Silicon Labs

EFM32TG222F16-D-QFP48 - 32MHz Low-Power MCU | Silicon Labs

MPN: EFM32TG222F16-D-QFP48 ✓ Hoạt động
1.98 V to 3.8 V Vdss As low as 0.6 µA Id 48-TQFP, 7 mm x 7 mm Package 32 MHz Speed 16 kB Memory
MOQ: 1 |

EFM32TG222F16-D-QFP48 Tóm tắt

The Silicon Labs EFM32TG222F16-D-QFP48 is a 32 MHz ARM Cortex-M3 microcontroller with 16 kB Flash, 4 kB RAM, 37 digital I/O pins, and a 48-pin TQFP package. Its operating supply range is 1.98 V to 3.8 V. The device is designed around the Tiny Gecko low-power architecture, combining fast wake-up behavior, energy-saving modes, and autonomous peripheral operation for energy-sensitive embedded systems.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic into one compact device. The EFM32TG222F16-D-QFP48 belongs to the ARM Cortex-M3 microcontroller hierarchy and uses the Cortex-M3 as its 32-bit instruction-set architecture. Its low-power platform is intended to extend operating time in battery-powered sensors, portable instruments, industrial monitors, and connected embedded products that spend substantial time in low-power states.

The principal features include a maximum 32 MHz processor speed, 16 kB of Flash program memory, 4 kB of SRAM, 37 digital I/O pins, and two 16-bit timers. The architecture also provides integrated analog and communication resources to reduce the number of external components required. Silicon Labs identifies the device as suitable for energy-sensitive applications by combining low active consumption with sleep-mode operation and rapid wake-up capability.

The Tiny Gecko platform uses energy-management techniques to manage switching between active and low-energy states. Published family information identifies consumption as low as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode. These characteristics make it possible to balance processing throughput against duty-cycled energy use, particularly in systems that wake periodically to acquire data and then return to sleep.

Typical uses include battery-powered environmental sensors, industrial condition-monitoring nodes, compact health and wellness devices, portable measurement equipment, and low-power IoT endpoints. In these systems, the microcontroller can collect measurements through its integrated peripherals, process them locally, and enter a low-power state between events. Its 37 digital I/O pins also provide flexibility for sensors, indicators, switches, and peripheral control signals.

A critical design consideration is supply-voltage and decoupling layout. Keep the 3.3 V power rail within the specified 1.98 V to 3.8 V range, place the required bypass capacitor close to the supply pins, and route return currents efficiently. PCB exposure and pad geometry should also be checked against the manufacturer’s 48-pin TQFP footprint and land pattern before release.

This page combines the manufacturer specifications with practical application guidance, package details, sourcing information, and a structured comparison of same-family drop-in candidates. It is intended to help engineers assess memory, package, peripheral compatibility, and low-power behavior before committing the EFM32TG222F16-D-QFP48 to a PCB design.

Bộ thay thế dễ dàng lắp đặt cho EFM32TG222F16-D-QFP48 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EFM32TG222F16-D-QFP48 (cùng hình factor và footprint) — khác nhau ở Package, Product Type, Series, Digital I/O Pins, Flash Memory.

Silicon Labs
Package: 48-TQFP (7 x 7 mm)
Product Type: 32-bit ARM Cortex-M3 microcontroller
Series: Tiny Gecko
So sánh với EFM32TG222F16-D-QFP48 →
Silicon Labs
Package: 48-pin TQFP, 7 mm × 7 mm
Product Type: 32-bit ARM Cortex-M3 microcontroller
Series: EFM32 Tiny Gecko
So sánh với EFM32TG222F16-D-QFP48 →
Silicon Labs
Package: 48-TQFP (7 x 7 mm)
Product Type: 32-bit ARM Cortex-M0+ microcontroller
Series: EFM32 Zero Gecko
So sánh với EFM32TG222F16-D-QFP48 →

EFM32TG222F32-D-QFP48

✅ Drop-In
Silicon Labs
📦 48-TQFP (7x7)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · 32 MHz · 32 kB · 4 kB · 37 pins · 2 × 16-bit timers · 1.98 V to 3.8 V

Liên hệ để biết giá

Xem tài liệu →

EFM32TG222F16-QFP48

✅ Drop-In
Silicon Labs
📦 48-TQFP (7x7)
32-bit ARM Cortex-M3 microcontroller · Tiny Gecko · 32 MHz · 16 kB · 16K x 8 bits · 4 kB · 37 pins · 2 x 16-bit timers

Liên hệ để biết giá

Xem tài liệu →

EFM32ZG222F16-QFP48T

✅ Drop-In
📦 48-TQFP (7x7)
Flash remains 16 kB and CPU remains 32 MHz, while the device family and peripheral configuration differ by an unquantified amount

📋 Tham chiếu thay thế (không có trong danh mục)

EFM32ZG222F32-QFP48

✅ Drop-In
Silicon Labs
📦 48-TQFP (7x7)
32-bit ARM Cortex-M0+ microcontroller · EFM32 Zero Gecko · 24 MHz · 32 kB · 4 kB · 37 · 2 x 16-bit timers · 1.98 V to 3.8 V

Liên hệ để biết giá

Xem tài liệu →

EFM32TG222F16-D-QFP48 Tỷ lệ tối đa & tính chất điện

Product Type ARM Cortex-M3 32-bit microcontroller
Processor Core ARM Cortex-M3
Maximum CPU Frequency 32 MHz
Flash Memory 16 kB
RAM 4 kB
Digital I/O Pins 37
Timers 2 x 16-bit timers
Supply Voltage Range 1.98 V to 3.8 V
Hộp 48-TQFP, 7 mm x 7 mm
Kiểu lắp đặt Surface mount
Stop Mode Current As low as 0.6 µA
Run Mode Current 150 µA/MHz
Architecture Tiny Gecko low-power platform
Processor Architecture 32-bit ARM Cortex-M3

Hướng dẫn cấu hình chân EFM32TG222F16-D-QFP48 48-tqfp, 7 mm x 7 mm

Cấu hình chân cho EFM32TG222F16-D-QFP48 (48-tqfp, 7 mm x 7 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 48-tqfp, 7 mm x 7 mm cho EFM32TG222F16-D-QFP48

Không có dữ liệu chân cụ thể sẵn có cho EFM32TG222F16-D-QFP48.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

EFM32TG222F16-D-QFP48 phù hợp cho 6 Áp dụngs: Battery-Powered Environmental Sensor Nodes, Industrial Condition-Monitoring Equipment, Portable Health and Wellness Devices, Compact Data Acquisition Instruments, Low-Power IoT Endpoint Controllers, Embedded System Control and Human-Interface Panels.

🧩

Battery-Powered Environmental Sensor Nodes

The EFM32TG222F16-D-QFP48 is well suited to compact environmental sensing because its Cortex-M3 core can process measurements locally while the Tiny Gecko platform supports low-power operation between readings. Published family figures include Stop-mode current as low as 0.6 µA and Run-mode current of approximately 150 µA/MHz, allowing a duty-cycled design to wake, sample, transmit, and sleep. Its 16 kB Flash and 4 kB RAM can hold sensor logic and protocol routines, while 37 digital I/O pins provide flexible connections to sensing and indicator circuits. Designers should keep radio activity and leakage outside the MCU controlled, because final battery life also depends on the sensor, regulator, and board construction.

🏭

Industrial Condition-Monitoring Equipment

Industrial monitors often combine periodic sensor acquisition, local filtering, status indication, and communications through a compact embedded controller. The EFM32TG222F16-D-QFP48 provides a 32 MHz ARM Cortex-M3 core, 4 kB RAM, 16 kB Flash, and 37 digital I/O pins for these tasks without requiring a larger package. Its 1.98 V to 3.8 V operating range supports integration with 3.3 V industrial electronics when transient and tolerance requirements are respected. Two 16-bit timers can support periodic sampling or timing functions. The component is particularly useful when local processing, predictable wake-up behavior, and low standby consumption matter more than maximum flash capacity.

💊

Portable Health and Wellness Devices

A wearable or handheld wellness device benefits from local control, compactness, and low energy use. The EFM32TG222F16-D-QFP48 can supervise sensor inputs, drive indicators, and implement device-control logic in a 48-pin TQFP package. Its Cortex-M3 core operates up to 32 MHz, while 16 kB of Flash and 4 kB of RAM are appropriate for compact control firmware rather than large graphical workloads. The manufacturer identifies low-power states and fast wake-up behavior as core platform features, supporting devices that remain active only while measuring or interacting with the user. Compliance with a specific medical standard is not claimed, and additional validation is required for clinical use.

🔧

Compact Data Acquisition Instruments

The EFM32TG222F16-D-QFP48 can serve as the control processor in a compact measurement instrument that must acquire, filter, and present data from several inputs. Its 37 digital I/O pins offer substantial connectivity for sensors, switches, and status signals, while two 16-bit timers help organize sampling and control events. The 32 MHz Cortex-M3 core provides more arithmetic headroom than an 8-bit controller, and the 4 kB RAM supports short working buffers and communication routines. At the same time, the 16 kB Flash limit makes code size a design consideration. A 3.3 V architecture can simplify rail distribution, provided every attached component also supports that voltage.

🌐

Low-Power IoT Endpoint Controllers

The EFM32TG222F16-D-QFP48 can act as the local endpoint controller in an IoT product that periodically gathers data and communicates it through a separate radio or network device. Its Tiny Gecko architecture emphasizes energy-saving modes, fast wake-up, and autonomous peripheral operation, while the 16 kB Flash and 4 kB RAM are suitable for lightweight protocol and application routines. The 48-pin TQFP provides more I/O than smaller EFM32 packages without requiring a very large footprint. In a production design, use the low-power states only after confirming wake sources, retention behavior, and peripheral operation in the manufacturer documentation. Total system energy remains dependent on the communications module and power regulator.

📺

Embedded System Control and Human-Interface Panels

EFM32TG222F16-D-QFP48-based control panels can combine button handling, indicator control, status feedback, and local supervisory logic. Its 37 digital I/O pins are useful for discrete user-interface signals, while the 32 MHz Cortex-M3 core can coordinate multiple peripheral functions and execute a compact control application. The device's 4 kB RAM is sufficient for many menu, logging, or communication routines, and its 16 kB Flash provides a defined code-storage budget for firmware. Because it is not a display controller, a panel implementation may require external display-driver or interface circuitry. Firmware partitioning and peripheral reassignment should be checked against the exact package pinout before the PCB is released.

What is the EFM32TG222F16-D-QFP48?
The EFM32TG222F16-D-QFP48 is a 32 MHz ARM Cortex-M3 microcontroller with 16 kB of Flash, 4 kB of RAM, 37 digital I/O pins, and two 16-bit timers. According to the Silicon Labs device page, it uses the Tiny Gecko low-power platform and is packaged in a 48-pin TQFP measuring 7 mm by 7 mm. It is intended for compact embedded systems requiring 32-bit processing, mixed analog and digital control, and energy-efficient operation.
What is the operating voltage range of the EFM32TG222F16-D-QFP48?
The EFM32TG222F16-D-QFP48 operates from 1.98 V to 3.8 V. The same range is identified in the manufacturer and distributor specification listings, making a regulated 3.3 V rail a natural operating point for many designs. The PCB must maintain this range during startup, transients, and normal load changes. Check the manufacturer pin and power documentation before assigning analog, digital, and ground connections.
How much Flash and RAM does the EFM32TG222F16-D-QFP48 have?
The EFM32TG222F16-D-QFP48 provides 16 kB of Flash memory and 4 kB of RAM. The manufacturer describes the Flash as 16K x 8, while its product summary identifies two 16-bit timers and 37 digital I/O pins. This memory combination suits small control systems, sensor nodes, and compact accessories where a separate external memory device would add cost and board area.
Where can I download the EFM32TG222F16-D-QFP48 datasheet PDF?
The official EFM32TG222F16-D-QFP48 product page is the primary source for the device datasheet and specification tables. A manufacturer-hosted PDF is also available through the listed PDF datasheet route at pdf.digi-electronics.com. For design release, use the Silicon Labs product page and manufacturer datasheet for pin definitions, electrical limits, package drawings, and recommended application circuits.
Where can I find the EFM32TG222F16-D-QFP48 pinout?
Use the pin-description table and package drawing in the manufacturer datasheet for the authoritative EFM32TG222F16-D-QFP48 pinout. The device uses a 48-pin TQFP package, and its complete numbered pin list is not reproduced on this page. When assigning tracks, verify power pins, ground pins, debug signals, reset behavior, and alternate peripheral functions against the exact ordering code before fabrication.
Why is the EFM32TG222F16-D-QFP48 suitable for low-power designs?
The EFM32TG222F16-D-QFP48 combines a 32 MHz ARM Cortex-M3 core with Tiny Gecko energy-management features, fast wake-up behavior, and low-power operating states. Family information identifies consumption as low as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. These figures support duty-cycled operation in battery-powered sensors where the system spends much of its time sleeping.
What applications are suitable for the EFM32TG222F16-D-QFP48?
The EFM32TG222F16-D-QFP48 fits battery-powered environmental sensors, industrial monitoring nodes, portable measurement equipment, health and wellness products, and compact IoT endpoints. Its 37 digital I/O pins support sensors, switches, indicators, and control signals, while 16 kB of Flash and 4 kB of RAM accommodate embedded firmware. The principal selection criterion is whether the application can operate within its 1.98 V to 3.8 V supply range.
What is the difference between EFM32TG222F16-D-QFP48 and EFM32TG222F32-D-QFP48?
The principal documented difference is Flash capacity: EFM32TG222F16-D-QFP48 has 16 kB, while EFM32TG222F32-D-QFP48 has 32 kB, a 16 kB or 100% increase. Both use the EFM32TG222 48-pin TQFP family and provide 4 kB of RAM, 37 digital I/O pins, two 16-bit timers, and a maximum CPU speed of 32 MHz. Choose the F32 part when firmware storage is the limiting factor.
When should I choose the EFM32TG222F16-D-QFP48 over another EFM32TG222 variant?
Choose the EFM32TG222F16-D-QFP48 when a design needs 16 kB of Flash, 4 kB of RAM, 37 digital I/O pins, and a 48-pin TQFP without requiring the additional 16 kB of program memory available in the F32 variant. It is preferable for cost-sensitive or firmware-limited applications, while the F32 version is more appropriate when larger code images, update buffers, or richer application logic are expected.
Is the EFM32TG222F16-D-QFP48 suitable for battery-powered IoT devices?
Yes, the EFM32TG222F16-D-QFP48 is suitable for battery-powered IoT devices when the workload fits within 16 kB of Flash and 4 kB of RAM. Its Stop-mode consumption can reach 0.6 µA, while Run-mode consumption is approximately 150 µA/MHz according to published Tiny Gecko family information. Actual battery life also depends on sensor duty cycle, radio activity, leakage, regulator efficiency, and board-level standby losses.
What is the best drop-in replacement for the EFM32TG222F16-D-QFP48?
The closest same-footprint replacement depends on firmware requirements. EFM32TG222F32-D-QFP48 preserves the 48-pin TQFP, 32 MHz core, 4 kB RAM, and 37 I/O configuration while increasing Flash from 16 kB to 32 kB. EFM32TG222F16-QFP48 is also a listed family configuration. Confirm the manufacturer pinout, peripheral set, firmware image compatibility, and qualification requirements before approving any substitution.
Can EFM32TG222F16-D-QFP48 replace EFM32TG222F32-D-QFP48?
The EFM32TG222F16-D-QFP48 can physically fit a design intended for EFM32TG222F32-D-QFP48, but it provides only 16 kB of Flash rather than 32 kB. That is a 50% reduction in program memory and may prevent the original firmware from fitting. Verify the binary size, bootloader assumptions, peripheral configuration, and pin functions before treating it as a drop-in replacement.
Is the EFM32TG222F16-D-QFP48 the same as EFM32TG222F16-QFP48T?
The EFM32TG222F16-D-QFP48 and EFM32TG222F16-QFP48T identify closely related 48-pin TQFP configurations with the same principal device characteristics, including a 32 MHz Cortex-M3 core, 16 kB Flash, and 4 kB RAM. Their ordering suffixes can encode temperature, packaging, and reel or tape-and-reel options. Confirm the full suffix and manufacturer ordering table rather than treating package and temperature codes as interchangeable.
Where can I buy the EFM32TG222F16-D-QFP48 and check its lead time?
Use the Request a Quote form on this page to request current availability, pricing, minimum order quantity, and production lead time for the EFM32TG222F16-D-QFP48. The exact suffix is important when requesting a quotation because related EFM32TG222 devices may differ in temperature grade or reel configuration. Procurement should confirm the package marking, date code, and delivery schedule in the quotation.
What are the key specifications of the EFM32TG222F16-D-QFP48 that engineers should know?
The key EFM32TG222F16-D-QFP48 specifications are a 32 MHz ARM Cortex-M3 core, 16 kB of Flash, 4 kB of RAM, 37 digital I/O pins, two 16-bit timers, and a 1.98 V to 3.8 V supply range. Silicon Labs also identifies Stop-mode consumption as low as 0.6 µA and Run-mode consumption as approximately 150 µA/MHz for the Tiny Gecko family. The physical package is a 48-pin, 7 mm by 7 mm TQFP.
What is the best Silicon Labs equivalent for the EFM32TG222F16-D-QFP48?
The closest documented Silicon Labs options are EFM32TG222F32-D-QFP48 and EFM32TG222F16-QFP48. The F32 version retains the 32 MHz core, 4 kB RAM, 37 I/O pins, and 48-pin TQFP while increasing Flash from 16 kB to 32 kB. The non-D family configuration provides the same stated core, memory, speed, and pin-count headline specifications. Peripheral mapping and ordering suffixes must still be checked before replacement.

Dữ liệu tham khảo kỹ thuật cho EFM32TG222F16-D-QFP48 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the EFM32TG222F16-D-QFP48 when firmware fits within 16 kB of Flash, the design needs 4 kB of RAM and up to 37 digital I/O signals, and a 48-pin TQFP is acceptable. Select EFM32TG222F32-D-QFP48 when the application needs 16 kB more program storage while retaining the same core speed, RAM, and package size. EFM32TG222F16-QFP48 is the closest listed configuration, but its ordering suffix must be checked to ensure the required temperature, packaging, and reel option. For EFM32ZG222F16-QFP48T or EFM32ZG222F32-QFP48, review the complete peripheral map, pin multiplexing, firmware requirements, and qualification conditions before treating either part as a production drop-in replacement.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này EFM32TG222F32-D-QFP48 EFM32TG222F16-QFP48 EFM32ZG222F16-QFP48T EFM32ZG222F32-QFP48
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP 48-TQFP
Flash Memory 16 kB 32 kB 16 kB 16 kB 32 kB
Product Family Tiny Gecko Tiny Gecko Tiny Gecko Zigbee/Gecko family Zigbee/Gecko family

Bảo phân biệt quan trọng

  • Lower Flash capacity supports cost-sensitive firmware-constrained designs (vsEFM32TG222F32-D-QFP48)
  • Exact same-package configuration without the added F32 flash capacity (vsEFM32TG222F16-QFP48)
  • More integrated I/O in a 7 mm by 7 mm package (vsEFM32TG210F8-D-QFN32R)

Ghi chú thiết kế

Design the EFM32TG222F16-D-QFP48 around a supply constrained to 1.98 V to 3.8 V. A regulated 3.3 V rail is consistent with the documented operating range, but the regulator must remain within tolerance during startup and load transients. Place the required local bypass capacitance directly beside the supply and ground pins, keep the high-current return path short, and verify the analog supply requirements of every attached peripheral before sharing the rail.

Use the manufacturer’s 48-pin TQFP land pattern and keep signal routing compatible with the exposed perimeter pads. Maintain short connections from decoupling capacitors to the corresponding supply pins, provide an unobstructed ground reference beneath the device where the package drawing permits it, and separate sensitive analog routes from fast digital or switching-node traces. Verify pin numbering on the physical package and assembled PCB because alternate peripheral functions can change by device configuration.

Do not assume that related EFM32TG222 order codes are firmware- and pin-identical. EFM32TG222F32-D-QFP48 doubles Flash from 16 kB to 32 kB, while alternate suffixes may encode package, reel, or temperature information. Before replacing the EFM32TG222F16-D-QFP48, compare the exact ordering table, complete pinout, peripheral map, flash size, startup behavior, and qualification grade. Also check whether the application image and bootloader were built for the target memory configuration.

Use the low-power states only after defining the device’s wake-up behavior. The Tiny Gecko family can reach 0.6 µA in Stop mode, but average system current depends on how often the core wakes, which peripherals remain active, and whether RAM is retained. Measure current at the system rail under realistic sampling intervals. Firmware should disable unused peripherals and choose the lowest state that preserves required wake sources and data retention.

Assign analog and digital functions from the manufacturer pin-description table rather than from package position alone. Multiplexed peripheral signals can move between pins depending on the device configuration, so lock the pin-mux settings before routing the PCB. Keep external sensor inputs away from high-current switching nodes, provide local return paths for analog signals, and follow the manufacturer’s recommended application circuit when conditioning sensitive measurements.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer and distributor pages identify the device and its electrical characteristics but do not explicitly state the requested compliance statuses. No compliance qualification is assumed.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

EFM32TG222F16-D-QFP48 datasheet EFM32TG222F16-D-QFP48 pinout EFM32TG222F16-D-QFP48 datasheet pdf EFM32TG222F16-D-QFP48 price EFM32TG222F16-D-QFP48 stock Silicon Labs EFM32TG222F16-D-QFP48 EFM32TG222F16-D-QFP48 equivalent EFM32TG222F16-D-QFP48 replacement EFM32TG222F16-D-QFP48 cross reference EFM32TG222F16-D-QFP48 vs EFM32TG222F32-D-QFP48 EFM32TG222F16-D-QFP48 TQFP-48 footprint EFM32TG222F16-D-QFP48 low power application EFM32TG222F16-D-QFP48 supply voltage EFM32TG222F16-D-QFP48 16kB Flash 4kB RAM EFM32TG222F16-D-QFP48 schematic

Các bộ phận và thuật ngữ liên quan

Silicon Labs EFM32TG222F16-D-QFP48 EFM32TG222F32-D-QFP48 EFM32TG222F16-QFP48 EFM32ZG222F16-QFP48T EFM32ZG222F32-QFP48 ARM Cortex-M3 32-bit microcontroller MCU Tiny Gecko Zigbee/Gecko embedded system semiconductor Flash memory RAM TQFP-48 48-pin TQFP surface mount SMD digital I/O 16-bit timer low-power mode Stop mode IoT
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ