, temperature, offset, bandwidth, and sourcing details useful during component selection.

RFQ تماس
INA155U - 5.5V 550kHz CMOS INA | Texas Instruments
INA155U

INA155U - 5.5V 550kHz CMOS INA | Texas Instruments

The Texas Instruments INA155U is a single-supply, rail-to-rail-output CMOS instrumentation amplifier with a 5.5 V maximum supply, 550 kHz bandwidth, and 1 mV offset specification, housed in an 8-pin SOIC package. It is designed for low-voltage sensor and measurement circuits where a differential input must be amplified accurately while operating from one supply. The rail-to-rail output architecture supports signal chains that operate close to the positive supply rail, while the CMOS implementation targets low-power analog signal conditioning. An instrumentation amplifier is a specialized analog IC that amplifies the difference between two input signals while rejecting common-mode noise. INA155U belongs to the broader hierarchy of analog signal-conditioning devices: instrumentation amplifier, differential amplifier, analog amplifier, and semiconductor. This device is particularly useful when a sensor output is small, noisy, or referenced to a changing common-mode voltage and the next stage requires a larger single-ended signal. The manufacturer identifies the INA155 family as a 5.5 V single-supply, 550 kHz, rail-to-rail-output CMOS instrumentation amplifier. The verified distributor data identifies INA155U as a one-circuit, rail-to-rail-output device in an 8-pin SOIC package. The 550 kHz bandwidth makes it appropriate for signal paths that require response beyond static precision measurements, provided the application does not require high-frequency instrumentation-amplifier performance. The INA155U is intended for low-voltage sensor interfaces, portable measurement systems, industrial signal conditioning, and analog-to-digital converter front ends. Its rail-to-rail output can simplify designs using a 3.3 V or 5 V supply because the output can swing close to the upper rail under suitable load conditions. The exact input common-mode range, gain settings, output swing, noise, and current specifications were not included in the verified data and must be checked in the manufacturer datasheet before final design release. For PCB implementation, use a low-noise ground reference, place input and feedback components close to the device, and keep sensitive differential traces short and symmetric. Decoupling capacitors should be placed at the supply pins according to the manufacturer recommendations. Verify the complete signal chain against the datasheet limits, especially when the source impedance, gain, output load, supply voltage, or common-mode input level differs from the nominal application conditions. This page combines the verified INA155U product identity and distributor links with structured application, comparison, and design guidance. It does not infer electrical values that were not explicitly supplied in the retrieved data, and it identifies missing parameters for engineering confirmation.

RFQ تماس
INA155UA - 550 kHz Single-Supply CMOS Instrumentation Amp | TI
INA155UA

INA155UA - 550 kHz Single-Supply CMOS Instrumentation Amp | TI

The Texas Instruments INA155UA is a single-supply, rail-to-rail-output CMOS instrumentation amplifier designed for low-voltage signal conditioning. It operates from a 2.5 V to 6 V supply, provides 550 kHz bandwidth, has a 1 mV input offset voltage, and is available in an 8-pin SOIC package. The device is intended for applications requiring differential input measurement, current sensing, sensor interfaces, and low-voltage analog signal conditioning. An instrumentation amplifier is a differential-input analog amplifier that combines high input impedance, accurate gain setting, and common-mode rejection into one integrated device. The INA155UA belongs to the instrumentation amplifier category, which is part of the broader amplifier IC and analog signal-processing hierarchy. Its rail-to-rail output allows the output to approach the supply rails, while its CMOS construction supports low-voltage operation and compact analog designs. The INA155UA provides adjustable gain through external resistors, with the manufacturer describing the device as a 1 mV-offset, 550 kHz rail-to-rail CMOS instrumentation amplifier. The 550 kHz bandwidth is particularly useful for signals that require more bandwidth than a precision-only instrumentation amplifier but do not require the bandwidth of a high-speed differential ADC frontend. The 6.5 V/us slew rate listed in distributor search data helps characterize its ability to respond to changing input conditions. The device is suited to low-voltage sensor conditioning, including bridge and strain-gauge signals, because its differential input architecture rejects common-mode noise when the common-mode voltage remains within the specified input range. It can also be used with current-shunt measurements, where the instrumentation amplifier converts a small differential voltage across a shunt into a larger single-ended signal. The rail-to-rail output is useful in systems where the available output headroom is limited. Typical applications include industrial process measurement, portable instrumentation, battery-powered sensor interfaces, current monitoring, and low-voltage data acquisition. When designing around the INA155UA, confirm the complete input common-mode range, output swing, gain resistor values, supply decoupling, and operating temperature limits against the manufacturer datasheet. Pay particular attention to the distinction between rail-to-rail output operation and rail-to-rail input operation, because only the output characteristic is explicitly identified in the provided verified data. This product record combines verified manufacturer and distributor information, package details, pricing references, replacement guidance, and application-oriented engineering notes. The provided search results confirm the INA155UA's 5.5 V single-supply classification, 550 kHz bandwidth, 1 mV offset specification, rail-to-rail output, CMOS construction, 2.5 V to 6 V supply range, and 8-pin SOIC package.

RFQ تماس
INA155UG4 - 550 kHz R-R CMOS INA | Texas Instruments
INA155UG4

INA155UG4 - 550 kHz R-R CMOS INA | Texas Instruments

The Texas Instruments INA155UG4 is a single-supply, rail-to-rail-output CMOS instrumentation amplifier with 200 uV input offset voltage, 6.5 V/ms slew rate, and 550 kHz bandwidth, packaged in an 8-pin SOIC. Designed for low-voltage signal acquisition, it amplifies differential sensor signals while operating from a 2.7 V to 5.5 V supply. An instrumentation amplifier is a precision analog amplifier category designed for differential measurement systems. Its internal topology provides input common-mode rejection and gain-setting functions in a compact package. The INA155 belongs to the broader CMOS analog amplifier, signal-conditioning IC, and power-management-aware semiconductor hierarchy, making it suitable for sensor interfaces, current measurement, and compact data-acquisition systems. The INA155UG4 provides rail-to-rail output swing, allowing the amplified signal to approach the supply limits. Its 550 kHz bandwidth supports moderate-frequency measurement signals, while the 6.5 V/ms slew rate helps preserve large-signal response. The low 200 uV input offset specification is important when measuring small differential voltages because offset error directly shifts the amplified result. A single 2.7 V to 5.5 V supply simplifies integration with low-voltage sensors and mixed-signal systems. The CMOS implementation is optimized for low-voltage, single-supply operation. Rail-to-rail output operation improves usable output range without requiring a bipolar supply, although input and output headroom still depends on gain, load, supply voltage, and operating conditions. The INA155 family is intended for general-purpose differential amplification and for driving sampling analog-to-digital converters when signal bandwidth and settling behavior satisfy the converter requirements. Typical uses include bridge-transducer interfaces, low-voltage current sensing, portable instrumentation, industrial measurement, medical monitoring, and general sensor conditioning. In these applications, the INA155UG4 converts a small differential input into a larger single-ended voltage suitable for an ADC, comparator, or downstream measurement circuit. Its 550 kHz bandwidth is appropriate for sensors whose useful signal content remains well below that frequency. A key design consideration is to verify the selected gain against the device’s gain bandwidth and output-swing limits. Keep the input and return paths short, use a clean low-noise supply, and connect the reference or return input to the appropriate analog-ground point. Check the external gain-setting implementation against the manufacturer’s recommended resistance and layout guidance before sampling fast or low-amplitude signals.

RFQ تماس
INA157U - 3MHz Precision Difference Amplifier | Texas Instruments
INA157U

INA157U - 3MHz Precision Difference Amplifier | Texas Instruments

The Texas Instruments INA157U is a high-speed, precision difference amplifier with a 3 MHz bandwidth, ±500 µV maximum offset voltage, ±2 µV/°C maximum offset drift, and ±0.05% maximum gain error. The device is supplied in an 8-pin SOIC surface-mount package and is specified for operation from -40°C to +85°C. A difference amplifier is a specialized amplifier IC that measures the voltage between two input terminals while rejecting signals common to both inputs. Positioned within the hierarchy of difference amplifier, instrumentation amplifier, operational amplifier, and analog signal-conditioning IC, it is used where accurate subtraction, current-sense measurement, or rejection of common-mode interference is required. The INA157U integrates a precision operational amplifier with a laser-trimmed resistor network. According to the Texas Instruments manufacturer datasheet, the internal resistors are ratio matched, although their absolute values may vary by ±20%. This ratio matching supports accurate gain and common-mode rejection. The listed low offset voltage, low thermal drift, low gain error, and 3 MHz bandwidth make the device useful where both dc accuracy and signal bandwidth matter. Typical applications include differential voltage measurement, current-shunt amplification, industrial sensor interfaces, bridge-sensor signal conditioning, and communication-circuit gain stages. A compact SOIC package supports conventional surface-mount assembly, while the extended industrial temperature range supports equipment operating across temperature extremes. The 3 MHz bandwidth also allows the amplifier to process signals beyond low-frequency precision-only applications. Designers should preserve adequate input and output voltage headroom, verify common-mode and output-swing limits against their actual signal, and route sensitive differential inputs using short, symmetric paths. Because the internal resistor network contributes noise and absolute resistance tolerance, board-level calibration should use ratio accuracy rather than assuming a nominal resistor value. This page combines the verified manufacturer specifications, distributor availability references, practical application guidance, and drop-in comparison information for engineers evaluating the INA157U.

RFQ تماس
INA157UA - 4MHz Difference Amplifier | Texas Instruments
INA157UA

INA157UA - 4MHz Difference Amplifier | Texas Instruments

Texas Instruments INA157UA is a high-speed, precision difference amplifier with 4 MHz bandwidth, one amplifier channel, and an 8-pin SOIC package. The device integrates a precision operational amplifier with a laser-trimmed resistor network, providing a fixed differential gain of 1 and rejecting common-mode signals without requiring an external matched resistor divider. A difference amplifier is a specialized instrumentation amplifier building block that measures the voltage difference between two inputs rather than amplifying either input relative to ground. In the broader semiconductor hierarchy, the INA157UA belongs to the amplifier IC family, specifically the difference-amplifier and instrumentation-signal-chain categories used for current sensing, bridge sensing, and measurement systems. Key features include a 4 MHz bandwidth, low maximum offset voltage of ±500 µV, low offset drift of ±2 µV/°C, and low maximum gain error of ±0.05%. The integrated resistor network eliminates the component-matching and resistor-ratio errors normally associated with discrete difference amplifiers. The INA157UA is available in the 8-pin SOIC surface-mount package. The internal architecture combines a precision operational amplifier with a precision, laser-trimmed resistor network. Its differential input arrangement supports accurate measurement of small voltage differences in the presence of substantially larger common-mode voltages. The 4 MHz bandwidth makes the device suitable for signal chains that require faster response than a conventional precision instrumentation amplifier while retaining integrated gain accuracy. Typical applications include low-side and high-side current sensing, bridge and strain-gauge signal conditioning, industrial process measurement, and differential sensor interfaces. In these systems, the INA157UA converts a small differential sensor voltage into a single-ended output while suppressing common-mode noise. It is particularly useful where an eight-pin surface-mount footprint and integrated resistor network simplify board design. When designing with the INA157UA, verify the input and output voltage limits, supply headroom, common-mode range, and operating-temperature grade against the manufacturer datasheet. Input and output layout should minimize parasitic capacitance and feedback-loop area, while a clean analog ground return is important for precision measurement. Bypass placement and trace routing should follow the datasheet recommendations rather than generic high-frequency layouts. This page combines verified manufacturer and distributor information, same-package substitution analysis, practical design guidance, and specification-by-specification comparison. It is intended to help engineers identify the INA157UA, evaluate genuine drop-in alternatives, and implement the device correctly in precision analog signal chains.

RFQ تماس
INA163UA - Low-Noise Instrumentation Amplifier | Texas Instruments
INA163UA

INA163UA - Low-Noise Instrumentation Amplifier | Texas Instruments

Texas Instruments INA163UA is a monolithic, low-noise, low-distortion instrumentation amplifier in a 14-pin SOIC package. The device uses current-feedback circuitry to provide wide bandwidth and strong dynamic response across its gain range. Its instrumentation-amplifier architecture supports differential input measurement while preserving low-noise and low-distortion performance for precision signal conditioning. The INA163UA is designed for low-level audio signals, including balanced low-impedance microphones, as well as industrial, instrumentation, and medical applications where signal integrity and measurement accuracy are important. An instrumentation amplifier is a specialized analog amplifier that provides differential gain, high input impedance, and accurate common-mode rejection. The INA163UA combines these functions in a single IC, simplifying signal-chain design when a sensor or balanced source must be amplified before measurement, conversion, or audio processing. Its current-feedback approach differentiates it from voltage-feedback amplifiers and is particularly useful where bandwidth and dynamic response need to remain strong over multiple gain settings. The principal benefit of the INA163UA is low-noise signal conditioning in demanding analog systems. Low noise preserves small-signal information and can improve the usable dynamic range of downstream converters, audio equipment, and laboratory instruments. Low distortion helps maintain signal integrity when the input contains high-quality content and the amplifier operates at practical signal levels. The device is also suitable for applications that require a compact solution rather than a discrete three-amplifier instrumentation-amplifier implementation. Typical uses include balanced microphone preamplification, audio signal conditioning, industrial measurement systems, medical instrumentation, and low-level sensor interfaces. The 14-pin SOIC package supports conventional surface-mount assembly and provides a practical upgrade path when a design requires low noise and low distortion in a compact analog IC. Designers should use the manufacturer datasheet for the complete electrical limits, gain configuration, pin assignments, recommended operating conditions, and application circuit. PCB layout should keep input and feedback connections short, maintain a clean ground reference, and place compensation or filtering components close to their associated pins. This page combines manufacturer information, distributor references, package details, practical design guidance, and drop-in alternative evaluation for faster component selection.

RFQ تماس
INA166UA - G=2000 Low-Noise Instrumentation Amplifier | TI
INA166UA

INA166UA - G=2000 Low-Noise Instrumentation Amplifier | TI

The Texas Instruments INA166UA is a single-circuit, internally set G=2000 instrumentation amplifier with a 450 kHz -3 dB bandwidth, 15 V/µs slew rate, 50 µV input offset voltage, and 2.5 µA input bias current in a 14-pin SOIC (D) package. The device uses current-feedback circuitry to provide low noise, low distortion, wide bandwidth, and strong dynamic response when amplifying very small differential signals. An instrumentation amplifier is a differential-input amplifier optimized for precision signal conditioning. It combines high input impedance, accurate differential gain, and common-mode rejection into one device, reducing the need for several precision operational amplifiers and matched resistors. The INA166 belongs to the broader amplifier IC hierarchy and is commonly used where sensors and transducers produce small outputs that must be measured accurately in the presence of larger common-mode voltages. The INA166's fixed gain of 2000 increases a small differential input by a factor of 2000, making it useful for low-level microphone, hydrophone, industrial transducer, and medical-instrumentation signals. Its 450 kHz -3 dB bandwidth provides substantially more bandwidth than a traditional low-noise precision amplifier with a narrow frequency response. The 15 V/µs slew rate supports rapid signal transitions, while the 2.5 µA input bias current helps preserve accuracy with high-impedance sources. The current-feedback architecture differentiates the INA166 from voltage-feedback instrumentation amplifiers that depend on a closed-loop gain resistor. Because its gain is internally set, the circuit does not require an external gain-setting resistor, reducing component count and avoiding sensitivity to external gain-resistor tolerance. The manufacturer describes the device as a very low-noise, low-distortion monolithic instrumentation amplifier intended for low-level signals. Typical uses include precision microphone preamplification, hydrophone signal chains, industrial process-control inputs, bridge-sensor interfaces, and medical monitoring equipment. In each case, the differential input can reject common-mode interference while the fixed high gain converts a millivolt-level sensor output into a range suitable for an ADC or subsequent signal-processing stage. Designers should verify the signal bandwidth and output swing against the datasheet limits, place input and feedback connections for low noise, and provide stable bypassing on the supply pins. The wide bandwidth and slew rate can excite output-stage distortion if the output signal approaches the available output-voltage range, so the gain and sensor bandwidth should be considered together rather than independently. This product record combines the verified manufacturer and distributor data for the INA166UA with lifecycle information, pricing context, package details, application guidance, and a conservative replacement analysis. It distinguishes verified drop-in candidates from related ordering variants so engineers can assess PCB and supply-chain decisions without confusing a different gain option with an exact functional replacement.

RFQ تماس
INA181A1QDBVRQ1 - 26V AEC-Q100 Bidirectional Current Sense Amp | TI
INA181A1QDBVRQ1

INA181A1QDBVRQ1 - 26V AEC-Q100 Bidirectional Current Sense Amp | TI

The Texas Instruments INA181A1QDBVRQ1 is an AEC-Q100-qualified, 26V bidirectional, low- and high-side voltage-output current-sense amplifier with a fixed gain of 20 V/V, housed in a 6-pin SOT-23 (DBV) package. It operates across a -0.2V to 26V common-mode input range, supports a 350 kHz bandwidth, and draws 195 uA typical quiescent current. The A1 gain variant delivers 20 V/V output scaling, making it suitable for low-current shunt monitoring in tight PCB areas. A current-sense amplifier is an analog IC that measures voltage drop across a shunt resistor placed in series with a load, producing a ground-referenced output proportional to load current. Current-sense amplifiers sit in the broader hierarchy of signal-chain ICs -> amplifiers -> instrumentation amplifiers -> current-sense amplifiers, and they are essential building blocks of any power-management system that requires accurate real-time current telemetry for protection, regulation, or efficiency optimization. Key features include bidirectional sensing (single part supports both charge and discharge current on battery rails), 350 kHz bandwidth for fast transient response, rail-to-rail output swing for maximum dynamic range with low supply headroom, and AEC-Q100 Grade 1 qualification with an operating temperature range of -40C to +125C for under-hood automotive deployment. The device integrates a precision thin-film gain resistor network that eliminates external gain-setting components. Internally, the INA181A1QDBVRQ1 uses a chopped-input bipolar front-end with delta-sigma offset correction, achieving 100 uV maximum offset and 1 uV/C typical drift. This architecture rejects 50/60 Hz line-coupled noise and PSRR-induced errors from upstream switching converters, enabling accurate measurement on noisy automotive buses such as 12V battery feeds. Typical applications include automotive body electronics (lighting load monitoring, seat heater current sense), USB Type-C VBUS current monitoring, motor drive H-bridge phase current feedback, battery management systems for e-bikes and power tools, and solar MPPT input-side current sensing. The wide common-mode range handles inductive load transients and load-dump pulses found in 12V/24V automotive systems. When designing with this device, ensure the input pins remain within the absolute maximum ratings even during transients; a small differential RC filter between the shunt and the IN+/IN- pins limits input-stage overdrive. Use a 4-layer PCB with a low-impedance ground pour to avoid ground bounce corrupting the high-side measurement. This page synthesizes distributor pricing, drop-in SOT-23-6 alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ تماس
INA186A3IDCKR - 40V Bidirectional Current Sense Amp | TI
INA186A3IDCKR

INA186A3IDCKR - 40V Bidirectional Current Sense Amp | TI

The Texas Instruments INA186A3IDCKR is a 40 V, bidirectional, high-precision, low-power, zero-drift current-sense amplifier in a 6-pin SC-70 (DCK) package. The A3 gain variant sets the fixed internal gain to 100 V/V, and the device accepts common-mode voltages from -0.2 V to +40 V independently of the supply rail. A current-sense amplifier (CSA, also called a current-shunt monitor) is an analog IC that measures the small differential voltage developed across a shunt resistor in series with a load, and converts it to a ground-referenced output voltage proportional to load current. CSAs sit in the signal-chain hierarchy: shunt resistor -> current-sense amplifier -> ADC / MCU / comparator, and they are essential building blocks in the power-management sub-system for accurate telemetry and protection. Key features include a low offset voltage enabled by the zero-drift chopper architecture, picoamp-level input bias current that supports large shunt values for microamp measurements, a low quiescent current (typically tens of microamps) suitable for always-on battery monitoring, an integrated ENABLE pin for power gating, and rail-to-rail output swing for full-scale ADC input utilization. The A3 fixed gain of 100 V/V provides 20 mV/V sensitivity. The architecture combines a precision chopper-stabilized input stage with an internal gain-setting resistor network, eliminating the external gain resistors required by discrete difference-amplifier implementations. The high common-mode rejection and picoamp bias allow designers to use larger sense resistors for better signal-to-noise without measurable loading error. Typical applications include battery-cell monitoring in battery management systems (BMS), USB-C current advertisement and overcurrent protection, motor-phase current sensing in BLDC drivers, solar MPPT input-current telemetry, and precision 24 V industrial-sensor rails. Design tip: pick the A1/A2/A3/A4/A5 gain variant by matching your full-scale shunt voltage to the ADC input range; keep the shunt Kelvin-connected to the IN+/IN- pins and use a 4-wire layout to preserve CMRR at high dV/dt. This page consolidates authorized-distributor pricing for the INA186A3IDCKR, true drop-in alternatives in the same SC-70-6 footprint, and PCB design guidance that goes beyond the manufacturer datasheet.

RFQ تماس
INA188ID - 36V Zero-Drift Instrumentation Amplifier | Texas Instruments
INA188ID

INA188ID - 36V Zero-Drift Instrumentation Amplifier | Texas Instruments

The Texas Instruments INA188ID is a single-channel, 36 V zero-drift instrumentation amplifier with rail-to-rail output, selectable gain from 1 to 1000, and an 8-pin SOIC package. It provides a gain of 1 + (50 kΩ/RG), allowing one external resistor to set the gain while preserving the established instrumentation-amplifier connection. According to the Texas Instruments product page, the INA188ID is intended for precision signal measurement and sensor conditioning, including temperature sensing and bridge-based measurements, and is specified over a -40°C to +125°C temperature range. An instrumentation amplifier is a specialized differential amplifier that measures a small voltage difference between two inputs while offering high input impedance, common-mode rejection, and gain accuracy. The INA188 belongs to the zero-drift instrumentation-amplifier family, a subtype of precision analog amplifiers used for sensor interfaces, current measurement, biomedical instrumentation, and industrial process control. Its internal auto-zeroing techniques reduce offset voltage and offset drift, making it more suitable for slowly varying precision signals than a conventional amplifier whose offset moves with temperature. Key features include a 36 V maximum supply voltage, rail-to-rail output operation, gains from 1 to 1000, and a maximum input offset voltage of 55 µV as reported by the comparative distributor data. The reference pin supports output level shifting in single-supply systems and offset calibration. A single gain-setting resistor simplifies design-in, while the zero-drift architecture addresses offset stability in temperature, bridge, and slow-current-measurement systems. The 8-pin SOIC package also supports conventional surface-mount assembly. The gain relationship G = 1 + (50 kΩ/RG) allows the sensor interface to be scaled without an active gain network. For example, a 1 kΩ gain resistor produces a nominal gain of 51, while a 50 Ω resistor produces a nominal gain of 1001 before rounding and standard gain-error considerations are applied. The reference input provides an additional analog node for systems that cannot shift their output entirely in the analog domain. Designers should preserve the instrumentation-amplifier grounding and input-common-mode requirements when evaluating usable signal range. Typical uses include strain-gauge and load-cell bridges, RTD and thermocouple signal conditioning, precision current-shunt measurements, battery monitoring, and low-level sensor acquisition. The INA188ID is particularly appropriate when low offset and low drift matter more than wideband response. In bridge systems, its differential input arrangement and adjustable gain can amplify the small bridge imbalance while limiting sensitivity to common-mode voltage. In battery-powered equipment, the reference pin can place the output within the usable range of a single-supply analog-to-digital converter. The primary design consideration is ensuring that input and output common-mode voltages remain inside the device's operating limits at every gain and supply condition. Gain-set resistor tolerance contributes directly to gain accuracy, so precision resistors may be required for calibrated measurements. Input filtering, source impedance, reference-pin routing, and exposed-area thermal management should also be evaluated before production release. This product page consolidates manufacturer specifications, verified distributor pricing, package details, comparison data, and practical design guidance. It also distinguishes verified drop-in candidates from broader functional alternatives so engineers can assess footprint, gain-setting, voltage-range, and precision differences before changing a production design.

RFQ تماس
INA188IDR - 36V Zero-Drift Instrumentation Amplifier | Texas Instruments (Tape & Reel)
INA188IDR

INA188IDR - 36V Zero-Drift Instrumentation Amplifier | Texas Instruments (Tape & Reel)

The Texas Instruments INA188IDR is a single-channel, 36 V zero-drift instrumentation amplifier with rail-to-rail output, selectable gain from 1 to 1000, and an 8-pin SOIC package. It provides a gain of 1 + (50 kΩ/RG), allowing one external resistor to set the gain while preserving the established instrumentation-amplifier connection. According to the Texas Instruments product page, the INA188IDR is intended for precision signal measurement and sensor conditioning, including temperature sensing and bridge-based measurements, and is specified over a -40°C to +125°C temperature range. An instrumentation amplifier is a specialized differential amplifier that measures a small voltage difference between two inputs while offering high input impedance, common-mode rejection, and gain accuracy. The INA188 belongs to the zero-drift instrumentation-amplifier family, a subtype of precision analog amplifiers used for sensor interfaces, current measurement, biomedical instrumentation, and industrial process control. Its internal auto-zeroing techniques reduce offset voltage and offset drift, making it more suitable for slowly varying precision signals than a conventional amplifier whose offset moves with temperature. Key features include a 36 V maximum supply voltage, rail-to-rail output operation, gains from 1 to 1000, and a maximum input offset voltage of 55 µV as reported by the comparative distributor data. The reference pin supports output level shifting in single-supply systems and offset calibration. A single gain-setting resistor simplifies design-in, while the zero-drift architecture addresses offset stability in temperature, bridge, and slow-current-measurement systems. The 8-pin SOIC package also supports conventional surface-mount assembly. The gain relationship G = 1 + (50 kΩ/RG) allows the sensor interface to be scaled without an active gain network. For example, a 1 kΩ gain resistor produces a nominal gain of 51, while a 50 Ω resistor produces a nominal gain of 1001 before rounding and standard gain-error considerations are applied. The reference input provides an additional analog node for systems that cannot shift their output entirely in the analog domain. Designers should preserve the instrumentation-amplifier grounding and input-common-mode requirements when evaluating usable signal range. Typical uses include strain-gauge and load-cell bridges, RTD and thermocouple signal conditioning, precision current-shunt measurements, battery monitoring, and low-level sensor acquisition. The INA188IDR is particularly appropriate when low offset and low drift matter more than wideband response. In bridge systems, its differential input arrangement and adjustable gain can amplify the small bridge imbalance while limiting sensitivity to common-mode voltage. In battery-powered equipment, the reference pin can place the output within the usable range of a single-supply analog-to-digital converter. The primary design consideration is ensuring that input and output common-mode voltages remain inside the device's operating limits at every gain and supply condition. Gain-set resistor tolerance contributes directly to gain accuracy, so precision resistors may be required for calibrated measurements. Input filtering, source impedance, reference-pin routing, and exposed-area thermal management should also be evaluated before production release. This product page consolidates manufacturer specifications, verified distributor pricing, package details, comparison data, and practical design guidance. It also distinguishes verified drop-in candidates from broader functional alternatives so engineers can assess footprint, gain-setting, voltage-range, and precision differences before changing a production design.

RFQ تماس
INA188IDRJR - 36V Zero-Drift Instrumentation Amplifier | Texas Instruments
INA188IDRJR

INA188IDRJR - 36V Zero-Drift Instrumentation Amplifier | Texas Instruments

The Texas Instruments INA188IDRJR is a precision, zero-drift, rail-to-rail output, high-voltage instrumentation amplifier housed in an 8-pin SON (4x4 mm) package with an exposed thermal pad. It delivers 55 uV (max) input offset voltage, 0.2 uV/°C (max) input offset drift, and 104 dB (min) CMRR at gains of 10 or higher. The part operates from a wide 4 V to 36 V single supply (or ±2 V to ±18 V dual supply), accepting input signals up to the rails while swinging its output rail-to-rail. An instrumentation amplifier (INA) is a specialized differential amplifier designed for precise amplification of small differential signals in the presence of large common-mode voltages. Compared to a general-purpose op-amp built from three discrete amplifiers, an INA integrates the input buffer, gain stage, and difference amplifier into one laser-trimmed silicon block, achieving far higher common-mode rejection ratio (CMRR), lower offset drift, and far simpler single-resistor gain setting. INAs sit hierarchically inside the sensor signal-chain / analog front-end / mixed-signal IC family and are the building block of choice for bridge sensors, thermocouples, RTDs, and biomedical instrumentation. Key features include 12 nV/√Hz input voltage noise density at 1 kHz, 0.25 uVPP (0.1 Hz to 10 Hz) low-frequency noise, an industry-standard gain equation G = 1 + (50 kΩ / RG) settable from 1 V/V to 1000 V/V with a single external resistor, and a reference pin for level-shifting in single-supply operation or for offset calibration. The integrated zero-drift (chopper-stabilized) topology continuously nulls its own 1/f noise and offset, eliminating the need for periodic user calibration. The INA188 uses TI's proprietary auto-zero / chopper-stabilized architecture combined with thin-film resistor networks for the gain-setting feedback. This delivers near-ideal DC accuracy without the discrete capacitor or clock-noise artifacts of older chopper designs, while the 4 mm x 4 mm SON package exposes its complementary efficiency rating to standard SOIC-8 boards through its thermal pad. Typical applications include weigh scales and bridge sensor signal conditioning, thermocouple and RTD temperature measurement, medical instrumentation (ECG, EEG front ends), industrial process controls, and strain-gauge amplifier chains. The wide 4 V to 36 V supply range makes it a direct fit for industrial 24 V bus systems. When designing, place the gain-setting resistor close to the RG pins and add a 0.1 uF supply bypass capacitor on each supply pin; the exposed thermal pad must be soldered to a copper pad for rated thermal performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ تماس
INA190A1IRSWR - 40V Picoamp Current Sense Amp | TI
INA190A1IRSWR

INA190A1IRSWR - 40V Picoamp Current Sense Amp | TI

The Texas Instruments INA190A1IRSWR is a 40V bidirectional, zero-drift current sense amplifier (current-shunt monitor) with picoampere input bias current and an enable pin, housed in a 10-pin UQFN (RSV, 1.8 mm x 1.4 mm) package. It senses voltage drops across shunt resistors at common-mode voltages from -0.2 V to +40 V, independent of its 1.8 V-class low supply. A current sense amplifier is a specialized difference amplifier that measures the small voltage generated across a shunt resistor and converts it into a ground-referenced output signal. Within the power-management hierarchy, it sits between the shunt and an ADC or comparator, enabling precise current measurement for feedback, protection, and telemetry in systems from battery packs to industrial drives. Key features of the INA190 family include a very wide input common-mode range (-0.2 V to 40 V) that tolerates inductive kickback and reverse-battery events, ultra-low input bias current in the picoampere range that permits very small shunt resistors, and zero-drift architecture for near-DC accuracy. The INA190A1IRSWR offers an ENABLE pin for power-cycling in battery-powered designs and operates across -40C to +125C. Technically, the device uses a zero-drift (auto-zeroing) topology that eliminates offset drift over time and temperature, achieving precision far beyond conventional CMOS amplifiers. The low bias current allows shunts in the milliohm range without significant self-heating error, while the wide common-mode range permits high-side, low-side, and bidirectional sensing with a single supply. The voltage-output interface connects directly to ADCs without external conditioning. Typical applications include overcurrent protection in USB and battery-powered systems, precision current telemetry in notebooks and IoT devices, and closed-loop current feedback in industrial controls, where low shunt losses and accuracy at low supply voltages are essential. Design consideration: because the part supports a 1.8 V supply domain, verify the output swing and reference pin drive against your ADC input range to avoid clipping near the rails. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet.

RFQ تماس
INA190A2IDDFR - 40V Bidirectional Current Sense Amp | TI
INA190A2IDDFR

INA190A2IDDFR - 40V Bidirectional Current Sense Amp | TI

The Texas Instruments INA190A2IDDFR is a 40-V bidirectional, ultra-precise current-sense amplifier with picoamp-level input bias current and an integrated ENABLE pin, offered in an 8-pin TSOT-23 (DDF) package. The A2 gain option delivers a fixed 50 V/V transimpedance, supporting common-mode voltages from -0.2 V to +40 V independent of the supply rail. The zero-drift chopper-stabilized architecture keeps input offset voltage below 15 uV (typical 5 uV) and offset drift below 0.1 uV/C, which translates directly into accurate microamp-range current measurements when paired with a small shunt. A current-sense amplifier is an analog building block that converts a small differential voltage developed across a shunt resistor into a ground-referenced output voltage proportional to load current. The INA190 family belongs to the current-sense amplifier / instrumentation amplifier / signal-chain IC / analog IC taxonomy, sitting one level below general-purpose op-amps because it integrates a precision gain network and reference-stable input stage optimized for high common-mode rejection at high voltages. This category plays a central role in modern power management, where system optimization, telemetry, and closed-loop feedback demand accurate, low-latency current data. Key features include a 1.8-V to 5.5-V supply range, 65 uA typical quiescent current, 60 V common-mode transient immunity, and 40 kHz small-signal bandwidth. Output swings rail-to-rail and the device supports low-side, high-side, and bidirectional topologies, eliminating external protection circuitry in 12-V, 24-V, and 48-V industrial buses. The picoamp input bias current allows sense resistors up to tens of kilo-ohms, which is critical for monitoring sleep-mode current in battery-powered products without degrading accuracy. The zero-drift chopper architecture continuously nulls 1/f noise and thermal drift, yielding effectively DC-stable output over the full -40C to +125C operating range. The internal EN pin lets a microcontroller gate the supply current down to a sub-microamp leakage level, which is essential for always-on battery systems that must periodically wake to perform current sampling. Combined, these characteristics make the INA190A2 one of the lowest-noise, lowest-drift current-sense amplifiers in its class. Typical applications include USB-PD and Type-C cable-compensation, motor-control current loops, solar MPPT input monitors, battery-pack gas-gauging, and point-of-load telemetry in servers and telecom rectifiers. The fixed 50 V/V gain optimizes the part for low-current (sub-amp) measurements where the A1 (25 V/V) is too noisy and the A3 (100 V/V) or A4 (200 V/V) variants sacrifice dynamic range. A key design consideration is the trade-off between shunt resistance and dissipated power: choose a 50 V/V part when the load is typically below 1 A and milliohm shunts are preferred, and place the input capacitor network as close as possible to the IN+ and IN- pins to reject high-frequency transients on the common-mode bus. This page synthesizes distributor pricing, drop-in alternatives in the same TSOT-23-8 footprint, and practical design notes that go beyond the manufacturer datasheet to help engineers select, source, and qualify the INA190A2IDDFR for their next precision current-monitoring design.

RFQ تماس