EFM32TG222F16-D-QFP48 - 32MHz Low-Power MCU | Silicon Labs
MPN: EFM32TG222F16-D-QFP48 ✓ فعالEFM32TG222F16-D-QFP48 نمای کلی
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic into one compact device. The EFM32TG222F16-D-QFP48 belongs to the ARM Cortex-M3 microcontroller hierarchy and uses the Cortex-M3 as its 32-bit instruction-set architecture. Its low-power platform is intended to extend operating time in battery-powered sensors, portable instruments, industrial monitors, and connected embedded products that spend substantial time in low-power states.
The principal features include a maximum 32 MHz processor speed, 16 kB of Flash program memory, 4 kB of SRAM, 37 digital I/O pins, and two 16-bit timers. The architecture also provides integrated analog and communication resources to reduce the number of external components required. Silicon Labs identifies the device as suitable for energy-sensitive applications by combining low active consumption with sleep-mode operation and rapid wake-up capability.
The Tiny Gecko platform uses energy-management techniques to manage switching between active and low-energy states. Published family information identifies consumption as low as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode. These characteristics make it possible to balance processing throughput against duty-cycled energy use, particularly in systems that wake periodically to acquire data and then return to sleep.
Typical uses include battery-powered environmental sensors, industrial condition-monitoring nodes, compact health and wellness devices, portable measurement equipment, and low-power IoT endpoints. In these systems, the microcontroller can collect measurements through its integrated peripherals, process them locally, and enter a low-power state between events. Its 37 digital I/O pins also provide flexibility for sensors, indicators, switches, and peripheral control signals.
A critical design consideration is supply-voltage and decoupling layout. Keep the 3.3 V power rail within the specified 1.98 V to 3.8 V range, place the required bypass capacitor close to the supply pins, and route return currents efficiently. PCB exposure and pad geometry should also be checked against the manufacturer’s 48-pin TQFP footprint and land pattern before release.
This page combines the manufacturer specifications with practical application guidance, package details, sourcing information, and a structured comparison of same-family drop-in candidates. It is intended to help engineers assess memory, package, peripheral compatibility, and low-power behavior before committing the EFM32TG222F16-D-QFP48 to a PCB design.
جایگزینهای drop-in برای EFM32TG222F16-D-QFP48 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای EFM32TG222F16-D-QFP48 (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Product Type, Series, Digital I/O Pins, Flash Memory.
EFM32TG222F32-D-QFP48
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EFM32TG222F16-QFP48
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EFM32ZG222F16-QFP48T
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
EFM32ZG222F32-QFP48
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EFM32TG222F16-D-QFP48 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | ARM Cortex-M3 32-bit microcontroller |
| Processor Core | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 kB |
| RAM | 4 kB |
| Digital I/O Pins | 37 |
| Timers | 2 x 16-bit timers |
| Supply Voltage Range | 1.98 V to 3.8 V |
| بستهبندی | 48-TQFP, 7 mm x 7 mm |
| نوع نصب | Surface mount |
| Stop Mode Current | As low as 0.6 µA |
| Run Mode Current | 150 µA/MHz |
| Architecture | Tiny Gecko low-power platform |
| Processor Architecture | 32-bit ARM Cortex-M3 |
راهنمای پیکربندی پین EFM32TG222F16-D-QFP48 48-tqfp, 7 mm x 7 mm
پیکربندی پین برای EFM32TG222F16-D-QFP48 (پکیج 48-tqfp, 7 mm x 7 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای EFM32TG222F16-D-QFP48.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
EFM32TG222F16-D-QFP48 مناسب است برای 6 کاربردs: Battery-Powered Environmental Sensor Nodes, Industrial Condition-Monitoring Equipment, Portable Health and Wellness Devices, Compact Data Acquisition Instruments, Low-Power IoT Endpoint Controllers, Embedded System Control and Human-Interface Panels.
Battery-Powered Environmental Sensor Nodes
The EFM32TG222F16-D-QFP48 is well suited to compact environmental sensing because its Cortex-M3 core can process measurements locally while the Tiny Gecko platform supports low-power operation between readings. Published family figures include Stop-mode current as low as 0.6 µA and Run-mode current of approximately 150 µA/MHz, allowing a duty-cycled design to wake, sample, transmit, and sleep. Its 16 kB Flash and 4 kB RAM can hold sensor logic and protocol routines, while 37 digital I/O pins provide flexible connections to sensing and indicator circuits. Designers should keep radio activity and leakage outside the MCU controlled, because final battery life also depends on the sensor, regulator, and board construction.
پیشنهادی
Industrial Condition-Monitoring Equipment
Industrial monitors often combine periodic sensor acquisition, local filtering, status indication, and communications through a compact embedded controller. The EFM32TG222F16-D-QFP48 provides a 32 MHz ARM Cortex-M3 core, 4 kB RAM, 16 kB Flash, and 37 digital I/O pins for these tasks without requiring a larger package. Its 1.98 V to 3.8 V operating range supports integration with 3.3 V industrial electronics when transient and tolerance requirements are respected. Two 16-bit timers can support periodic sampling or timing functions. The component is particularly useful when local processing, predictable wake-up behavior, and low standby consumption matter more than maximum flash capacity.
پیشنهادی
Portable Health and Wellness Devices
A wearable or handheld wellness device benefits from local control, compactness, and low energy use. The EFM32TG222F16-D-QFP48 can supervise sensor inputs, drive indicators, and implement device-control logic in a 48-pin TQFP package. Its Cortex-M3 core operates up to 32 MHz, while 16 kB of Flash and 4 kB of RAM are appropriate for compact control firmware rather than large graphical workloads. The manufacturer identifies low-power states and fast wake-up behavior as core platform features, supporting devices that remain active only while measuring or interacting with the user. Compliance with a specific medical standard is not claimed, and additional validation is required for clinical use.
پیشنهادی
Compact Data Acquisition Instruments
The EFM32TG222F16-D-QFP48 can serve as the control processor in a compact measurement instrument that must acquire, filter, and present data from several inputs. Its 37 digital I/O pins offer substantial connectivity for sensors, switches, and status signals, while two 16-bit timers help organize sampling and control events. The 32 MHz Cortex-M3 core provides more arithmetic headroom than an 8-bit controller, and the 4 kB RAM supports short working buffers and communication routines. At the same time, the 16 kB Flash limit makes code size a design consideration. A 3.3 V architecture can simplify rail distribution, provided every attached component also supports that voltage.
پیشنهادی
Low-Power IoT Endpoint Controllers
The EFM32TG222F16-D-QFP48 can act as the local endpoint controller in an IoT product that periodically gathers data and communicates it through a separate radio or network device. Its Tiny Gecko architecture emphasizes energy-saving modes, fast wake-up, and autonomous peripheral operation, while the 16 kB Flash and 4 kB RAM are suitable for lightweight protocol and application routines. The 48-pin TQFP provides more I/O than smaller EFM32 packages without requiring a very large footprint. In a production design, use the low-power states only after confirming wake sources, retention behavior, and peripheral operation in the manufacturer documentation. Total system energy remains dependent on the communications module and power regulator.
پیشنهادی
Embedded System Control and Human-Interface Panels
EFM32TG222F16-D-QFP48-based control panels can combine button handling, indicator control, status feedback, and local supervisory logic. Its 37 digital I/O pins are useful for discrete user-interface signals, while the 32 MHz Cortex-M3 core can coordinate multiple peripheral functions and execute a compact control application. The device's 4 kB RAM is sufficient for many menu, logging, or communication routines, and its 16 kB Flash provides a defined code-storage budget for firmware. Because it is not a display controller, a panel implementation may require external display-driver or interface circuitry. Firmware partitioning and peripheral reassignment should be checked against the exact package pinout before the PCB is released.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای EFM32TG222F16-D-QFP48 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | EFM32TG222F32-D-QFP48 | EFM32TG222F16-QFP48 | EFM32ZG222F16-QFP48T | EFM32ZG222F32-QFP48 |
|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-TQFP (7x7) | 48-TQFP (7x7) | 48-TQFP (7x7) | 48-TQFP | 48-TQFP |
| Flash Memory | 16 kB | 32 kB | 16 kB | 16 kB | 32 kB |
| Product Family | Tiny Gecko | Tiny Gecko | Tiny Gecko | Zigbee/Gecko family | Zigbee/Gecko family |
تفاوتهای کلیدی
- Lower Flash capacity supports cost-sensitive firmware-constrained designs (در مقابلEFM32TG222F32-D-QFP48)
- Exact same-package configuration without the added F32 flash capacity (در مقابلEFM32TG222F16-QFP48)
- More integrated I/O in a 7 mm by 7 mm package (در مقابلEFM32TG210F8-D-QFN32R)
یادداشتهای طراحی
Design the EFM32TG222F16-D-QFP48 around a supply constrained to 1.98 V to 3.8 V. A regulated 3.3 V rail is consistent with the documented operating range, but the regulator must remain within tolerance during startup and load transients. Place the required local bypass capacitance directly beside the supply and ground pins, keep the high-current return path short, and verify the analog supply requirements of every attached peripheral before sharing the rail.
Use the manufacturer’s 48-pin TQFP land pattern and keep signal routing compatible with the exposed perimeter pads. Maintain short connections from decoupling capacitors to the corresponding supply pins, provide an unobstructed ground reference beneath the device where the package drawing permits it, and separate sensitive analog routes from fast digital or switching-node traces. Verify pin numbering on the physical package and assembled PCB because alternate peripheral functions can change by device configuration.
Do not assume that related EFM32TG222 order codes are firmware- and pin-identical. EFM32TG222F32-D-QFP48 doubles Flash from 16 kB to 32 kB, while alternate suffixes may encode package, reel, or temperature information. Before replacing the EFM32TG222F16-D-QFP48, compare the exact ordering table, complete pinout, peripheral map, flash size, startup behavior, and qualification grade. Also check whether the application image and bootloader were built for the target memory configuration.
Use the low-power states only after defining the device’s wake-up behavior. The Tiny Gecko family can reach 0.6 µA in Stop mode, but average system current depends on how often the core wakes, which peripherals remain active, and whether RAM is retained. Measure current at the system rail under realistic sampling intervals. Firmware should disable unused peripherals and choose the lowest state that preserves required wake sources and data retention.
Assign analog and digital functions from the manufacturer pin-description table rather than from package position alone. Multiplexed peripheral signals can move between pins depending on the device configuration, so lock the pin-mux settings before routing the PCB. Keep external sensor inputs away from high-current switching nodes, provide local return paths for analog signals, and follow the manufacturer’s recommended application circuit when conditioning sensitive measurements.
اطلاعات انطباق
The manufacturer and distributor pages identify the device and its electrical characteristics but do not explicitly state the requested compliance statuses. No compliance qualification is assumed.