Texas Instruments

ADS1253EG4 - 24-Bit, 20-kSPS Delta-Sigma ADC | Texas Instruments

MPN: ADS1253EG4 ✓ فعال
5 V Vdss 16-SSOP Package
MOQ: 1 |

ADS1253EG4 جائزہ

The Texas Instruments ADS1253EG4 is a 24-bit, 20-kSPS, four-channel delta-sigma analog-to-digital converter with four differential inputs, a single 5 V supply, and an SPI-compatible serial interface. The converter is packaged in a 16-SSOP surface-mount package and is intended for precision analog measurement, industrial sensing, and instrumentation systems. Its 24-bit nominal resolution supports high-resolution digitization of low-frequency sensor signals while providing four differential channels in a compact footprint.

A delta-sigma ADC is a voltage-to-digital converter category that uses oversampling, noise shaping, and digital filtering to achieve high resolution and excellent low-frequency noise performance. The ADS1253EG4 belongs to the hierarchy of analog-to-digital converters, data-converter ICs, signal-chain semiconductors, and integrated circuits. Differential inputs help reject common-mode noise when a sensor is referenced to a local analog ground or connected through shielded, balanced wiring.

Key features include 24-bit resolution, an output data rate of 20 kSPS, four differential input channels, and a sigma-delta conversion architecture. The device operates from a single 5 V supply and exposes its data through a two-wire serial interface identified in the product information as SPI-compatible. A 20 kSPS maximum rate is appropriate for pressure, temperature, strain, load-cell, flow, and industrial process signals rather than high-bandwidth waveform acquisition.

The four-channel differential architecture supports simultaneous analog monitoring from multiple sensors while reducing the number of external converters required. Because the input stage and digital filter determine signal fidelity, grounding, reference selection, input protection, and clock implementation require careful PCB planning. A stable voltage reference and correctly placed bypass capacitors are particularly important when the converter must preserve its nominal 24-bit resolution.

Typical applications include precision pressure and temperature measurement, load-cell and strain-gauge instrumentation, battery-cell monitoring, laboratory data acquisition, process-control equipment, and portable industrial measurement systems. The 20-kSPS rate is especially suitable for slowly changing physical quantities that do not require high-frequency sampling.

Design the analog input path with short traces, solid ground-plane continuity, and protection networks selected not to distort the intended measurement bandwidth. Use the manufacturer pin-description and recommended-application information when assigning differential inputs, reference terminals, bypass connections, and serial-interface signals. This page consolidates the verified product characteristics, same-package alternatives, and application guidance for faster component selection.

کے لیے ڈراپ اِن متبادل ADS1253EG4 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADS1253EG4 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Input Configuration, Resolution, Integral Nonlinearity, Number of Input Channels.

Texas Instruments
Package: 24-SSOP
Resolution: 24 bits
Integral Nonlinearity: 0.0015%
موازنہ کریں ADS1253EG4 →
Texas Instruments
Resolution: 24 bit
Integral Nonlinearity: 15 ppm maximum
Number of Input Channels: 4
موازنہ کریں ADS1253EG4 →
Texas Instruments
Package: SSOP-20 (DBQ)
Resolution: 24 bit
Integral Nonlinearity: 15 ppm maximum
موازنہ کریں ADS1253EG4 →
Texas Instruments
Package: 28-pin SSOP
Input Configuration: 4 differential or 8 single-ended inputs
Resolution: 24 bit
موازنہ کریں ADS1253EG4 →

ADS1254E

✅ ڈراپ-اِن
Texas Instruments
📦 16-SSOP
Delta-sigma ADC · 24 bit · 20 kSPS · 19 bit · 4 channels · 4 differential inputs · 1.8 ppm · 15 ppm maximum

✓ اسٹاک میں

$11.4844 / یونٹ

ڈیٹا شیٹ دیکھیں →

ADS1240E

✅ ڈراپ-اِن
Texas Instruments
📦 16-SSOP
24-bit delta-sigma ADC · 24 bits · 21 bits · 24 bits · 4 channels · 30 samples per second · 2.7 V to 5.25 V · 1 to 128

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ADS1251UG4

✅ ڈراپ-اِن
📦 16-SSOP
Same ADS125x family and 16-SSOP footprint, with different channel configuration and conversion-rate limits of no more than 30%

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ADS1256IDBR

✅ ڈراپ-اِن
Texas Instruments
📦 16-SSOP
24 bit · 30 kSPS · 4 differential or 8 single-ended inputs · Fourth-order delta-sigma modulator with programmable digital filter · Integrated · 28-pin SSOP · -40 °C to +85 °C · Factory automation and process control

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ADS1252E

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 16-SSOP
Same-family footprint, but nominal resolution is 16 bit versus the ADS1253EG4's 24 bit, a 33% reduction

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ADS1255E

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 16-SSOP
Same-package 24-bit ADS125x family variant with acquisition-rate and channel-function differences of up to 30%

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ADS1253EG4 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

ADC Resolution 24 bit
Maximum Sampling Rate 20 kSPS
Number of Input Channels 4 channels
Input Configuration 4 differential inputs
Conversion Architecture 1 sigma-delta architecture
Analog Supply Voltage 5 V
Digital Supply Voltage 5 V
Minimum Operating Supply 4.75 V
Supply Configuration 1 single supply
Serial Interface 2-wire SPI-compatible serial interface
پیکیج 16-SSOP
Package Type SSOP
Terminal Form Gull wing
Number of Terminals 16 terminals
ماؤنٹنگ ٹائپ Surface mount
Temperature Grade Industrial

ADS1253EG4 ssop پن کنفیگریشن گائیڈ

ADS1253EG4 (ssop پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

ADS1253EG4 کے لیے ssop پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADS1253EG4.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ADS1253EG4 کے لیے موزوں ہے 6 ایپلیکیشنs: Precision Load-Cell Measurement, Industrial Pressure and Flow Sensing, Temperature Measurement and Control, Battery-Cell Monitoring, Laboratory and Portable Instrumentation, Process-Control Data Acquisition.

🏭

Precision Load-Cell Measurement

The ADS1253EG4 fits load-cell and strain-gauge instrumentation because its four differential inputs can reject common-mode voltage while measuring low-level bridge signals. The 24-bit nominal resolution supports high-resolution digitization of slow force, weight, and pressure changes, and the 20-kSPS maximum rate is ample for typical mechanical response frequencies. Place the bridge excitation, analog input paths, and reference circuitry near the converter to minimize offsets and noise. Confirm differential range, common-mode limits, and recommended front-end gain using the manufacturer datasheet before finalizing the bridge amplifier network.

🏭

Industrial Pressure and Flow Sensing

The ADS1253EG4 is appropriate for industrial pressure transmitters and slow flow-control loops where sensor outputs are small differential voltages rather than high-frequency waveforms. Its four channels allow a controller to monitor several pressure lines or process variables, while the single 5 V supply simplifies industrial power architecture. The 24-bit nominal resolution supports fine measurement resolution, and the 20-kSPS maximum output rate provides margin beyond typical process-control bandwidth. Use filtering appropriate to the sensor dynamics and protect each input against surge or out-of-range industrial transients.

🔧

Temperature Measurement and Control

The ADS1253EG4 can digitize several low-bandwidth temperature channels from resistive sensors, thermocouple front ends, or ratiometric bridges. Four differential inputs reduce the converter count in multizone thermal systems, while 24-bit nominal resolution preserves fine code resolution when the signal is properly amplified and referenced. The 20-kSPS maximum rate exceeds the needs of most thermal loops, allowing selectable digital filtering to suppress noise. A stable reference is critical because offset and reference drift can dominate low-level temperature measurements, so assess the complete analog signal chain rather than converter resolution alone.

⚡

Battery-Cell Monitoring

The ADS1253EG4 is suitable for multi-cell battery monitoring when each cell produces a differential voltage that must be measured against a controlled reference. Its four input channels reduce the number of separate converters in a compact battery-management assembly, and the 24-bit nominal resolution supports detailed cell-voltage characterization. The 20-kSPS maximum rate permits sampling during controlled charge and discharge cycles. The design must still provide a low-noise reference, cell-input isolation or multiplexing as required, and protection for high-energy battery nodes while keeping all converter signals within their specified limits.

🖥️

Laboratory and Portable Instrumentation

The ADS1253EG4 supports laboratory and portable instruments that acquire low-level differential sensor signals with high resolution. Four channels enable simultaneous monitoring of transducers, while the 20-kSPS maximum rate suits temperature, strain, force, and slowly varying electrical measurements. Its 24-bit nominal resolution provides a high digital-code range, but usable accuracy still depends on analog front-end noise, reference stability, and digital-filter selection. In portable equipment, low-noise supply design and careful grounding are particularly important because battery variation and ground coupling can degrade the converter's effective measurement performance.

🌐

Process-Control Data Acquisition

The ADS1253EG4 is appropriate for process-control systems that monitor several slowly changing analog quantities and require more resolution than conventional low-resolution SAR converters. Four differential channels can represent pressure, flow, level, or temperature signals referenced to local analog ground, helping suppress noise picked up from industrial wiring. The 20-kSPS maximum rate exceeds the bandwidth of most chemical and thermal processes, while 24-bit nominal resolution allows calibration maps to preserve fine measurement detail. Place input filtering close to the pins, maintain a continuous ground plane, and isolate digital switching from the reference and analog input return paths.

What are the key specifications of ADS1253EG4 that engineers should know?
The ADS1253EG4 provides 24-bit resolution, a maximum output rate of 20 kSPS, four differential inputs, and a single 5 V supply in a 16-SSOP package. According to the Texas Instruments product page and manufacturer datasheet, it uses a sigma-delta conversion architecture with an SPI-compatible two-wire serial interface. These characteristics make it suitable for high-resolution, low-frequency industrial measurements rather than high-bandwidth signal acquisition.
Where can I download the ADS1253EG4 datasheet PDF?
The ADS1253EG4 datasheet and ordering information are available from the Texas Instruments ADS1253 product page linked on this page. The manufacturer page identifies the device as a 24-bit, 20-kSPS, four-channel, single-supply delta-sigma ADC. Use the manufacturer documentation for the complete pin-description table, recommended application circuit, digital-interface timing, and electrical-characteristic curves.
What is the operating voltage of ADS1253EG4?
The ADS1253EG4 operates from a nominal 5 V supply, and its documented minimum operating supply is 4.75 V. The verified product information identifies both analog and digital supply operation at 5 V. Confirm the complete supply-voltage limits and sequencing requirements in the Texas Instruments manufacturer datasheet before designing the power rails.
How many channels and inputs does ADS1253EG4 have?
The ADS1253EG4 has four analog channels configured as four differential inputs. Texas Instruments describes the product as a four-channel, 24-bit, 20-kSPS delta-sigma ADC. Differential operation is useful for rejecting common-mode disturbances on sensor signals, particularly when the transducer is grounded near the measurement electronics rather than at the ADC.
What is the conversion rate of ADS1253EG4?
The maximum output data rate of the ADS1253EG4 is 20 kSPS. According to the Texas Instruments product page, this rate accompanies 24-bit resolution and a four-channel differential architecture. The device is therefore well matched to temperature, pressure, strain, load, and flow measurements whose useful bandwidth is much lower than the converter's maximum sample rate.
Is ADS1253EG4 suitable for load-cell and strain-gauge measurement?
The ADS1253EG4 is suitable for load-cell and strain-gauge front ends because its four differential inputs can reject common-mode noise and its 24-bit nominal resolution supports precise low-level measurements. The 20-kSPS maximum rate accommodates typical mechanical and temperature variables. Instrumentation-amplifier gain, excitation regulation, reference stability, and input filtering still determine practical system accuracy.
What can replace ADS1253EG4 on the same PCB footprint?
ADS1254E is the closest same-family alternative identified for the ADS1253EG4, with a 24-bit delta-sigma ADC and a compatible 16-SSOP comparison context. Other ADS125x family devices can use the same footprint in some designs, but channel configuration, data rate, and functional behavior differ. Verify the complete pin-description table, register map, and acquisition timing before treating any alternative as a drop-in replacement.
Is ADS1253EG4 the same as ADS1254E?
ADS1253EG4 and ADS1254E are related 24-bit delta-sigma ADCs, but they should not be treated as identical without a pin and register review. Both are associated with the ADS125x family and the comparison identifies shared 24-bit conversion concepts, while their input and acquisition characteristics differ. Use the manufacturer datasheets to confirm pin compatibility, supported data rates, channel behavior, and command sequencing.
ADS1253EG4 vs ADS1254E: which is better for a precision bridge measurement?
Choose ADS1254E when its documented acquisition and channel characteristics match the bridge measurement better; otherwise retain ADS1253EG4. Both devices provide 24-bit delta-sigma conversion and can be evaluated in the same 16-SSOP family context. The correct choice depends on differential-channel behavior, supported output rates, digital-filter configuration, interface timing, and exact pin functions rather than resolution alone.
ADS1253EG4 vs ADS1251UG4: which converter fits a low-frequency sensor?
ADS1253EG4 provides four differential input channels at up to 20 kSPS, while ADS1251UG4 belongs to a related ADS125x family with a different conversion and channel configuration. For a design using four differential sensor channels, ADS1253EG4 is the more direct match. Review the manufacturer pinouts and register maps because the shared package alone does not guarantee identical behavior.
When should I choose ADS1253EG4 instead of ADS1240E?
Choose ADS1253EG4 when the design specifically needs its four differential channels, 24-bit nominal resolution, and 20-kSPS maximum output rate. ADS1240E is a related low-power delta-sigma ADC comparison candidate, but its architecture and configuration may differ. Compare input count, selectable data rates, digital filter behavior, reference requirements, interface timing, and pin functions against the system requirements.
Is ADS1253EG4 in stock and what is its lead time?
Current ADS1253EG4 availability and lead time should be requested through the Request a Quote form on this page. The listing indicates that the exact 16-SSOP industrial-grade part is commercially offered, but availability changes with demand and production planning. Submit the required quantity and target date so procurement can confirm the current supply position and delivery schedule.
Where can I buy ADS1253EG4 and what is the price?
Use the Request a Quote form on this page to request ADS1253EG4 pricing, stock confirmation, and delivery terms for the required quantity. The structured pricing interface updates independently of the technical article, so a static price should not be copied into engineering discussions. Include the 16-SSOP package, industrial temperature grade, and target quantity to obtain an actionable quotation.
How do I choose between ADS1253EG4 and a same-package alternative?
Select ADS1253EG4 when four differential inputs, 24-bit nominal resolution, and a 20-kSPS maximum rate match the signal chain. Select a same-package ADS125x or ADS1240E candidate only after confirming that its pin functions, input topology, supported rates, digital filter, interface timing, and command set satisfy the existing PCB and firmware. Package equality is necessary but does not by itself prove interchangeability.
What are the best Texas Instruments equivalents for ADS1253EG4?
ADS1254E is the strongest same-family Texas Instruments candidate identified for a same-package replacement review because it also uses a 24-bit delta-sigma architecture. ADS1251UG4, ADS1240E, ADS1256IDBR, ADS1252E, and ADS1255E provide additional family reference points, but each may differ in channel count, data rate, or acquisition behavior. Verify every candidate against the ADS1253EG4 pin and register requirements.

کے لیے انجینئرنگ ریفرنس ڈیٹا ADS1253EG4 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose ADS1253EG4 when the measurement system needs four differential inputs, 24-bit nominal resolution, and up to 20 kSPS in a 16-SSOP package. It is particularly appropriate for bridges, pressure sensors, temperature channels, and industrial signals whose bandwidth is low enough for delta-sigma conversion. ADS1254E is the leading same-family option when its documented acquisition behavior better matches the design. ADS1251UG4 and ADS1240E should be considered only after checking channel configuration, supported rates, and register compatibility. ADS1256IDBR, ADS1252E, and ADS1255E provide related same-package choices, but resolution, input topology, and acquisition behavior may differ. For every candidate, verify the complete pin table, reference requirements, interface timing, and digital-filter settings. A shared 16-SSOP outline supports PCB reuse, but it does not guarantee firmware or analog-function equivalence.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ ADS1254E ADS1240E ADS1251UG4 ADS1256IDBR ADS1252E ADS1255E
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-SSOP 16-SSOP 16-SSOP 16-SSOP 16-SSOP 16-SSOP 16-SSOP

اہم امتیازی خصوصیات

  • Four differential inputs in one converter (بمقابلہADS1252E)
  • 20-kSPS maximum output rate (بمقابلہADS1254E)
  • Single 5 V supply architecture (بمقابلہADS1240E)

ڈیزائن نوٹس

Route each differential input as a tightly coupled pair and keep the analog inputs away from SPI clock, chip-select, and switching-regulator nodes. Place the input bypass capacitors and the ADC grounding connection close to the device to minimize trace inductance and ground bounce. Maintain continuous ground-plane return paths beneath the analog section rather than splitting the plane, because a split can increase analog-to-digital coupling even when both sections appear logically separated.

Use separate low-impedance branches for analog and digital bypass capacitors, with the regulator or reference source feeding the analog branch through the layout recommended by the manufacturer datasheet. A 24-bit converter can have very high nominal code resolution, but reference noise and supply ripple can reduce usable accuracy. Check capacitor effective capacitance, voltage derating, dielectric behavior, and regulator output noise before treating the converter's nominal resolution as system accuracy.

Do not substitute an ADS125x-family device solely because it uses a 16-SSOP outline. Confirm pin names, analog input assignments, reference connections, digital-interface timing, supported data rates, channel behavior, reset requirements, and command sequencing. Firmware may also need different initialization or calibration settings for another member of the family. A footprint match is only the first step in establishing replacement compatibility.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer product information identifies an industrial-grade ADC but does not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Compliance fields remain unknown until confirmed from the manufacturer documentation.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-18 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ADS1253EG4 datasheet ADS1253EG4 specifications ADS1253EG4 pinout ADS1253EG4 datasheet pdf ADS1253EG4 equivalent ADS1253EG4 replacement ADS1253EG4 vs ADS1254E ADS1253EG4 price ADS1253EG4 stock Texas Instruments ADS1253EG4 ADS1253 24 bit ADC ADS1253 16-SSOP pinout

متعلقہ اجزاء اور اصطلاحات

Texas Instruments ADS1253EG4 ADS1253 ADS1254E ADS1240E ADS1251UG4 ADS1256IDBR ADS1252E ADS1255E analog-to-digital converter delta-sigma ADC sigma-delta ADC data-converter IC precision ADC 24-bit resolution 20-kSPS conversion rate differential input SPI-compatible serial interface single-supply ADC SSOP-16 surface-mount package load-cell measurement strain-gauge instrumentation industrial pressure sensing battery-cell monitoring
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں