ADS1253EG4 - 24-Bit, 20-kSPS Delta-Sigma ADC | Texas Instruments
MPN: ADS1253EG4 ✓ فعالADS1253EG4 نمای کلی
A delta-sigma ADC is a voltage-to-digital converter category that uses oversampling, noise shaping, and digital filtering to achieve high resolution and excellent low-frequency noise performance. The ADS1253EG4 belongs to the hierarchy of analog-to-digital converters, data-converter ICs, signal-chain semiconductors, and integrated circuits. Differential inputs help reject common-mode noise when a sensor is referenced to a local analog ground or connected through shielded, balanced wiring.
Key features include 24-bit resolution, an output data rate of 20 kSPS, four differential input channels, and a sigma-delta conversion architecture. The device operates from a single 5 V supply and exposes its data through a two-wire serial interface identified in the product information as SPI-compatible. A 20 kSPS maximum rate is appropriate for pressure, temperature, strain, load-cell, flow, and industrial process signals rather than high-bandwidth waveform acquisition.
The four-channel differential architecture supports simultaneous analog monitoring from multiple sensors while reducing the number of external converters required. Because the input stage and digital filter determine signal fidelity, grounding, reference selection, input protection, and clock implementation require careful PCB planning. A stable voltage reference and correctly placed bypass capacitors are particularly important when the converter must preserve its nominal 24-bit resolution.
Typical applications include precision pressure and temperature measurement, load-cell and strain-gauge instrumentation, battery-cell monitoring, laboratory data acquisition, process-control equipment, and portable industrial measurement systems. The 20-kSPS rate is especially suitable for slowly changing physical quantities that do not require high-frequency sampling.
Design the analog input path with short traces, solid ground-plane continuity, and protection networks selected not to distort the intended measurement bandwidth. Use the manufacturer pin-description and recommended-application information when assigning differential inputs, reference terminals, bypass connections, and serial-interface signals. This page consolidates the verified product characteristics, same-package alternatives, and application guidance for faster component selection.
جایگزینهای drop-in برای ADS1253EG4 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ADS1253EG4 (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Input Configuration, Resolution, Integral Nonlinearity, Number of Input Channels.
ADS1254E
✅ جایگزین مستقیم✓ موجود
$11.4844 / واحد
مشاهده دیتاشیت ←ADS1240E
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ADS1251UG4
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ADS1256IDBR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ADS1252E
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ADS1255E
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ADS1253EG4 حداکثر مقادیر مجاز و مشخصات الکتریکی
| ADC Resolution | 24 bit |
| Maximum Sampling Rate | 20 kSPS |
| Number of Input Channels | 4 channels |
| Input Configuration | 4 differential inputs |
| Conversion Architecture | 1 sigma-delta architecture |
| Analog Supply Voltage | 5 V |
| Digital Supply Voltage | 5 V |
| Minimum Operating Supply | 4.75 V |
| Supply Configuration | 1 single supply |
| Serial Interface | 2-wire SPI-compatible serial interface |
| بستهبندی | 16-SSOP |
| Package Type | SSOP |
| Terminal Form | Gull wing |
| Number of Terminals | 16 terminals |
| نوع نصب | Surface mount |
| Temperature Grade | Industrial |
راهنمای پیکربندی پین ADS1253EG4 ssop
پیکربندی پین برای ADS1253EG4 (پکیج ssop). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای ADS1253EG4.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ADS1253EG4 مناسب است برای 6 کاربردs: Precision Load-Cell Measurement, Industrial Pressure and Flow Sensing, Temperature Measurement and Control, Battery-Cell Monitoring, Laboratory and Portable Instrumentation, Process-Control Data Acquisition.
Precision Load-Cell Measurement
The ADS1253EG4 fits load-cell and strain-gauge instrumentation because its four differential inputs can reject common-mode voltage while measuring low-level bridge signals. The 24-bit nominal resolution supports high-resolution digitization of slow force, weight, and pressure changes, and the 20-kSPS maximum rate is ample for typical mechanical response frequencies. Place the bridge excitation, analog input paths, and reference circuitry near the converter to minimize offsets and noise. Confirm differential range, common-mode limits, and recommended front-end gain using the manufacturer datasheet before finalizing the bridge amplifier network.
پیشنهادی
Industrial Pressure and Flow Sensing
The ADS1253EG4 is appropriate for industrial pressure transmitters and slow flow-control loops where sensor outputs are small differential voltages rather than high-frequency waveforms. Its four channels allow a controller to monitor several pressure lines or process variables, while the single 5 V supply simplifies industrial power architecture. The 24-bit nominal resolution supports fine measurement resolution, and the 20-kSPS maximum output rate provides margin beyond typical process-control bandwidth. Use filtering appropriate to the sensor dynamics and protect each input against surge or out-of-range industrial transients.
پیشنهادی
Temperature Measurement and Control
The ADS1253EG4 can digitize several low-bandwidth temperature channels from resistive sensors, thermocouple front ends, or ratiometric bridges. Four differential inputs reduce the converter count in multizone thermal systems, while 24-bit nominal resolution preserves fine code resolution when the signal is properly amplified and referenced. The 20-kSPS maximum rate exceeds the needs of most thermal loops, allowing selectable digital filtering to suppress noise. A stable reference is critical because offset and reference drift can dominate low-level temperature measurements, so assess the complete analog signal chain rather than converter resolution alone.
پیشنهادی
Battery-Cell Monitoring
The ADS1253EG4 is suitable for multi-cell battery monitoring when each cell produces a differential voltage that must be measured against a controlled reference. Its four input channels reduce the number of separate converters in a compact battery-management assembly, and the 24-bit nominal resolution supports detailed cell-voltage characterization. The 20-kSPS maximum rate permits sampling during controlled charge and discharge cycles. The design must still provide a low-noise reference, cell-input isolation or multiplexing as required, and protection for high-energy battery nodes while keeping all converter signals within their specified limits.
پیشنهادی
Laboratory and Portable Instrumentation
The ADS1253EG4 supports laboratory and portable instruments that acquire low-level differential sensor signals with high resolution. Four channels enable simultaneous monitoring of transducers, while the 20-kSPS maximum rate suits temperature, strain, force, and slowly varying electrical measurements. Its 24-bit nominal resolution provides a high digital-code range, but usable accuracy still depends on analog front-end noise, reference stability, and digital-filter selection. In portable equipment, low-noise supply design and careful grounding are particularly important because battery variation and ground coupling can degrade the converter's effective measurement performance.
پیشنهادی
Process-Control Data Acquisition
The ADS1253EG4 is appropriate for process-control systems that monitor several slowly changing analog quantities and require more resolution than conventional low-resolution SAR converters. Four differential channels can represent pressure, flow, level, or temperature signals referenced to local analog ground, helping suppress noise picked up from industrial wiring. The 20-kSPS maximum rate exceeds the bandwidth of most chemical and thermal processes, while 24-bit nominal resolution allows calibration maps to preserve fine measurement detail. Place input filtering close to the pins, maintain a continuous ground plane, and isolate digital switching from the reference and analog input return paths.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ADS1253EG4 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ADS1254E | ADS1240E | ADS1251UG4 | ADS1256IDBR | ADS1252E | ADS1255E |
|---|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP |
تفاوتهای کلیدی
- Four differential inputs in one converter (در مقابلADS1252E)
- 20-kSPS maximum output rate (در مقابلADS1254E)
- Single 5 V supply architecture (در مقابلADS1240E)
یادداشتهای طراحی
Route each differential input as a tightly coupled pair and keep the analog inputs away from SPI clock, chip-select, and switching-regulator nodes. Place the input bypass capacitors and the ADC grounding connection close to the device to minimize trace inductance and ground bounce. Maintain continuous ground-plane return paths beneath the analog section rather than splitting the plane, because a split can increase analog-to-digital coupling even when both sections appear logically separated.
Use separate low-impedance branches for analog and digital bypass capacitors, with the regulator or reference source feeding the analog branch through the layout recommended by the manufacturer datasheet. A 24-bit converter can have very high nominal code resolution, but reference noise and supply ripple can reduce usable accuracy. Check capacitor effective capacitance, voltage derating, dielectric behavior, and regulator output noise before treating the converter's nominal resolution as system accuracy.
Do not substitute an ADS125x-family device solely because it uses a 16-SSOP outline. Confirm pin names, analog input assignments, reference connections, digital-interface timing, supported data rates, channel behavior, reset requirements, and command sequencing. Firmware may also need different initialization or calibration settings for another member of the family. A footprint match is only the first step in establishing replacement compatibility.
اطلاعات انطباق
The manufacturer product information identifies an industrial-grade ADC but does not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Compliance fields remain unknown until confirmed from the manufacturer documentation.