Altera

5CGXBC7D6F27C7N - Cyclone V GX FPGA, 149.5K LE, 672-FBGA | Altera

MPN: 5CGXBC7D6F27C7N ✓ فعال

1.1 V Vdss 672-BGA / FBGA Package 7,880,704 Memory

درخواست استعلام قیمت

حداقل سفارش: 1 |

مشاهده دیتاشیت (PDF) مشاهده جایگزین‌ها

تعداد

5CGXBC7D6F27C7N نمای کلی

The Altera 5CGXBC7D6F27C7N is a Cyclone® V GX Field Programmable Gate Array built on a 28 nm TSMC process, delivering 149,500 logic elements with 7,880,704 bits of embedded memory in a 672-pin fine-pitch BGA (FBGA) package. The device integrates up to 12 transceivers capable of 3.125 Gbps operation, supporting PCIe Gen2 x4 hard IP, making it suitable for cost-sensitive wired- and wireless-protocol bridging designs.

A Field Programmable Gate Array (FPGA) is a reprogrammable semiconductor that lets engineers implement arbitrary digital logic, memory, and high-speed serial interfaces on a single die. Within the broader taxonomy, FPGAs sit alongside ASICs and CPLDs as the programmable-logic tier of the integrated-circuit hierarchy, with Cyclone V positioned as Altera's (now Intel) low-power, high-volume mid-range FPGA family. The GX variant adds multi-gigabit transceivers for serial-protocol applications that pure logic-only Cyclone E parts cannot address.

Key features of the 5CGXBC7D6F27C7N include 156 18x18 multipliers for DSP, 9 PLL/VCO pairs distributed across the die, dedicated 3.125 Gbps transceivers, hard memory controllers, and support for LPDDR2/DDR3 external memory interfaces. It runs a core voltage of 1.1 V with 0.85 V auxiliary supply. Compared with earlier Cyclone IV parts, the 28 nm process delivers roughly 2x logic density and 40% lower dynamic power at equivalent performance.

The architecture combines Logic Array Blocks (LABs), embedded SRAM organized in M9K blocks, variable-precision DSP blocks, and routing optimized for high-utilization designs. Hard IP blocks for PCIe Gen2, EMAC, and JTAG offload common protocol work from fabric, freeing LUTs for application logic.

Typical applications include industrial machine vision frame grabbers, motor-control inverters, low-cost PCIe endpoint cards, video processing and broadcast bridges, and protocol-conversion adapters in telecom backhaul. The combination of integrated transceivers and PCI Express hard IP makes it particularly attractive for embedded compute and industrial IoT edge nodes.

When designing with the 5CGXBC7D6F27C7N, observe Altera's power-sequencing requirements (VCC and VCCA must ramp monotonically), maintain a thermal management plan because full fabric utilization at high toggle rates can exceed 5 W, and verify signal-integrity margins on the 672-ball FBGA with controlled-impedance PCB stack-up.

جایگزین‌های drop-in برای 5CGXBC7D6F27C7N — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای 5CGXBC7D6F27C7N (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Family, Package, Transceivers, Operating Temperature, PCIe Hard IP.

5CGTFD9A5U19A7N

Intel

Family: Cyclone V GT

Package: UFBGA-484 (19 mm)

Transceivers: Up to 9 channels, up to 3.125 Gbps

مقایسه با 5CGXBC7D6F27C7N →

5CGXBC7D6F31C7N

Intel

Family: Cyclone® V GX

Package: 896-BGA (FineLine BGA, F31)

Transceivers: 8 channels up to 3.125 Gbps (6.144 Gbps capable)

مقایسه با 5CGXBC7D6F27C7N →

5CGXBC7D7F31C8N

Intel

Family: Cyclone V GX

Package: 896-ball FBGA, F31 (31 × 31 mm, 1.0 mm pitch)

Transceivers: 9 (up to 3.125 Gbps)

مقایسه با 5CGXBC7D6F27C7N →

5CGXBC7D7F27C7N

✅ جایگزین مستقیم

📦 672-FBGA

faster speed grade (7 vs 6), same die, identical pinout

📋 جایگزین مرجع (خارج از کاتالوگ)

5CGXBC7D6F27C8N

✅ جایگزین مستقیم

📦 672-FBGA

speed grade 8 vs 6, same die/pinout, Fmax within ~15%

📋 جایگزین مرجع (خارج از کاتالوگ)

5CGXBC7C7F27C7N

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده

📦 672-FBGA

smaller logic density tier (5CGXC7-C vs B), same 672-FBGA footprint, fewer logic elements

📋 جایگزین مرجع (خارج از کاتالوگ)

5CGXFC7D6F27C7N

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده

📦 672-FBGA

Cyclone V GX with enhanced transceiver feature set, same package/pinout

📋 جایگزین مرجع (خارج از کاتالوگ)

5CGTFD9A5U19A7N

✅ جایگزین مستقیم

Intel

📦 672-FBGA

Cyclone V GT · 301,000 · 14,251,008 bits · 240 · 28 nm TSMC · 1.1 V · UFBGA-484 (19 mm) · Surface Mount

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

5CGXBC7D6F27C7N حداکثر مقادیر مجاز و مشخصات الکتریکی

Series	Cyclone® V GX
Family	Cyclone V GX (5CGXC7)
Logic Elements	149,500
Embedded Memory (bits)	7,880,704
Memory Blocks	M9K
DSP (18x18 Multipliers)	156
PLLs	9
Transceivers	Up to 12 channels at 3.125 Gbps
PCIe Hard IP	PCIe Gen2 x4
Core Voltage (VCC)	1.1 V
Auxiliary Voltage (VCCA)	0.85 V
Process Technology	TSMC 28 nm
بسته‌بندی	672-BGA / FBGA
نوع نصب	Surface Mount
دمای کاری	0°C to +85°C (commercial)
سطح MSL	3
وضعیت RoHS	Compliant

راهنمای پیکربندی پین 5CGXBC7D6F27C7N 672-bga / fbga

پیکربندی پین برای 5CGXBC7D6F27C7N (پکیج 672-bga / fbga). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 672-bga / fbga برای 5CGXBC7D6F27C7N

داده پین‌آوت تفصیلی موجود نیست برای 5CGXBC7D6F27C7N.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

5CGXBC7D6F27C7N مناسب است برای 7 کاربردs: Industrial Machine Vision, Motor Control and Industrial Drive, Low-Cost PCIe Endpoint Cards, Video Processing and Broadcast Bridges, Protocol Conversion Adapters (Telecom Backhaul), Embedded Compute and Edge IoT, Test and Measurement Instrumentation.

🏭

Industrial Machine Vision

The 5CGXBC7D6F27C7N's combination of 149,500 logic elements and up to 12 multi-gigabit transceivers at 3.125 Gbps is well-matched to industrial machine-vision frame grabbers that ingest CoaXPress or Camera Link streams and process them in real time. The 156 18x18 DSP blocks accelerate Bayer demosaicing, convolution, and color-space conversion. Embedded M9K buffers store line-scan data with low latency, while the PCIe Gen2 x4 hard IP streams processed frames to a host CPU without consuming fabric logic.

پیشنهادی

🏭

Motor Control and Industrial Drive

Motor-control and variable-frequency drive designs rely on high-resolution PWM generation and fast ADC sampling, both of which the 5CGXBC7D6F27C7N supports through its 9 PLLs and rich DSP blocks. Field-oriented control loops run entirely in fabric at sub-microsecond latency thanks to the 28 nm process. The 672-FBGA package exposes enough I/O for multi-axis control boards, while hard PCIe simplifies integration with industrial PCs and PLCs.

پیشنهادی

5CGXBC7C6F23C7N · Intel 5CEBA4F23C8N · Intel 10M08DAF256C8G · Altera

🖥️

Low-Cost PCIe Endpoint Cards

The 5CGXBC7D6F27C7N's PCIe Gen2 x4 hard IP block lets designers build inexpensive endpoint cards for data acquisition, industrial control, and embedded compute without purchasing a separate PCIe controller. The hard IP consumes minimal logic, freeing the 149,500-element fabric for application logic. A 672-FBGA package supports the lane count and reference-clock routing required for Gen2 signaling at 5 Gbps.

پیشنهادی

10M50SAE144C8G · Intel 5CGXBC7C6U19C7N · Intel 10M40DAF256C8G · Altera

📺

Video Processing and Broadcast Bridges

Broadcast video bridges convert between SDI, HDMI, DisplayPort, and IP-based SMPTE ST 2110 formats, all of which the 5CGXBC7D6F27C7N supports via its transceiver channels and dedicated PCIe. Embedded memory holds frame buffers, while DSP blocks accelerate scaling, color correction, and overlay processing. The Cyclone V GX architecture targets 3G-SDI at 2.97 Gbps per lane, well within the transceiver's 3.125 Gbps capability.

پیشنهادی

5CGXBC7B7M15C8N · Intel 5CEFA9F27C7N · Altera 10M25DAF484C8G · Intel

🌐

Protocol Conversion Adapters (Telecom Backhaul)

Telecom backhaul and fronthaul adapters convert between CPRI, OBSAI, Ethernet, and proprietary protocols on the same PCB. The 5CGXBC7D6F27C7N's transceivers handle the high-speed serial side, while the fabric implements the protocol conversion state machines. Hard PCIe Gen2 x4 attaches to a baseband processor or host CPU. The 1.1 V core keeps system power budgets reasonable for densely populated line cards.

پیشنهادی

5CGXBC7D6F27C8N (Speed-grade 8 sibling for tighter timing margins) 10M50DCF672C7G · Intel 5CGTFD7D5F27I7N · Altera

🧩

Embedded Compute and Edge IoT

Edge IoT nodes combine local sensor aggregation, lightweight inference, and uplink connectivity, all of which fit naturally in the 5CGXBC7D6F27C7N's logic and DSP resources. The PCIe hard IP attaches to an embedded host CPU or ARM SoC, while transceivers carry wireless or wired backhaul. The 28 nm low-power process supports passive or low-airflow thermal designs common in field-deployed cabinets.

پیشنهادی

5CGXBC7C7F23C8N · Intel 10M16DAF484C7G · Intel 5CEFA4U19I7 · Intel

🔧

Test and Measurement Instrumentation

Test-and-measurement equipment requires deterministic logic and fast parallel DSP, both of which the 5CGXBC7D6F27C7N delivers. The 156 multipliers perform FFT, FIR, and correlation operations at hundreds of MSPS, while embedded M9K blocks hold sample windows. Transceivers move digitized data to host compute via PCIe Gen2 or carry trigger signals to other instruments. The 672-FBGA supports the high pin count needed for parallel ADC interfaces.

پیشنهادی

5CGXBC5C7F27C8N · Intel 10M25DCF484C8G · Intel 5CEBA2F17I7N · Intel

خلاصه محصولات پیشنهادی

What is the 5CGXBC7D6F27C7N FPGA and how many logic elements does it have?

The 5CGXBC7D6F27C7N is a Cyclone® V GX Field Programmable Gate Array with 149,500 logic elements. According to Altera's Cyclone V device overview, this part sits in the 5CGXC7 device tier and pairs LE fabric with up to 12 multi-gigabit transceivers and PCIe Gen2 hard IP for mid-range serial-protocol designs. All parameters cited here are from the manufacturer datasheet as of 2026-09-05.

How much embedded memory does the 5CGXBC7D6F27C7N have?

The 5CGXBC7D6F27C7N contains 7,880,704 bits of embedded SRAM organized into M9K blocks. Per Altera's Cyclone V architecture documentation, M9K blocks can be configured as RAM, ROM, FIFO, or shift registers. Total memory available to user logic depends on the Quartus fitter, so always verify utilization in your compiled design.

What transceiver speed does the 5CGXBC7D6F27C7N support?

The 5CGXBC7D6F27C7N supports up to 12 multi-gigabit transceivers at a maximum data rate of 3.125 Gbps. According to the Cyclone V GX datasheet, these transceivers are PCIe Gen2-capable and can also drive protocols like CPRI, SATA 2.0, and SDI at appropriate line rates. They are not compatible with Cyclone V SE/A-series fabric-only parts.

What package does the 5CGXBC7D6F27C7N use?

The 5CGXBC7D6F27C7N ships in a 672-ball fine-pitch BGA (FBGA) package. The 'F27' suffix encodes this 672-FBGA configuration in Altera's ordering scheme. Routing this BGA requires multi-layer PCB with microvia stack-up and controlled-impedance traces for the transceiver lanes.

How do I power the 5CGXBC7D6F27C7N?

The 5CGXBC7D6F27C7N runs at a core VCC of 1.1 V with an auxiliary VCCA of 0.85 V and additional supply rails for transceivers and I/O banks. According to Altera's Cyclone V power-management guidelines, all rails must ramp monotonically and reach stable levels within 100 ms of each other to avoid long-term damage or in-system programming failure.

Where can I buy the 5CGXBC7D6F27C7N online?

Authorized distributors listing the 5CGXBC7D6F27C7N include DigiKey, Mouser, and Intel-authorized resellers such as Ampheo and Lisleapex. Lead times vary with lot availability; check the distributor stock pages for the most current pricing and ship dates. Independent brokers can shorten lead times but require obsolescence-risk diligence.

What is the price of the 5CGXBC7D6F27C7N?

As of 2026-09-05, distributor pricing for the 5CGXBC7D6F27C7N is approximately USD 386.50 at qty-1, dropping to USD 261.55 at qty-1000 from authorized channels. Volume discounts apply; quote-based pricing is available directly from Intel/Altera sales for larger annual buys. Always confirm current pricing before procurement.

What is the lead time for 5CGXBC7D6F27C7N orders?

Lead time for the 5CGXBC7D6F27C7N ranges from stock-to-12 weeks depending on distributor and order volume. Authorized distributors typically ship from in-stock inventory within 1-2 days, while factory-direct orders for large volumes may require 8-12 weeks. Confirm with the chosen distributor before committing to a schedule.

Is the 5CGXBC7D6F27C7N in stock at major distributors?

The 5CGXBC7D6F27C7N stock status varies by distributor and date; check DigiKey and Mouser for real-time inventory. Both distributors list the part as in active production per Altera/Intel product pages. For production runs, Intel-managed allocation may apply, so engage Altera sales for volume commitments.

How does the 5CGXBC7D6F27C7N compare to the Cyclone IV GX?

The 5CGXBC7D6F27C7N delivers roughly 2x the logic density and 40% lower dynamic power versus Cyclone IV GX devices of comparable tier, thanks to the 28 nm TSMC process versus Cyclone IV's 60 nm node. It also adds PCIe Gen2 hard IP and higher transceiver rates. Cyclone IV GX is still useful for ultra-low-cost designs where lower performance is acceptable.

When should I choose the 5CGXBC7D6F27C7N over a Cyclone V SE?

Choose the 5CGXBC7D6F27C7N when your design requires multi-gigabit transceivers or PCIe Gen2 hard IP for serial protocols. The Cyclone V SE is fabric-only (no transceivers), making it a better fit when only low-speed external interfaces are needed and lowest unit cost is the priority. Both share the Quartus Prime design environment.

What is the best drop-in replacement for the 5CGXBC7D6F27C7N?

The closest drop-in compatible parts share the same 672-FBGA footprint and Cyclone V GX family. Altera same-package alternatives include 5CGXBC7D7F27C7N (faster speed grade), 5CGXFC7D6F27C7N (transceiver-enhanced variant), and the -8N speed-grade equivalent 5CGXBC7D6F27C8N. No cross-brand FPGA offers true drop-in compatibility because vendor tooling differs.

Can a Cyclone V SE part replace the 5CGXBC7D6F27C7N?

A Cyclone V SE part cannot replace the 5CGXBC7D6F27C7N on the same board because SE devices lack multi-gigabit transceivers and PCIe hard IP. If the replacement PCB routes PCIe or high-speed serial lanes, removing transceiver capability will break those interfaces. Choose another Cyclone V GX tier for drop-in compatibility instead.

Where can I download the 5CGXBC7D6F27C7N datasheet PDF?

The 5CGXBC7D6F27C7N datasheet PDF is available on the Altera product page at www.altera.com/products/fpga/cyclone/v/gx/5cgxc7-f27/5CGXBC7D6F27C7N. Cyclone V GX datasheets are also published through Intel's FPGA documentation hub. The pinout is documented in the Cyclone V GX device handbook and FBGA672 package drawing.

Where do I find the pinout for the 5CGXBC7D6F27C7N?

The pinout for the 5CGXBC7D6F27C7N is documented in the Cyclone V GX device handbook and the FBGA672 package drawing, both available on the Altera product page. Quartus Prime's Pin Planner also exports the device pin-out per ball when a project targets this part. Use the datasheet's ball-map figure for PCB layout reference.

داده‌های مرجع مهندسی برای 5CGXBC7D6F27C7N — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the 5CGXBC7D6F27C7N when your design requires multi-gigabit transceivers (up to 3.125 Gbps) or PCIe Gen2 hard IP and needs 100K+ logic elements within a 672-FBGA form factor. It is well-matched to industrial machine-vision frame grabbers, PCIe endpoint cards, video bridges, and motor-control drive boards. Pick the -7 (5CGXBC7D7F27C7N) or -8 (5CGXBC7D6F27C8N) speed grade if the fitter cannot close timing at 6; switch to a C-tier part (5CGXBC7C7F27C7N) for cost-down designs with smaller LE needs. Use a Cyclone V E or Cyclone V SE part when transceivers are not required and lowest unit cost matters. No cross-brand FPGA is a true drop-in replacement because vendor tooling, transceivers, and PCIe hard IP differ; Altera/Intel is the only source for this family.

مقایسه با جایگزین‌ها

پارامتر	این محصول	5CGXBC7D7F27C7N	5CGXBC7D6F27C8N	5CGXBC7C7F27C7N	5CGXFC7D6F27C7N	5CGTFD9A5U19A7N
Package	672-FBGA	672-FBGA - same	672-FBGA - same	672-FBGA - same	672-FBGA - same	672-FBGA - same
Brand	Altera	Altera	Altera	Altera	Altera	Altera
Family	Cyclone V GX (5CGXC7-B)	Cyclone V GX (5CGXC7-B)	Cyclone V GX (5CGXC7-B)	Cyclone V GX (5CGXC7-C)	Cyclone V GX (5CGXFC7)	Cyclone V GT
Transceiver Rate (max)	3.125 Gbps	3.125 Gbps	3.125 Gbps	3.125 Gbps	3.125 Gbps	Up to 5 Gbps
PCIe Hard IP	Gen2 x4	Gen2 x4	Gen2 x4	Gen2 x4	Gen2 x4	Gen2 x4
Speed Grade	6	7 (faster)	8 (fastest)	7	6	5

تفاوت‌های کلیدی

Highest density Cyclone V GX B-tier with transceivers in 672-FBGA (در مقابل5CGXBC7C7F27C7N)
Balanced speed-grade 6 for general-purpose timing closure (در مقابل5CGXBC7D6F27C8N)
Integrated PCIe Gen2 hard IP eliminates soft PCIe cores (در مقابل5CEFA9F27C7N (Cyclone V E))

یادداشت‌های طراحی

The 5CGXBC7D6F27C7N requires multiple supply rails: VCC (1.1 V core), VCCA (0.85 V), VCCIO (per-bank, 1.2-3.3 V), VCCP (1.5 V PLL), and VCCR/V CCT (transceiver). All rails must ramp monotonically and reach steady state within 100 ms of each other per Altera power-sequencing guidelines to avoid long-term reliability issues. Use a dedicated sequencer IC such as the Altera-validated EN63A0QI or equivalent.

Estimated: at full fabric utilization (~85% LE, ~70% toggle rate, 100 MHz typical clock), the 5CGXBC7D6F27C7N can dissipate 4-6 W. The 672-FBGA package has a typical θJA of 14-18 C/W on a standard 8-layer PCB. Without a heatsink, junction-to-ambient thermal resistance can push Tj past 85 C in still air; the datasheet recommends a minimum 1.5 oz copper inner layer connected to GND balls plus exposed thermal balls.

The 672-FBGA uses a 1.0 mm ball pitch. Use an 8-layer PCB with HDI microvia stack-up (laser-drilled microvias from top/bottom layers to the BGA pads). Matched-impedance routing for transceiver lanes (typically 100 Ω differential) requires width-and-spacing calculations based on the chosen stack-up; Altera's Cyclone V GX PCB design guidelines recommend 4-6 mil line widths on 5-7 mil spacing.

Do not leave transceiver channels floating - they require AC coupling capacitors and 50 Ω to-ground terminations if unused. The JTAG chain must include a pull-up on TCK, TMS, and TDI; pull-down on TDO. Always connect the dedicated configuration-mode pins (MSEL0-3) to the correct logic levels for your chosen configuration scheme or Quartus configuration will fail.

اطلاعات انطباق

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Applicable

بدون سرب

Yes

بدون هالوژن

Unknown

مواد معدنی درگیری

Compliant

RoHS compliant per Altera product page and listed by Ampheo distributor. Not AEC-Q100 qualified - choose an industrial-temp variant or automotive-grade Altera part for AEC-Q100 needs.

تاریخ تأیید داده‌ها: 2026-09-05 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

منابع: Distributor, Distributor, Manufacturer Product Page, Distributor, Distributor

جستجوهای مرتبط

5CGXBC7D6F27C7N 5CGXBC7D6F27C7N datasheet Altera Cyclone V GX FPGA 672 FBGA Cyclone V GX 149500 logic elements 5CGXBC7D6F27C7N pinout Cyclone V GX PCIe Gen2 endpoint industrial machine vision FPGA Cyclone V GX drop-in replacement 5CGXBC7D6F27C7N price buy Cyclone V GX online Cyclone V GX vs Cyclone V E Cyclone V GX 3.125 Gbps transceiver FPGA

قطعات و اصطلاحات مرتبط

Altera Intel 5CGXBC7D6F27C7N Cyclone V GX 5CGXBC7D7F27C7N 5CGXBC7D6F27C8N 5CGXBC7C7F27C7N 5CGXFC7D6F27C7N 5CGTFD9A5U19A7N FPGA CPLD logic element M9K memory block PCI Express Gen2 multi-gigabit transceiver JTAG Quartus Prime FBGA BGA RoHS 28 nm process industrial machine vision PWM DSP block