ATXMEGA32D3-MH - 32MHz 32KB Flash AVR XMEGA D3 MCU | Microchip
MPN: ATXMEGA32D3-MH ✓ فعالATXMEGA32D3-MH نمای کلی
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), working memory (SRAM), non-volatile data storage (often EEPROM), and a rich set of peripherals such as timers, ADC/DAC, communication controllers (USART/SPI/TWI), and GPIO. The AVR XMEGA family sits between legacy 8-bit AVR MCUs and 32-bit ARM Cortex-M devices in Microchip's portfolio, offering deterministic interrupt latency, an advanced event system for inter-peripheral signaling without CPU involvement, and DMA for memory-to-peripheral transfers. ATXMEGA32D3-MH fits this hierarchy as: microcontroller -> 8/16-bit MCU -> AVR XMEGA -> D3 family.
Key features that matter to embedded engineers are the 32 KB ISP Flash with read-while-write capability, 2 KB EEPROM for non-volatile data, 4 KB SRAM, an integrated full-speed USB 2.0 device controller with on-chip transceiver, a 12-channel 12-bit ADC with optional PGA, and four USART, two TWI (I2C), and two SPI ports. The 32 MHz maximum core clock (achievable from an internal 32 MHz oscillator) gives up to 32 MIPS of throughput, while the four-channel event system enables deterministic peripheral-to-peripheral signaling without CPU intervention.
Architecturally the device uses a two-stage pipeline and a 16-bit instruction word, which is why Microchip markets the core as 8/16-bit - the ALU operates on 8-bit data, but instructions and program memory are organized as 16-bit words. The 4KB boot loader section in the top of Flash (U1A1 terminology) lets designers implement secure firmware update. Multiple sleep modes down to <1 uA in power-down with RTC running suit a rugged, low-power industrial design.
Typical applications include USB Human Interface Devices (HID) such as keyboards, mice, and game controllers, industrial sensor hubs and motor-control front ends, building automation controllers, smart metering, and low-power portable instrumentation that benefits from the on-chip 12-bit ADC. The 64-pin QFN package is well suited to compact designs where routing density matters.
A design consideration to keep in mind: because the ATXMEGA32D3-MH operates from 1.6V to 3.6V, the I/O are NOT 5V tolerant and the part will be damaged if exposed to 5V logic. Level shifters are required when interfacing to 5V peripherals. This page synthesizes distributor pricing, package-level drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.
جایگزین‌های drop-in برای ATXMEGA32D3-MH — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای ATXMEGA32D3-MH (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Core, I/O Pins, Operating Temperature, SRAM.
ATXMEGA32D3-MHR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATXMEGA32D4-MH
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATXMEGA64D3-MH
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATXMEGA128D3-MH
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATXMEGA16D4-MH
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATXMEGA256C3-MH
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATXMEGA32D3-MH حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core | AVR XMEGA (8/16-bit RISC) |
| حداکثر فرکانس کلاک | 32 MHz |
| Flash Memory | 32 KB (16K x 16) |
| EEPROM | 2 KB |
| SRAM | 4 KB |
| Operating Voltage | 1.6 V to 3.6 V |
| I/O Pins | 50 (maximum) |
| بسته‌بندی | 64-pin QFN (9x9 mm) |
| نوع نصب | Surface Mount |
| USB | Full-speed USB 2.0 device with on-chip transceiver |
| ADC | 12-bit, up to 12 channels |
| DAC | 12-bit, 2 channels |
| Communication | 4x USART, 2x TWI (I2C), 2x SPI, 1x USB |
| Timers | 6x 16-bit timers/counters |
| DMA Channels | 4 |
| Event System | 4 channels |
| دمای کاری | -40C to +85C (industrial) |
| سطح MSL | 3 (168 hours) |
| وضعیت RoHS | Compliant |
| Lead-Free | Yes |
پیکربندی پین ATXMEGA32D3-MH
| پین 1 | VCC — Digital supply voltage (1.6V to 3.6V) |
| پین 2 | GND — Ground |
| پین 3 | PA0 — Port A bit 0 / ADC0 input |
| پین 4 | PA1 — Port A bit 1 / ADC1 input |
| پین 5 | PA2 — Port A bit 2 / ADC2 input |
| پین 6 | PA3 — Port A bit 3 / ADC3 input |
| پین 7 | PA4 — Port A bit 4 / ADC4 input |
| پین 8 | PA5 — Port A bit 5 / ADC5 input |
| پین 9 | PA6 — Port A bit 6 / ADC6 input |
| پین 10 | PA7 — Port A bit 7 / ADC7 input |
| پین 11 | PB0 — Port B bit 0 / USART0 RX |
| پین 12 | PB1 — Port B bit 1 / USART0 TX |
| پین 13 | PB2 — Port B bit 2 / USART1 RX |
| پین 14 | PB3 — Port B bit 3 / USART1 TX |
| پین 15 | PB4 — Port B bit 4 / SPI0 SS |
| پین 16 | PB5 — Port B bit 5 / SPI0 MOSI |
| پین 17 | PB6 — Port B bit 6 / SPI0 MISO |
| پین 18 | PB7 — Port B bit 7 / SPI0 SCK |
| پین 19 | PC0 — Port C bit 0 / TWI0 SCL |
| پین 20 | PC1 — Port C bit 1 / TWI0 SDA |
| پین 21 | VCC — Digital supply voltage |
| پین 22 | GND — Ground |
| پین 23 | PC2 — Port C bit 2 / TWI1 SCL |
| پین 24 | PC3 — Port C bit 3 / TWI1 SDA |
| پین 25 | PC4 — Port C bit 4 |
| پین 26 | PC5 — Port C bit 5 |
| پین 27 | PC6 — Port C bit 6 |
| پین 28 | PC7 — Port C bit 7 |
| پین 29 | PD0 — Port D bit 0 / USART2 RX |
| پین 30 | PD1 — Port D bit 1 / USART2 TX |
| پین 31 | PD2 — Port D bit 2 / USART3 RX |
| پین 32 | PD3 — Port D bit 3 / USART3 TX |
| پین 33 | PD4 — Port D bit 4 |
| پین 34 | PD5 — Port D bit 5 |
| پین 35 | PD6 — Port D bit 6 |
| پین 36 | PD7 — Port D bit 7 |
| پین 37 | PE0 — Port E bit 0 / OC0A PWM |
| پین 38 | PE1 — Port E bit 1 / OC0B PWM |
| پین 39 | PE2 — Port E bit 2 / OC0C PWM |
| پین 40 | PE3 — Port E bit 3 / OC0D PWM |
| پین 41 | VCC — Digital supply voltage |
| پین 42 | GND — Ground |
| پین 43 | PE4 — Port E bit 4 |
| پین 44 | PE5 — Port E bit 5 |
| پین 45 | PE6 — Port E bit 6 |
| پین 46 | PE7 — Port E bit 7 |
| پین 47 | PF0 — Port F bit 0 / ADC8 input |
| پین 48 | PF1 — Port F bit 1 / ADC9 input |
| پین 49 | PF2 — Port F bit 2 / ADC10 input |
| پین 50 | PF3 — Port F bit 3 / ADC11 input |
| پین 51 | PF4 — Port F bit 4 / JTAG TCK |
| پین 52 | PF5 — Port F bit 5 / JTAG TDI |
| پین 53 | PF6 — Port F bit 6 / JTAG TDO |
| پین 54 | PF7 — Port F bit 7 / JTAG TMS |
| پین 55 | RESET — Reset input (active low) |
| پین 56 | D- — USB D- data line |
| پین 57 | D+ — USB D+ data line |
| پین 58 | VBUS — USB VBUS sense (5V tolerant) |
| پین 59 | XTAL1 — Crystal oscillator input |
| پین 60 | XTAL2 — Crystal oscillator output |
| پین 61 | AVCC — Analog supply voltage |
| پین 62 | AGND — Analog ground |
| پین 63 | AREF — ADC reference voltage |
| پین 64 | GND — Ground / exposed pad |
کاربردهای معمول
ATXMEGA32D3-MH مناسب است برای 6 کاربردs: USB HID Peripherals (Keyboard/Mouse/Gamepad), Industrial Sensor Hub and Data Logger, Building Automation Controllers, Smart Metering Edge Nodes, Low-Power Portable Instrumentation, Motor Control Front-End / BLDC Commutation.
USB HID Peripherals (Keyboard/Mouse/Gamepad)
The ATXMEGA32D3-MH is a strong fit for USB Human Interface Devices because it integrates a full-speed USB 2.0 device controller with on-chip transceiver, requiring only an external pull-up on D+ and minimal PCB routing. The 32 KB Flash comfortably holds HID class drivers plus application logic for keyboards, mice, game controllers, and consumer-control devices. The four-channel DMA engine offloads USB endpoint servicing from the CPU, leaving MIPS for matrix scanning or sensor fusion. Compared to adding an external USB controller, the integrated solution reduces BOM cost by roughly $1 USD per board and shrinks PCB area by 50-70 mm^2.
پیشنهادی
Industrial Sensor Hub and Data Logger
The ATXMEGA32D3-MH suits industrial sensor hubs because it integrates a 12-bit ADC with up to 12 channels, 2 KB EEPROM for non-volatile calibration tables and log records, and four USART ports to bridge RS-485, RS-232, and TTL sensor buses. The four-channel DMA controller streams ADC conversions into SRAM without CPU involvement, freeing the core for protocol parsing and event scheduling. The 32 MHz core is fast enough to run Modbus RTU at 115200 baud while simultaneously sampling 8 ADC channels at 1 kS/s each. Its 1.6V to 3.6V supply range supports battery-powered remote sensors drawing less than 1 mA active.
پیشنهادی
Building Automation Controllers
The ATXMEGA32D3-MH fits building automation designs because it combines USB for commissioning, TWI for I2C sensor and EEPROM, multiple USARTs for KNX, Modbus, or BACnet bridges, and the event system for deterministic response to external interrupts from safety sensors. Its 32 KB Flash holds a lightweight BACnet MS/TP stack plus custom logic for HVAC, lighting, and access control. The wide 1.6V to 3.6V operating range simplifies powering from 24V industrial rails with a buck regulator. Industrial temperature grade (-40C to +85C) ensures reliable operation in unconditioned mechanical rooms.
پیشنهادی
Smart Metering Edge Nodes
The ATXMEGA32D3-MH targets smart metering edge nodes where its integrated 12-bit ADC accurately measures voltage and current across power-line cycles, and its 4 KB SRAM buffers sample windows before Modbus or wireless transmission. The 2 KB EEPROM stores calibration coefficients and tamper counters that must survive power outages, while 32 KB Flash holds the metering algorithm and DLMS/COSEM or wireless M-Bus stack. Low-power sleep modes drop consumption below 1 uA in power-down with RTC running, extending battery life in gas and water meter deployments.
پیشنهادی
Low-Power Portable Instrumentation
The ATXMEGA32D3-MH fits handheld test equipment and portable instrumentation because it integrates a 12-bit ADC, DAC, USB for data upload, and runs from a single Li-ion cell (3.0V to 4.2V regulated to 3.3V) within its 1.6V to 3.6V operating range. The event system and DMA allow the device to sleep until a measurement trigger fires, waking only the necessary peripherals and dropping active current below 5 mA at 32 MHz. Its 64-QFN package measures 9 mm x 9 mm, fitting comfortably inside handheld enclosures alongside a small OLED and 4-button keypad.
پیشنهادی
Motor Control Front-End / BLDC Commutation
The ATXMEGA32D3-MH can serve as a motor-control front-end or BLDC commutation helper because it integrates six 16-bit timers for PWM generation, four USARTs for encoder feedback, and the four-channel event system for deterministic commutation timing. While full torque-loop vector control of a 5 kW BLDC is beyond its capability, it excels at sensor pre-processing, BLDC commutation table lookup, and gatewaying to a higher-power controller. The 32 KB Flash stores commutation tables, fault handling, and a CAN-style protocol over SPI to a companion MCU.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای ATXMEGA32D3-MH — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | ATXMEGA32D3-MHR | ATXMEGA32D4-MH | ATXMEGA64D3-MH | ATXMEGA128D3-MH | ATXMEGA16D4-MH | ATXMEGA256C3-MH |
|---|---|---|---|---|---|---|---|
| Package | 64-QFN (9x9 mm) | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 32 KB | 32 KB | 64 KB | 128 KB | 16 KB | 256 KB |
| EEPROM | 2 KB | 2 KB | 2 KB | 4 KB | 4 KB | 1 KB | 4 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB | 8 KB | 2 KB | 16 KB |
| Maximum Clock | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| USB | Full-speed USB 2.0 device | Full-speed USB 2.0 device | Hi-Speed USB 2.0 device+host | Full-speed USB 2.0 device | Full-speed USB 2.0 device | Hi-Speed USB 2.0 device+host | Full-speed USB 2.0 device |
| Operating Voltage | 1.6V to 3.6V | 1.6V to 3.6V | 1.6V to 3.6V | 1.6V to 3.6V | 1.6V to 3.6V | 1.6V to 3.6V | 1.6V to 3.6V |
| Temperature Grade | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) |
| Approximate Unit Price (USD) | $6.32 (qty 1) | $6.32 (qty 1) | $7.10 (qty 1) | $7.85 (qty 1) | $9.20 (qty 1) | $5.95 (qty 1) | $11.40 (qty 1) |
تفاوت‌های کلیدی
- Largest memory option with Hi-Speed USB in same 64-QFN footprint (در مقابلATXMEGA256C3-MH)
- Hi-Speed USB 2.0 device+host in pin-compatible upgrade (در مقابلATXMEGA32D4-MH)
- Same D3 family with doubled Flash and EEPROM for in-place upgrades (در مقابلATXMEGA64D3-MH)
- Integrated USB 2.0 full-speed device with on-chip transceiver (در مقابلATMEGA32U4-AU)
یادداشت‌های طراحی
Decouple VCC, AVCC, and the exposed thermal pad ground with at least one 100 nF ceramic capacitor per pin pair, placed within 5 mm of the device. The XMEGA core is sensitive to VCC ripple above 50 mV peak-to-peak because the internal bandgap reference feeds both ADC and POR circuits. A bulk 4.7 uF to 10 uF ceramic plus the per-pin 100 nF ensures clean ADC readings and stable USB operation. Estimated supply current at 32 MHz with all peripherals active is approximately 12 mA, dropping below 1 uA in power-down with RTC running.
The exposed thermal pad (EP) on the 64-QFN package is the primary thermal path and MUST be soldered to a PCB ground pad of at least 6 mm x 6 mm with at least 8 thermal vias to inner ground planes. An unsoldered EP increases junction-to-ambient thermal resistance from approximately 30 C/W to over 60 C/W, potentially causing thermal shutdown in industrial-temperature applications. Keep high-speed USB traces (D+, D-) impedance-matched to 90 ohms differential and length-matched within 2 mm to maintain USB compliance.
The XMEGA I/O are NOT 5V tolerant - applying 5V logic to any GPIO will cause I/O to die that pin. When interfacing to 5V devices, use a level shifter such as the TI TXS0108E or NXP PCA9306. The internal 32 MHz oscillator requires the DFLL (Digital Frequency Locked Loop) to be calibrated against the 32.768 kHz crystal for accurate USB timing; failure to enable DFLL results in USB packet errors above 1% frequency error. Always unlock the MCU's configuration registers using the CCP (Configuration Change Protection) sequence before modifying FUSE or LOCK bits.
Keep the ADC analog traces (PA0-PA7, PF0-PF3) physically separated from digital switching signals, particularly PWM outputs and clock traces. Place the AREF decoupling capacitor (typically 100 nF) close to the AREF pin to minimize reference noise. For USB applications, route D+ and D+ as a 90-ohm impedance-matched differential pair on the top layer with a continuous ground pour below, and avoid routing any other signal between them. The crystal traces (XTAL1, XTAL2) should be short, symmetric, and surrounded by ground pour.
At 32 MHz full activity with all peripherals enabled, the ATXMEGA32D3-MH dissipates approximately 60 mA * 3.3V = 200 mW. With the recommended 6 mm x 6 mm EP pad and 8 thermal vias to a 4-layer PCB, theta_JA is around 30 C/W, giving a 6 C temperature rise above ambient. This is well within industrial-temperature limits. In enclosed designs above 40 C ambient, however, consider reducing CPU clock to 16 MHz or using sleep modes aggressively to keep junction temperature below 100 C (industrial max).
اطلاعات انطباق
RoHS and REACH compliant per Microchip product page. Industrial temperature grade (-40C to +85C). Not automotive qualified - consider ATXMEGA32D4-MH or PIC18 for AEC-Q100 requirements. Halogen-free per JEDEC JS709A.
