5CGXBC7D6F27C7N - Cyclone V GX FPGA, 149.5K LE, 672-FBGA | Altera
部品番号: 5CGXBC7D6F27C7N ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $386.5 | $386.50 |
| 10 | $367.18 | $3,671.80 |
| 100 | $328.53 | $32,853.00 |
| 500 | $289.88 | $144,940.00 |
| 1,000 | $261.55 | $261,550.00 |
5CGXBC7D6F27C7N 概要
A Field Programmable Gate Array (FPGA) is a reprogrammable semiconductor that lets engineers implement arbitrary digital logic, memory, and high-speed serial interfaces on a single die. Within the broader taxonomy, FPGAs sit alongside ASICs and CPLDs as the programmable-logic tier of the integrated-circuit hierarchy, with Cyclone V positioned as Altera's (now Intel) low-power, high-volume mid-range FPGA family. The GX variant adds multi-gigabit transceivers for serial-protocol applications that pure logic-only Cyclone E parts cannot address.
Key features of the 5CGXBC7D6F27C7N include 156 18x18 multipliers for DSP, 9 PLL/VCO pairs distributed across the die, dedicated 3.125 Gbps transceivers, hard memory controllers, and support for LPDDR2/DDR3 external memory interfaces. It runs a core voltage of 1.1 V with 0.85 V auxiliary supply. Compared with earlier Cyclone IV parts, the 28 nm process delivers roughly 2x logic density and 40% lower dynamic power at equivalent performance.
The architecture combines Logic Array Blocks (LABs), embedded SRAM organized in M9K blocks, variable-precision DSP blocks, and routing optimized for high-utilization designs. Hard IP blocks for PCIe Gen2, EMAC, and JTAG offload common protocol work from fabric, freeing LUTs for application logic.
Typical applications include industrial machine vision frame grabbers, motor-control inverters, low-cost PCIe endpoint cards, video processing and broadcast bridges, and protocol-conversion adapters in telecom backhaul. The combination of integrated transceivers and PCI Express hard IP makes it particularly attractive for embedded compute and industrial IoT edge nodes.
When designing with the 5CGXBC7D6F27C7N, observe Altera's power-sequencing requirements (VCC and VCCA must ramp monotonically), maintain a thermal management plan because full fabric utilization at high toggle rates can exceed 5 W, and verify signal-integrity margins on the 672-ball FBGA with controlled-impedance PCB stack-up.
ドロップイン代替品: 5CGXBC7D6F27C7N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 5CGXBC7D6F27C7N （同一形状・フットプリント） — 相違点: Family, Package, Transceivers, Operating Temperature, PCIe Hard IP.
クイック比較ツール — 並列比較する代替部品を選択:
5CGXBC7D7F27C7N
✅ ドロップイン📋 参考代替品（カタログ未掲載）
5CGXBC7D6F27C8N
✅ ドロップイン📋 参考代替品（カタログ未掲載）
5CGXBC7C7F27C7N
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
5CGXFC7D6F27C7N
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
5CGTFD9A5U19A7N
✅ ドロップイン✓ 在庫あり
$241.5 / 個
データシートを見る →5CGXBC7D6F27C7N 最大定格＆電気的特性
| Series | Cyclone® V GX |
| Family | Cyclone V GX (5CGXC7) |
| Logic Elements | 149,500 |
| Embedded Memory (bits) | 7,880,704 |
| Memory Blocks | M9K |
| DSP (18x18 Multipliers) | 156 |
| PLLs | 9 |
| Transceivers | Up to 12 channels at 3.125 Gbps |
| PCIe Hard IP | PCIe Gen2 x4 |
| Core Voltage (VCC) | 1.1 V |
| Auxiliary Voltage (VCCA) | 0.85 V |
| Process Technology | TSMC 28 nm |
| パッケージ | 672-BGA / FBGA |
| 実装タイプ | Surface Mount |
| 動作温度 | 0°C to +85°C (commercial) |
| MSLレベル | 3 |
| RoHS ステータス | Compliant |
5CGXBC7D6F27C7N 672-bga / fbga ピン配置ガイド
5CGXBC7D6F27C7N (672-bga / fbga パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: 5CGXBC7D6F27C7N.
詳細は データシート をご参照ください。
主な用途
5CGXBC7D6F27C7N の用途: 7 件s: Industrial Machine Vision, Motor Control and Industrial Drive, Low-Cost PCIe Endpoint Cards, Video Processing and Broadcast Bridges, Protocol Conversion Adapters (Telecom Backhaul), Embedded Compute and Edge IoT, Test and Measurement Instrumentation.
Industrial Machine Vision
The 5CGXBC7D6F27C7N's combination of 149,500 logic elements and up to 12 multi-gigabit transceivers at 3.125 Gbps is well-matched to industrial machine-vision frame grabbers that ingest CoaXPress or Camera Link streams and process them in real time. The 156 18x18 DSP blocks accelerate Bayer demosaicing, convolution, and color-space conversion. Embedded M9K buffers store line-scan data with low latency, while the PCIe Gen2 x4 hard IP streams processed frames to a host CPU without consuming fabric logic.
おすすめ
Motor Control and Industrial Drive
Motor-control and variable-frequency drive designs rely on high-resolution PWM generation and fast ADC sampling, both of which the 5CGXBC7D6F27C7N supports through its 9 PLLs and rich DSP blocks. Field-oriented control loops run entirely in fabric at sub-microsecond latency thanks to the 28 nm process. The 672-FBGA package exposes enough I/O for multi-axis control boards, while hard PCIe simplifies integration with industrial PCs and PLCs.
おすすめ
Low-Cost PCIe Endpoint Cards
The 5CGXBC7D6F27C7N's PCIe Gen2 x4 hard IP block lets designers build inexpensive endpoint cards for data acquisition, industrial control, and embedded compute without purchasing a separate PCIe controller. The hard IP consumes minimal logic, freeing the 149,500-element fabric for application logic. A 672-FBGA package supports the lane count and reference-clock routing required for Gen2 signaling at 5 Gbps.
おすすめ
Video Processing and Broadcast Bridges
Broadcast video bridges convert between SDI, HDMI, DisplayPort, and IP-based SMPTE ST 2110 formats, all of which the 5CGXBC7D6F27C7N supports via its transceiver channels and dedicated PCIe. Embedded memory holds frame buffers, while DSP blocks accelerate scaling, color correction, and overlay processing. The Cyclone V GX architecture targets 3G-SDI at 2.97 Gbps per lane, well within the transceiver's 3.125 Gbps capability.
おすすめ
Protocol Conversion Adapters (Telecom Backhaul)
Telecom backhaul and fronthaul adapters convert between CPRI, OBSAI, Ethernet, and proprietary protocols on the same PCB. The 5CGXBC7D6F27C7N's transceivers handle the high-speed serial side, while the fabric implements the protocol conversion state machines. Hard PCIe Gen2 x4 attaches to a baseband processor or host CPU. The 1.1 V core keeps system power budgets reasonable for densely populated line cards.
おすすめ
Embedded Compute and Edge IoT
Edge IoT nodes combine local sensor aggregation, lightweight inference, and uplink connectivity, all of which fit naturally in the 5CGXBC7D6F27C7N's logic and DSP resources. The PCIe hard IP attaches to an embedded host CPU or ARM SoC, while transceivers carry wireless or wired backhaul. The 28 nm low-power process supports passive or low-airflow thermal designs common in field-deployed cabinets.
おすすめ
Test and Measurement Instrumentation
Test-and-measurement equipment requires deterministic logic and fast parallel DSP, both of which the 5CGXBC7D6F27C7N delivers. The 156 multipliers perform FFT, FIR, and correlation operations at hundreds of MSPS, while embedded M9K blocks hold sample windows. Transceivers move digitized data to host compute via PCIe Gen2 or carry trigger signals to other instruments. The 672-FBGA supports the high pin count needed for parallel ADC interfaces.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 5CGXBC7D6F27C7N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | 5CGXBC7D7F27C7N | 5CGXBC7D6F27C8N | 5CGXBC7C7F27C7N | 5CGXFC7D6F27C7N | 5CGTFD9A5U19A7N |
|---|---|---|---|---|---|---|
| Package | 672-FBGA | 672-FBGA - same | 672-FBGA - same | 672-FBGA - same | 672-FBGA - same | 672-FBGA - same |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Family | Cyclone V GX (5CGXC7-B) | Cyclone V GX (5CGXC7-B) | Cyclone V GX (5CGXC7-B) | Cyclone V GX (5CGXC7-C) | Cyclone V GX (5CGXFC7) | Cyclone V GT |
| Transceiver Rate (max) | 3.125 Gbps | 3.125 Gbps | 3.125 Gbps | 3.125 Gbps | 3.125 Gbps | Up to 5 Gbps |
| PCIe Hard IP | Gen2 x4 | Gen2 x4 | Gen2 x4 | Gen2 x4 | Gen2 x4 | Gen2 x4 |
| Speed Grade | 6 | 7 (faster) | 8 (fastest) | 7 | 6 | 5 |
主な差別化要因
- Highest density Cyclone V GX B-tier with transceivers in 672-FBGA （vs 5CGXBC7C7F27C7N)
- Balanced speed-grade 6 for general-purpose timing closure （vs 5CGXBC7D6F27C8N)
- Integrated PCIe Gen2 hard IP eliminates soft PCIe cores （vs 5CEFA9F27C7N (Cyclone V E))
設計ノート
The 5CGXBC7D6F27C7N requires multiple supply rails: VCC (1.1 V core), VCCA (0.85 V), VCCIO (per-bank, 1.2-3.3 V), VCCP (1.5 V PLL), and VCCR/V CCT (transceiver). All rails must ramp monotonically and reach steady state within 100 ms of each other per Altera power-sequencing guidelines to avoid long-term reliability issues. Use a dedicated sequencer IC such as the Altera-validated EN63A0QI or equivalent.
Estimated: at full fabric utilization (~85% LE, ~70% toggle rate, 100 MHz typical clock), the 5CGXBC7D6F27C7N can dissipate 4-6 W. The 672-FBGA package has a typical θJA of 14-18 C/W on a standard 8-layer PCB. Without a heatsink, junction-to-ambient thermal resistance can push Tj past 85 C in still air; the datasheet recommends a minimum 1.5 oz copper inner layer connected to GND balls plus exposed thermal balls.
The 672-FBGA uses a 1.0 mm ball pitch. Use an 8-layer PCB with HDI microvia stack-up (laser-drilled microvias from top/bottom layers to the BGA pads). Matched-impedance routing for transceiver lanes (typically 100 Ω differential) requires width-and-spacing calculations based on the chosen stack-up; Altera's Cyclone V GX PCB design guidelines recommend 4-6 mil line widths on 5-7 mil spacing.
Do not leave transceiver channels floating - they require AC coupling capacitors and 50 Ω to-ground terminations if unused. The JTAG chain must include a pull-up on TCK, TMS, and TDI; pull-down on TDO. Always connect the dedicated configuration-mode pins (MSEL0-3) to the correct logic levels for your chosen configuration scheme or Quartus configuration will fail.
コンプライアンス情報
RoHS compliant per Altera product page and listed by Ampheo distributor. Not AEC-Q100 qualified - choose an industrial-temp variant or automotive-grade Altera part for AEC-Q100 needs.
