AD677JN vs AD677AD مقایسه
مقایسه دقیق کنار به کنار AD677JN توسط Analog Devices و AD677AD توسط Analog Devices. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | AD677JN | AD677AD |
|---|---|---|
| برند | Analog Devices | Analog Devices |
| دسته‌بندی | ADC/DAC | ADC/DAC |
| وضعیت چرخه عمر | آخرین فرصت خرید | آخرین فرصت خرید |
| رزولوشن | 16 bit | 16 bit |
| Conversion Rate | 100 kSPS | — |
| Total Conversion Time | 10 µs | 10 us |
| نوع خروجی | Serial output | Serial |
| Architecture | Switched-capacitor / charge-redistribution ADC | — |
| Sample-and-Hold | On-chip sample-and-hold function | — |
| Missing Codes | No missing codes | — |
| Full-Power Bandwidth | 1 MHz | — |
| Total Harmonic Distortion | -99 dB | — |
| Signal-to-Noise Plus Distortion | 92 dB | — |
| Analog Supply | +5 V and +12 V | — |
| Digital Supply | VDD supply; exact operating value [DATA_NEEDED: VDD operating voltage range] | — |
| Typical Power Consumption, 10 V Reference | 450 mW during conversion | — |
| Typical Power Consumption, 5 V Reference | 360 mW during conversion | — |
| Ground Sensing | Remote analog-ground sense | — |
| Autocalibration | On-chip autocalibration | — |
| بسته‌بندی | 16-pin narrow plastic DIP | 16-lead ceramic DIP (CDIP) |
| نوع نصب | Through-hole | Through-hole |
| محدوده دمای کاری | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| وضعیت RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| نرخ نمونه‌برداری | — | 100 kSPS |
| Input Count | — | 1 analog input |
| ADC Architecture | — | Successive-approximation-register (SAR) |
| Internal Architecture | — | Switched-capacitor charge redistribution |
| Calibration | — | On-chip autocalibration with digital nonlinearity correction |
| محدوده ولتاژ ورودی | — | [DATA_NEEDED: Input voltage range] |
| ولتاژ مرجع | — | [DATA_NEEDED: External reference voltage] |
| Analog Input Type | — | [DATA_NEEDED: Unipolar or bipolar input configuration] |
| Integral Nonlinearity | — | [DATA_NEEDED: Integral nonlinearity] |
| SNR | — | [DATA_NEEDED: Signal-to-noise ratio] |
| Effective Number of Bits | — | [DATA_NEEDED: Effective number of bits] |
| Input Impedance | — | [DATA_NEEDED: Input impedance] |
| Input Sampling Capacitance | — | [DATA_NEEDED: Input sampling capacitance] |
| Digital Interface Levels | — | [DATA_NEEDED: Digital logic input and output levels] |
| Serial Clock Frequency | — | [DATA_NEEDED: Maximum serial clock frequency] |
| Supply Voltage Range | — | [DATA_NEEDED: Supply voltage range] |
| Power Consumption | — | [DATA_NEEDED: Typical and maximum power consumption] |
| Package Dimensions | — | [DATA_NEEDED: Ceramic DIP package dimensions] |
| Lead-Free Status | — | [DATA_NEEDED: Lead-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |