A3P600L-FG256I - 600K Gate Flash FPGA, 177 I/O | Microchip
MPN: A3P600L-FG256I ✓ فعالA3P600L-FG256I نمای کلی
A flash FPGA is a field-programmable gate array whose configuration is stored in on-chip nonvolatile flash memory rather than an external configuration PROM. Within the programmable logic hierarchy (FPGA -> programmable logic device -> semiconductor), flash FPGAs occupy the single-chip, instant-on niche: they power up with configuration already loaded, need no boot device, and resist cloning better than SRAM FPGAs.
Key features of the A3P600L include single-chip operation with onboard flash configuration, 1.2 V to 1.5 V core voltage support (the L suffix denotes the low-power 1.2 V core variant), reprogrammability for in-field updates, Flash*Freeze-style low static power in the ProASIC3L family, and small-footprint packaging that reduces total cost of ownership versus ASIC alternatives.
Technically, the device is built from VersaTiles, a fine-grained logic architecture, with embedded SRAM blocks providing the 110,592 memory bits for FIFOs and dual-port buffering. The 130 nm flash process delivers system performance up to the several-hundred-MHz class cited by distributors for the family while keeping static power low.
Typical applications include industrial automation control, military and aerospace subsystems requiring secure instant-on logic, communications line-card glue logic, and medical instrumentation, where single-chip configuration and long-lifecycle supply matter.
Design consideration: budget the 1.2 V core rail carefully; the L variant trades top speed for lower dynamic power versus the standard 1.5 V A3P600, so verify timing closure at your speed grade.
This page synthesizes distributor inventory data, family drop-in options, and practical design notes not found in a single manufacturer datasheet.
جایگزین‌های drop-in برای A3P600L-FG256I — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای A3P600L-FG256I (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, RoHS Status, System Gates, Family, Operating Temperature.
A3P600L-FG256
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
A3P600-FG256I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←A3P1000L-FG256
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←A3P400-FG256I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←A3P1000-1FGG256
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←A3P600L-FG256I حداکثر مقادیر مجاز و مشخصات الکتریکی
| Family | ProASIC3L |
| Logic Gates | 600000 gates |
| User I/O | 177 |
| Embedded RAM | 110592 bits |
| Core Voltage | 1.2 V |
| Process Technology | 130 nm flash |
| Configuration Memory | On-chip flash (nonvolatile, single-chip) |
| بسته‌بندی | 256-ball FBGA (LBGA) |
| Temperature Grade | Industrial (-40C to +100C junction) |
| نوع نصب | Surface Mount |
| Programming | In-system reprogrammable flash |
| Speed Grade | Standard (see ordering code) |
راهنمای پیکربندی پین A3P600L-FG256I 256-ball fbga (lbga)
پیکربندی پین برای A3P600L-FG256I (پکیج 256-ball fbga (lbga)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای A3P600L-FG256I.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
A3P600L-FG256I مناسب است برای 6 کاربردs: Industrial Automation and Motor Control, Secure Military and Aerospace Subsystems, Communications Line-Card Glue Logic, Medical Instrumentation Control Logic, ASIC Prototyping and Low-Volume Emulation, Battery-Powered Portable and IoT Equipment.
Industrial Automation and Motor Control
The A3P600L-FG256I fits industrial control and motor drive logic because its 600K flash gates absorb state machines, PWM generation, and fieldbus interfaces that would otherwise consume several glue-logic ICs. Its 1.2 V core lowers dynamic power inside sealed drives and cabinets with limited airflow, while 177 user I/O covers encoders, sensors, and isolated communication channels. Because configuration lives in on-chip flash, the controller is active the instant 24 V plant power arrives - no boot delay that could miss a safety handshake. Flash reprogrammability also allows firmware field updates without changing the PCB.
پیشنهادی
Secure Military and Aerospace Subsystems
Defense and aerospace boards select the A3P600L-FG256I for its instant-on flash configuration and inherent resistance to bitstream cloning, since no external configuration PROM exposes the design. The industrial -40C to +100C grade and mature 130 nm flash process suit long-lifecycle programs that need decades of supply continuity. Its 600K gates host interface bridging, telemetry formatting, and soft ARM control, while 110,592 embedded RAM bits buffer sensor streams. For programs requiring radiation tolerance, engineers migrate to Microchip RT-class devices, but for COTS avionics and ground systems this single-chip FPGA reduces component count and security audit surface.
پیشنهادی
Communications Line-Card Glue Logic
In telecom and networking line cards, the A3P600L-FG256I bridges asynchronous interfaces, formats backplane framing, and handles clock-domain crossing with its 110,592 bits of embedded dual-port SRAM. The 1.2 V core keeps per-switch dynamic power low across dense chassis, easing shelf-level thermal budgets that are typically constrained to 15-25 W per slot. Instant-on flash configuration matters where backplane management expects logic alive within milliseconds of -48 V power insertion. The 256-ball FBGA's 1.0 mm pitch fits standard 8-12 layer card processes, and 177 user I/O terminate rear-panel and fabric signals without external level shifters in 3.3 V and 2.5 V banks.
پیشنهادی
Medical Instrumentation Control Logic
Medical diagnostic devices benefit from the A3P600L-FG256I's deterministic instant-on behavior: front-end acquisition logic is live before an operator completes power-on checks, with no configuration-load window that could lose the first sample burst. The 600K gates implement ADC sequencing, filtering datapaths, and USB/Ethernet bridging to the host, while the low 1.2 V core reduces heat inside patient-adjacent enclosures. Flash-based configuration simplifies regulatory documentation of a single-chip, tamper-resistant design. Long product lifecycles typical of medical platforms align with Microchip's continued support of the ProASIC3 family and its mature, well-characterized 130 nm process node.
پیشنهادی
ASIC Prototyping and Low-Volume Emulation
Design teams use the A3P600L-FG256I to prototype ASIC control blocks and bridge logic before committing to masks. The 600K-gate fabric and reprogrammable flash let engineers iterate RTL daily without changing hardware, and the instant-on behavior reproduces ASIC power-up semantics more faithfully than SRAM FPGAs that need a load sequence. Its 177 user I/O and embedded 110,592-bit RAM support representative peripheral sets on a single device. Because the same FG256 footprint spans 400K to 1000K gate family members, a prototype board can be respun to higher density with no PCB change - an economical path from emulation through low-volume production where ASIC unit costs are unjustified.
پیشنهادی
Battery-Powered Portable and IoT Equipment
Portable instruments and battery-backed IoT nodes choose the A3P600L because the L-suffix 1.2 V core directly cuts dynamic power versus the 1.5 V A3P600, extending charge life in duty-cycled acquisition nodes. The single-chip flash architecture removes the external configuration PROM from the BOM - a real area and leakage saving where every square millimeter and microamp counts across a multi-year field deployment. The FPGA handles sensor fusion preprocessing and protocol translation, waking instantly on external triggers with no configuration delay that would drop the first event. The industrial temperature rating also suits outdoor enclosures beyond typical commercial limits.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای A3P600L-FG256I — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | A3P600L-FG256 | A3P600-FG256I | A3P1000L-FG256 | A3P400-FG256I | A3P1000-1FGG256 |
|---|---|---|---|---|---|---|
| Package | 256-ball FBGA (FG256) | 256-ball FBGA - same | 256-ball FBGA - same | 256-ball FBGA - same | 256-ball FBGA - same | 256-ball FGG256 - same footprint, Pb-free finish |
| Brand | Microchip Technology (Microsemi) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Logic Gates | 600000 | 600000 | 600000 | 1000000 | 400000 | 1000000 |
| Core Voltage | 1.2 V | 1.2 V | 1.5 V | 1.2 V | 1.5 V | 1.5 V |
| Configuration | On-chip flash (single-chip, instant-on) | On-chip flash | On-chip flash | On-chip flash | On-chip flash | On-chip flash |
تفاوت‌های کلیدی
- Lowest-power core in the 600K-gate class (در مقابلA3P600-FG256I)
- Industrial temperature rating over the commercial twin (در مقابلA3P600L-FG256)
- Balanced density point with same-footprint upgrade path (در مقابلA3P1000L-FG256)
یادداشت‌های طراحی
Plan three supply rails: 1.2 V core (A3P600L), 2.5 V for PLL/analog, and bank-selectable I/O voltages (1.5 V to 3.3 V per ProASIC3 datasheet). Do not share the core rail with other 1.2 V switching loads without ferrite isolation; core noise directly degrades timing margins. Estimated: a 600K-gate design toggling at moderate activity typically draws hundreds of mA on the core rail - size the regulator with at least 50% headroom and verify with Microchip's SmartPower estimator in Libero SoC before finalizing the DC-DC design.
The 256-ball 1.0 mm-pitch FBGA requires via-in-pad or dog-bone fanout on at least a 6-layer board; dedicate layer 2 to a solid core-voltage plane and stitch 0.1 uF ceramics to every VCC ball group within 2 mm, plus bulk 22-47 uF per rail. Confirm the FG256 ball map against the datasheet mechanical drawing before routing - dedicated configuration and JTAG balls cannot be reassigned. Use Libero SoC's pin report as the single source of truth to avoid bank-voltage conflicts in the final netlist.
A frequent mistake is treating the L variant as interchangeable with the 1.5 V A3P600 without checking power-on ramp requirements: both flash devices need monotonic supply ramp per datasheet power-sequencing guidance, or the power-on-reset may mis-trigger. Also verify the -I temperature derating applies to your speed grade file - industrial parts ship with timing characterized across the full -40C to +100C range, and using a commercial timing model in an industrial build risks marginal paths. Always re-run static timing at the shipped speed grade.
اطلاعات انطباق
Compliance status not stated in the provided web data; verify on Microchip's product page environmental section before procurement.
