Microchip Technology

ATF16V8BQL-25PC - 25ns Low-Power 8-Macrocell EE PLD | Microchip

MPN: ATF16V8BQL-25PC ✗ پایان تولید
5 V Vdss 5 mA typical Id 20-PDIP Package
حداقل سفارش: 1 |

ATF16V8BQL-25PC نمای کلی

The Microchip Technology ATF16V8BQL-25PC is a low-power, electrically erasable programmable logic device with 8 macrocells, up to 16 inputs, 8 configurable I/O outputs, and a 25 ns propagation delay. It operates from a 5 V supply and is packaged in a 20-pin PDIP for through-hole PCB designs.

An electrically erasable PLD is a user-programmable logic semiconductor that stores its configuration in nonvolatile EEPROM rather than in external switches or mask-programmed logic. The ATF16V8B family provides a superset of the generic 16R8 architecture and can directly replace many 20-pin combinatorial PLDs. Each of its eight outputs is allocated eight product terms, allowing moderately complex sum-of-products logic to be implemented in one package.

The ATF16V8BQL emphasizes low standby power through Input Transition Detection. According to the manufacturer datasheet, its typical standby current is 5 mA, and the device automatically enters its low-power mode when inputs are idle. A 25 ns speed grade supports moderate clock and control-logic requirements, while electrically erasable configuration permits reprogramming without replacing the device.

The device offers three operating modes configured automatically by software: registered, complex combinatorial, and simple combinatorial. These modes support output-register feedback, exclusive-OR structures, and conventional combinational equations. The architecture emulates the industry-standard 20-pin PAL arrangement and provides eight outputs with up to eight product terms per output.

Typical uses include industrial control decoding, legacy peripheral interface logic, address or command translation, and small glue-logic blocks in test, communications, and embedded equipment. ATF16V8BQL-25PC is especially useful when low quiescent consumption is more important than the shortest available propagation delay and a through-hole package is acceptable.

Designers should assign each PLD pin according to the manufacturer pin-description table, provide a stable 5 V supply, and include the required decoupling capacitor close to the supply pins. Legacy PLD designs should also be checked for signal polarity, output enable behavior, unused-pin treatment, and timing margins before production release.

This product record combines the manufacturer's electrical and architectural details with package-specific sourcing guidance, programming considerations, practical design notes, and a careful assessment of drop-in replacement options for the ATF16V8BQL-25PC.

جایگزین‌های drop-in برای ATF16V8BQL-25PC — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

ATF16V8B-25PC

✅ جایگزین مستقیم
📦 20-PDIP
Same 20-PDIP package and 25 ns speed grade, but the ATF16V8B is standard-power while ATF16V8BQL adds quarter-power ITD operation

📋 جایگزین مرجع (خارج از کاتالوگ)

ATF16V8BQL-25PC حداکثر مقادیر مجاز و مشخصات الکتریکی

Device Type Electrically Erasable Programmable Logic Device
Architecture 16V8 with 8 macrocells
Number of Macrocells 8
Maximum Inputs 16 inputs
Number of I/O Outputs 8 I/O
Product Terms per Output 8 product terms
ولتاژ تغذیه 5 V
Propagation Delay 25 ns
Standby Current 5 mA typical
Configuration Technology Electrically Erasable Flash memory
Power-Down Feature Automatic low-power mode through Input Transition Detection
Operating Modes Registered, complex combinatorial, and simple combinatorial
بسته‌بندی 20-PDIP
نوع نصب Through-hole
Logic Family CMOS electrically erasable PLD
Equivalent Gate Count 250 gates
Power Class Quarter and low power

پیکربندی پین ATF16V8BQL-25PC

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
پین 1 CLK — Clock input
پین 2 I/O0 — Configurable input or output
پین 3 I/O1 — Configurable input or output
پین 4 I/O2 — Configurable input or output
پین 5 I/O3 — Configurable input or output
پین 6 I/O4 — Configurable input or output
پین 7 I/O5 — Configurable input or output
پین 8 I/O6 — Configurable input or output
پین 9 I/O7 — Configurable input or output
پین 10 GND — Ground
پین 11 GND — Ground
پین 12 /OE — Active-low output enable
پین 13 I/O7 — Configurable input or output
پین 14 I/O6 — Configurable input or output
پین 15 I/O5 — Configurable input or output
پین 16 I/O4 — Configurable input or output
پین 17 I/O3 — Configurable input or output
پین 18 I/O2 — Configurable input or output
پین 19 I/O1 — Configurable input or output
پین 20 VCC — Positive supply

کاربردهای معمول

ATF16V8BQL-25PC مناسب است برای 6 کاربردs: Industrial Command Decoding, Legacy Peripheral Interface, Address and Command Translation, Test Equipment Control Logic, Low-Power Embedded Glue Logic, Telecom and Communications Interface.

🏭

Industrial Command Decoding

The ATF16V8BQL-25PC fits legacy industrial control boards that decode switches, selectors, and status lines into internal control commands. Eight macrocells, up to 16 inputs, and eight product terms per output provide sufficient capacity for compact sum-of-products decoding, while the 25 ns propagation delay accommodates moderate control-path timing. The 20-PDIP package is straightforward to inspect and replace in through-hole equipment. Its low-power ITD behavior also helps when logic sections remain idle for long periods, although the complete operating-current budget and any required temperature range must be checked against the equipment specification.

🔧

Legacy Peripheral Interface

The ATF16V8BQL-25PC can implement protocol adaptation between a host controller and older peripheral equipment by translating control states, generating enables, or combining asynchronous status inputs. Its electrically erasable configuration supports design revisions without changing the PCB, and its 8 I/O outputs provide flexible use as inputs or outputs. The 25 ns device can bridge many control and handshake signals without excessive propagation delay. Engineers should verify clock-domain relationships, output-enable polarity, and unused input states in the manufacturer datasheet, particularly when adapting the design to a faster host bus.

🖥️

Address and Command Translation

The ATF16V8BQL-25PC is suitable for compact address or command translation between incompatible digital systems. Eight macrocells can hold multiple product-term equations, while the 16V8 organization supports up to 16 inputs and 8 I/O outputs. Electrically erasable Flash technology permits firmware-like logic updates during equipment maintenance, reducing board respin risk. For dependable implementation, validate address overlap, propagate uncertain states through invalid-command outputs, and preserve required setup and hold margins around clocked outputs under the worst-case 25 ns timing scenario.

🔧

Test Equipment Control Logic

The ATF16V8BQL-25PC can consolidate small control functions in legacy test and measurement equipment, such as relay-sequence enable logic, status-latch decoding, or front-panel command gating. The 25 ns propagation delay supports moderate digital control paths, and eight configurable I/O outputs allow the same device to participate in both input decoding and output generation. The through-hole 20-PDIP package also simplifies repair and prototyping. Before integrating it into a measuring chain, keep it out of precision analog paths, provide clean 5 V power, and account for unused-pin and reset-state behavior in the system verification plan.

📱

Low-Power Embedded Glue Logic

The ATF16V8BQL-25PC fits embedded systems that require a small amount of configurable logic beside a primary controller but value low standby consumption. Input Transition Detection automatically moves the PLD toward its low-power state when inputs are idle, and the manufacturer lists a typical standby current of 5 mA. The electrically erasable architecture allows logic updates without a new package, while the 25 ns speed grade addresses routine handshake and control functions. Designers should confirm whether 5 mA meets the product's sleep-current target and should include programming, configuration-security, and in-field update procedures in the production plan.

🌐

Telecom and Communications Interface

The ATF16V8BQL-25PC can implement auxiliary line-state decoding, enable generation, or alarm masking in legacy telecommunications equipment. The 20-pin PAL-compatible architecture is useful when updating established control boards without changing their through-hole footprint, and the 8-macrocell capacity handles compact multi-signal equations. The 25 ns propagation delay is suitable for many supervisory paths rather than high-speed serial datapaths. Layout should keep the PLD away from switching power stages, use a decoupled 5 V rail, and treat all control outputs as potentially asynchronous until the system specifies safe states for power-up and reset conditions.

What is the ATF16V8BQL-25PC?
The ATF16V8BQL-25PC is a Microchip Technology low-power, electrically erasable PLD with 8 macrocells, up to 16 inputs, 8 configurable I/O outputs, and a 25 ns propagation delay. According to the manufacturer datasheet Atmel-0364K-PLD-ATF16V8B-8BQ-8BQL-Datasheet, it uses electrically erasable Flash configuration and Input Transition Detection for automatic low-power operation.
What is the operating voltage of ATF16V8BQL-25PC?
The ATF16V8BQL-25PC operates at 5 V. The manufacturer product page identifies the ATF16V8BQL as a 5 V electrically erasable PLD, while the manufacturer datasheet describes the device's CMOS implementation and low-power architecture. A regulated 5 V rail with local bypass capacitance should be used according to the application guidance in that datasheet.
What are the key specifications of ATF16V8BQL-25PC that engineers should know?
The principal ATF16V8BQL-25PC specifications are 8 macrocells, up to 16 inputs, 8 I/O outputs, a 25 ns propagation delay, 5 V operation, and 5 mA typical standby current. According to the manufacturer datasheet, every output is allocated eight product terms and three operating modes are selected automatically by the programming software.
Where can I download the ATF16V8BQL datasheet PDF?
The ATF16V8BQL datasheet PDF is available from the Microchip Technology document link on this page and from the linked manufacturer datasheet mirrors. The primary document is Atmel-0364K-PLD-ATF16V8B-8BQ-8BQL-Datasheet, which covers the ATF16V8B, ATF16V8BQ, and ATF16V8BQL families, operating modes, AC characteristics, and package information.
Where can I find the ATF16V8BQL-25PC pinout?
The ATF16V8BQL-25PC pinout is defined by the manufacturer datasheet and its 20-PDIP package diagram. Use the pin-description table when assigning clock, feedback, output-enable, I/O, ground, and supply connections. The device uses the industry-standard 20-pin PAL arrangement, but production designs should follow the numbered package drawing rather than relying on a generic PLD diagram.
What can replace the ATF16V8BQL-25PC?
The ATF16V8B-25PC is the closest documented same-family replacement because it uses the same 20-PDIP format and 25 ns speed grade. It differs in low-power behavior: the ATF16V8B is the standard-power family member, whereas the ATF16V8BQL adds quarter-power operation and Input Transition Detection. Verify output-enable polarity, programming architecture, and timing before substitution.
Is ATF16V8BQL-25PC the same as ATF16V8B-25PC?
No. The ATF16V8BQL-25PC and ATF16V8B-25PC share the 20-PDIP package, 5 V supply, 25 ns speed grade, and 8-macrocell architecture, but they belong to different power variants. The ATF16V8BQL provides quarter-power characteristics and Input Transition Detection, while the ATF16V8B is the standard-power ATF16V8B family member.
When should I choose ATF16V8BQL-25PC over ATF16V8B-25PC?
Choose the ATF16V8BQL-25PC when low standby consumption is important and the design can use its Input Transition Detection power-down behavior. Choose the ATF16V8B-25PC when standard-power operation is sufficient. Both are 25 ns devices in a 20-PDIP package, so the decision should be based on the complete power budget, system activity pattern, and programming compatibility.
Is ATF16V8BQL-25PC suitable for industrial control logic?
The ATF16V8BQL-25PC can suit industrial control and legacy interface applications that require modest logic depth, a 25 ns propagation delay, and nonvolatile reprogrammability. Its 8 macrocells and eight product terms per output are appropriate for decoding, command translation, and glue logic. Confirm the operating-temperature requirement against the manufacturer ordering information before release.
How much standby current does ATF16V8BQL-25PC use?
The ATF16V8BQL-25PC has a typical standby current of 5 mA, according to the manufacturer datasheet Atmel-0364K-PLD-ATF16V8B-8BQ-8BQL-Datasheet. Input Transition Detection allows the device to enter low-power mode when the inputs are idle. System power calculations should also include operating current under the intended clock and I/O loading.
What is the best Lattice equivalent for ATF16V8BQL-25PC?
The documented cross-reference candidate GAL16V8D-25LP must be checked for its exact package before it can be called a drop-in replacement. The ATF16V8B family is described as a superset of common 20-pin combinatorial PLD architectures, but package suffix differences can change the physical footprint. Confirm the Lattice pinout, supply requirements, programming method, and timing before approving a substitution.
Where can I buy ATF16V8BQL-25PC and check current stock?
Use the Request a Quote form on this page to request current pricing, stock, minimum order quantity, and lead time for ATF16V8BQL-25PC. Because this is a legacy device, quote confirmation should include the manufacturer name, exact 20-PDIP suffix, date code, and whether any factory-sealed surplus or new inventory is being offered.
What is the price of ATF16V8BQL-25PC?
Current pricing for ATF16V8BQL-25PC should be obtained through the Request a Quote form on this page. The form allows the required quantity, package suffix, and delivery requirements to be stated, which is especially important for an obsolete PLD whose stock may consist of limited new or factory-surplus inventory. Price and availability should be confirmed for each request.
What is the lead time for ATF16V8BQL-25PC?
The current lead time for ATF16V8BQL-25PC should be confirmed through the Request a Quote form on this page. Lead time can vary with inventory type, quantity, and whether the parts are new, factory-sealed, or legacy surplus. For production planning, request a written commitment that identifies the exact MPN and 20-PDIP package suffix.
How do I design the power and decoupling for ATF16V8BQL-25PC?
Power the ATF16V8BQL-25PC from a regulated 5 V supply and place the required bypass capacitor close to its supply and ground pins. The 20-PDIP package is intended for through-hole assembly, so route the power and return conductors to minimize loop area and keep switching-node coupling away from clock and feedback traces. Follow the manufacturer datasheet for the recommended capacitor network.

داده‌های مرجع مهندسی برای ATF16V8BQL-25PC — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose ATF16V8BQL-25PC when maintaining a legacy 20-PDIP design that benefits from quarter-power operation, automatic Input Transition Detection, and a 25 ns speed grade. It is appropriate for compact decoding, address translation, and supervisory glue logic where low idle consumption matters. Choose ATF16V8B-25PC when its standard-power behavior is sufficient and the same 20-PDIP footprint and 25 ns timing are desired. Do not select either device solely from the package drawing: verify programming-file compatibility, registered versus combinational requirements, output-enable polarity, and unused-pin treatment. The GAL16V8D-25LP comparison candidate requires package confirmation because its suffix may identify a surface-mount package rather than the target PDIP footprint. For new designs, a current CPLD or small MCU may provide better software maintenance and availability, but they are not pin-to-pin replacements without a PCB redesign.

مقایسه با جایگزین‌ها

پارامتر این محصول ATF16V8B-25PC
Package 20-PDIP 20-PDIP - same
Brand Microchip Technology Microchip Technology
Product Type Low-power electrically erasable PLD Standard-power electrically erasable PLD
Macrocells 8 8
Maximum Inputs 16 inputs 16 inputs
I/O Outputs 8 I/O 8 I/O
Supply Voltage 5 V 5 V
Propagation Delay 25 ns 25 ns
Power-Down Feature Automatic low-power mode through Input Transition Detection No ATF16V8BQL Input Transition Detection feature

تفاوت‌های کلیدی

  • Lower-power operating variant (در مقابلATF16V8B-25PC)
  • Direct package and timing alignment (در مقابلATF16V8B-25PC)
  • Nonvolatile reprogrammable configuration (در مقابلATF16V8B-25PC)

یادداشت‌های طراحی

Use a regulated 5 V rail and place the manufacturer-recommended bypass capacitor immediately between the VCC and GND pins. Keep the supply and return paths short because the 20-PDIP footprint can support long PCB traces if routing is not constrained. In battery-powered equipment, include the 5 mA typical standby current and operating current in the active and idle power budgets before confirming that the low-power variant provides a worthwhile system-level saving.

Do not treat the ATF16V8B and ATF16V8BQL as identical merely because they share the 16V8 architecture and 20-PDIP package. The ATF16V8BQL includes Input Transition Detection and quarter-power characteristics, while the ATF16V8B is the standard-power member. Before substitution, compare the programmed equations, clock behavior, output-enable polarity, unused-pin treatment, AC timing, and power requirements against the manufacturer datasheet.

Reserve the package pin assignments shown in the manufacturer pin-description table and mark all unused inputs so their electrical state is controlled during programming, reset, and power-up. Route the clock with short geometry and maintain separation from switching-regulator and relay-control traces. Although the propagation-delay grade is 25 ns, edge-rate and crosstalk margin cannot be inferred from that figure alone, so validate the completed board with realistic loading and worst-case supply conditions.

The ATF16V8B architecture emulates a 20-pin PAL arrangement, but a generic PAL pinout is not a substitute for the manufacturer package drawing. Verify whether a design requires registered, complex combinatorial, or simple combinatorial behavior because the operating mode is selected automatically by the programming software. Recheck feedback-product-term allocation and clocked-output constraints during compilation rather than relying on a manual equation conversion.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The ATF16V8B family datasheet includes green-package ordering information, but the manufacturer datasheet excerpt does not establish a specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for this exact legacy MPN.

تاریخ تأیید داده‌ها: 2026-11-11 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

atf16v8bql datasheet atf16v8bql 15pu datasheet atmel atf16v8bql ATF16V8BQL-25PC datasheet ATF16V8BQL-25PC pinout ATF16V8BQL-25PC equivalent ATF16V8BQL-25PC replacement ATF16V8BQL-25PC vs ATF16V8B-25PC ATF16V8BQL 8 macrocell PLD ATF16V8BQL-25PC 20-PDIP ATF16V8BQL-25PC price ATF16V8BQL-25PC stock ATF16V8BQL low power PLD Microchip ATF16V8BQL-25PC

قطعات و اصطلاحات مرتبط

Microchip Technology ATF16V8BQL-25PC ATF16V8BQL ATF16V8B-25PC GAL16V8D-25LP electrically erasable PLD EEPLD programmable logic device complex combinatorial mode simple combinatorial mode registered mode Input Transition Detection ITD electrically erasable Flash memory 8 macrocells 16V8 architecture 20-PDIP DIP package family through-hole technology CMOS 5 V power supply 25 ns propagation delay 5 mA standby current Atmel-0364K-PLD-ATF16V8B-8BQ-8BQL-Datasheet
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ