10AX115S1F45I1SG - Arria 10 GX FPGA, 1.15M LE, 1932-FCBGA | Intel
MPN: 10AX115S1F45I1SG ✓ فعال10AX115S1F45I1SG نمای کلی
A Field-Programmable Gate Array (FPGA) is a reprogrammable digital integrated circuit whose logic and routing are defined by user-supplied configuration bitstreams, allowing hardware to be re-architected per use case. FPGAs sit within the broader hierarchy: programmable logic -> ASIC prototyping -> accelerator silicon -> semiconductor. The Arria 10 family targets mid-range applications that need DSP/FPGA integration with transceivers, bridging between low-cost Cyclone parts and high-end Stratix devices.
Key features include 624 general-purpose I/Os, 1560 DSP blocks (18x19), embedded Hard IP for PCI Express Gen3 and 10/40/100 GbE, 14.1 Gbps transceivers, and Hard Memory Controllers for DDR4 with ECC. The 1932-ball FCBGA at 1.0 mm ball pitch is intended for top-tier PCBs with high-density escape routing.
Arria 10 GX combines a mid-density programmable fabric with hardened serial interfaces and memory controllers, balancing flexibility against power efficiency. Its transceiver and PCIe Gen3 hard IPs shorten time-to-protocol-compliance for telecom and broadcast designs.
Typical applications include 100G optical transport, military radar baseband processing, medical imaging accelerators, ASIC prototyping, and high-performance DSP pipelines.
Designers should follow Intel's Arria 10 layout guidelines, including matched-length serial lanes, decoupling on every transceiver supply pin, and pin migration across SX/AX/ST variants when planning second-source.
This page consolidates distributor pricing, same-package Arria 10 drop-in alternatives, and PCB/thermal design guidance not found in the standalone datasheet.
جایگزین‌های drop-in برای 10AX115S1F45I1SG — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای 10AX115S1F45I1SG (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Speed Grade, Package, DSP Blocks, Transceivers, Temperature Grade.
10AX115S1F45E1SG
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←10AX115S1F45I2SG
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
10AX115S2F45I1SG
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
10AX115S1F45I3SG
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
10AX115S3F45I1SG
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
10AX115S1F45I1SG حداکثر مقادیر مجاز و مشخصات الکتریکی
| Family | Arria 10 GX |
| Logic Elements | 1,150,000 |
| Embedded Memory Bits | 68,857,560 |
| DSP Blocks (18x19 Multipliers) | 1560 |
| Maximum User I/O | 624 |
| Max Transceiver Data Rate | 14.1 Gbps |
| Process Technology | 20 nm |
| Core Voltage | 0.9 V |
| بسته‌بندی | 1932-ball FCBGA (F45), 1.0 mm pitch |
| نوع نصب | Surface Mount |
| Operating Temperature Grade | Industrial (I1) |
| Speed Grade | I1 (industrial) |
| Hardened IP | PCIe Gen3, 10/40/100 GbE MAC, DDR4 memory controllers |
| RoHS / Lead-Free | RoHS compliant (SG suffix) |
| Supplier | Intel (formerly Altera) |
راهنمای پیکربندی پین 10AX115S1F45I1SG 1932-ball fcbga (f45), 1.0 mm pitch
پیکربندی پین برای 10AX115S1F45I1SG (پکیج 1932-ball fcbga (f45), 1.0 mm pitch). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای 10AX115S1F45I1SG.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
10AX115S1F45I1SG مناسب است برای 6 کاربردs: 100G Optical Transport Line Cards, Military Radar Baseband Processing, ASIC Prototyping and Emulation, Medical Imaging Accelerators, Broadcast Video Processing, High-Performance Industrial Computing.
100G Optical Transport Line Cards
The 10AX115S1F45I1SG fits 100G optical transport due to its 14.1 Gbps transceivers that aggregate into 100 GbE pipes via built-in hard MACs. With 1,150,000 logic elements and 1560 DSP 18x19 blocks, it forwards packets, performs OTN framer functions, and executes forward error correction at line rate. The I1 industrial temperature grade ensures operation in carrier-grade central offices where ambient temperatures are uncontrolled. Pin-compatible S2/S3 OPNs allow upward migration when more transceivers are needed for 200G/400G uplinks.
پیشنهادی
Military Radar Baseband Processing
The 10AX115S1F45I1SG handles radar baseband DSP because its 1560 18x19 multipliers enable pulse-Doppler, MTI, and SAR compression on streaming ADC samples. Industrial temperature grade (I1) suits ground-mobile and naval platforms, and 68,857,560 embedded bits allow large windowing buffers to be co-located with arithmetic. Hardened DDR4 controllers feed post-processed tracks to the host CPU. Designers should reserve per-pin transceiver supplies for IF digitiser links and follow Intel's Arria 10 PCB layout guidelines for matched-length serial lanes.
پیشنهادی
ASIC Prototyping and Emulation
For ASIC prototyping, the 10AX115S1F45I1SG supplies 1,150,000 logic elements to map large SoC RTL partitions, while its DDR4 hard controllers model external DRAM in real time. Engineers use multi-FPGA partitioning to prototype designs exceeding 2M ASIC gates, leveraging partial reconfiguration to iterate on sub-modules without full bitstream reloads. Hardened PCIe Gen3 and GbE MACs let the prototype talk to real peripherals, accelerating software bring-up. Choose industrial speed grade for prototypes destined for production validation chambers.
پیشنهادی
Medical Imaging Accelerators
The 10AX115S1F45I1SG accelerates CT, MRI, and ultrasound reconstruction pipelines by running back-projection, beamforming, and denoising kernels across its 1560 DSP blocks. 68 Mbits of embedded memory hold filter coefficients and intermediate slices, reducing off-chip bandwidth. Industrial temperature grade (I1) supports imaging carts in unconditioned clinical spaces. Latency-critical feedback loops benefit from deterministic hard transceivers rather than soft SERDES. Verify IEC 60601 EMI margins during PCB bring-up.
پیشنهادی
Broadcast Video Processing
Broadcast video processors leverage the 10AX115S1F45I1SG's 14.1 Gbps transceivers for SDI-over-IP (SMPTE 2110) and 4K/8K mezzanine compression. 624 user I/Os drive HDMI/SDI companion chips, while 1560 DSP blocks accelerate deinterlacing and HDR tone-mapping in real time. Hardened 10/40/100 GbE MACs deliver uncompressed 4K streams to broadcast routers. Industrial temperature grade suits outside-broadcast trucks and master-control racks with limited climate control.
پیشنهادی
High-Performance Industrial Computing
Industrial line cards route high-speed fabric traffic using the 10AX115S1F45I1SG's 14.1 Gbps transceivers for backplane connectivity and PCIe Gen3 endpoints for CPU attachment. With 68 Mbits of on-chip memory, packet headers and queuing metadata stay on-die, reducing external memory accesses. Industrial temperature grade (I1) meets harsh-environment requirements of factory automation and energy substation controllers. The 1932-ball FCBGA exposes enough I/O for parallel legacy interfaces alongside serial links, simplifying hybrid industrial designs.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای 10AX115S1F45I1SG — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | 10AX115S1F45E1SG | 10AX115S1F45I2SG | 10AX115S2F45I1SG | 10AX115S1F45I3SG | 10AX115S3F45I1SG |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 1932-ball FCBGA (F45), 1.0 mm pitch | 1932-ball FCBGA (F45) - same | 1932-ball FCBGA (F45) - same | 1932-ball FCBGA (F45) - same | 1932-ball FCBGA (F45) - same | 1932-ball FCBGA (F45) - same |
| Logic Elements | 1,150,000 | 1,150,000 | 1,150,000 | 1,150,000 | 1,150,000 | 1,150,000 |
| Speed Grade | I1 (industrial) | E1 (commercial) | I2 (industrial, faster) | I1 (industrial) | I3 (industrial, fastest) | I1 (industrial) |
| Transceiver Configuration | S1 | S1 | S1 | S2 (more transceivers) | S1 | S3 (more transceivers) |
| Embedded Memory Bits | 68,857,560 | 68,857,560 | 68,857,560 | 68,857,560 | 68,857,560 | 68,857,560 |
| DSP Blocks (18x19) | 1560 | 1560 | 1560 | 1560 | 1560 | 1560 |
| RoHS / Lead-Free | RoHS compliant (SG) | RoHS compliant (SG) | RoHS compliant (SG) | RoHS compliant (SG) | RoHS compliant (SG) | RoHS compliant (SG) |
تفاوت‌های کلیدی
- Industrial speed grade in the F45 package (در مقابل10AX115S1F45E1SG)
- Lower-cost entry to the Arria 10 S1 transceiver configuration (در مقابل10AX115S2F45I1SG)
- Faster upgrade path on the same PCB (در مقابل10AX115S1F45I2SG)
یادداشت‌های طراحی
The 1932-ball F45 FCBGA at 1.0 mm pitch requires an HDI PCB stack-up with microvia escape and matched-length serial lanes. Follow Intel's Arria 10 layout guidelines: dedicated transceiver reference clock planes, isolation of analog supplies from digital switching, and 4-6 decoupling capacitors per power pin (0.1 uF, 1 uF, 10 uF mix). Stack-up should target 1 oz copper on outer layers and 0.5 oz on inner layers with a low-loss dielectric for 14.1 Gbps signals. Estimated: at full transceiver utilisation the part dissipates roughly 25-35 W, so the PCB thermal solution should include thermal vias to internal copper planes.
Estimated: Arria 10 devices in the F45 FCBGA typically dissipate 15-40 W depending on transceiver utilisation and toggle rate. With industrial temperature grade (I1), junction temperature must stay below 100 C. Use thermal vias under the central ball array and a heatsink with thermal interface material rated for the application environment. Always validate via a thermal simulation using actual activity factors; per-pin power data is in the Arria 10 PowerPlay Early Power Estimator.
Do not confuse SX/GX OPNs with NX OPNs - they share the same package but NX variants replace transceivers with general-purpose I/O. Pin assignments for the S1 transceiver configuration differ from S2/S3, so swapping OPNs without re-fitting the bitstream will cause configuration failure. Always specify the exact OPN in the BOM and validate the configured device ID via JTAG before production release. The 'ES' suffix denotes engineering samples - never ship ES parts to production without FA qualification.
اطلاعات انطباق
RoHS compliance indicated by 'SG' suffix in the OPN per Intel ordering part number conventions. AEC-Q100 not applicable - FPGAs are not AEC-Q100 qualified; industrial temperature grade (I1) is the relevant environmental rating.
