AD677JN vs AD677AD 비교
다음의 상세 나란히 비교: AD677JN 제조: Analog Devices 및 AD677AD 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD677JN | AD677AD |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 최종 구매 | 최종 구매 |
| 분해능 | 16 bit | 16 bit |
| Conversion Rate | 100 kSPS | — |
| Total Conversion Time | 10 µs | 10 us |
| 출력 유형 | Serial output | Serial |
| Architecture | Switched-capacitor / charge-redistribution ADC | — |
| Sample-and-Hold | On-chip sample-and-hold function | — |
| Missing Codes | No missing codes | — |
| Full-Power Bandwidth | 1 MHz | — |
| Total Harmonic Distortion | -99 dB | — |
| Signal-to-Noise Plus Distortion | 92 dB | — |
| Analog Supply | +5 V and +12 V | — |
| Digital Supply | VDD supply; exact operating value [DATA_NEEDED: VDD operating voltage range] | — |
| Typical Power Consumption, 10 V Reference | 450 mW during conversion | — |
| Typical Power Consumption, 5 V Reference | 360 mW during conversion | — |
| Ground Sensing | Remote analog-ground sense | — |
| Autocalibration | On-chip autocalibration | — |
| 패키지 | 16-pin narrow plastic DIP | 16-lead ceramic DIP (CDIP) |
| 실장 유형 | Through-hole | Through-hole |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| 샘플링 속도 | — | 100 kSPS |
| Input Count | — | 1 analog input |
| ADC Architecture | — | Successive-approximation-register (SAR) |
| Internal Architecture | — | Switched-capacitor charge redistribution |
| Calibration | — | On-chip autocalibration with digital nonlinearity correction |
| 입력 전압 범위 | — | [DATA_NEEDED: Input voltage range] |
| 기준 전압 | — | [DATA_NEEDED: External reference voltage] |
| Analog Input Type | — | [DATA_NEEDED: Unipolar or bipolar input configuration] |
| Integral Nonlinearity | — | [DATA_NEEDED: Integral nonlinearity] |
| SNR | — | [DATA_NEEDED: Signal-to-noise ratio] |
| Effective Number of Bits | — | [DATA_NEEDED: Effective number of bits] |
| Input Impedance | — | [DATA_NEEDED: Input impedance] |
| Input Sampling Capacitance | — | [DATA_NEEDED: Input sampling capacitance] |
| Digital Interface Levels | — | [DATA_NEEDED: Digital logic input and output levels] |
| Serial Clock Frequency | — | [DATA_NEEDED: Maximum serial clock frequency] |
| Supply Voltage Range | — | [DATA_NEEDED: Supply voltage range] |
| Power Consumption | — | [DATA_NEEDED: Typical and maximum power consumption] |
| Package Dimensions | — | [DATA_NEEDED: Ceramic DIP package dimensions] |
| Lead-Free Status | — | [DATA_NEEDED: Lead-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |