Silicon Labs

EFM32TG230F16-D-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs

MPN: EFM32TG230F16-D-QFN64 ✓ فعال
1.98 V to 3.8 V Vdss 150 uA/MHz Id 64-QFN (9 x 9 mm) Package 32 MHz Speed 16 KB (16K x 8) Memory
حداقل سفارش: 1 |

EFM32TG230F16-D-QFN64 نمای کلی

The Silicon Labs EFM32TG230F16-D-QFN64 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating at up to 32 MHz, with 16 KB of Flash memory and a 64-QFN 9 x 9 mm package. It is designed for compact, low-power embedded systems requiring efficient 32-bit processing, autonomous peripherals, analog integration, and rapid low-energy wake-up behavior.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry on one device. The EFM32TG230 belongs to the Tiny Gecko family within the broader ARM Cortex-M microcontroller hierarchy. Its combination of a 32 MHz Cortex-M3 core and low-power operating modes makes it suitable for battery-powered and energy-conscious products where response time and standby consumption are both important.

The EFM32TG230F16-D-QFN64 combines a 32-bit single-core Cortex-M3 processor, 32 MHz operating speed, and 16 KB of Flash with a compact 64-QFN package. The family is documented as consuming as little as 0.6 uA in Stop mode and 150 uA/MHz in Run mode. These figures illustrate the device's suitability for portable instruments, sensor nodes, connected accessories, and industrial modules that spend substantial time in low-energy states.

Autonomous peripherals are a central architectural feature of the Tiny Gecko platform. Hardware-managed timing, sensing, communications, and data movement can allow the processor to remain asleep while peripheral events are handled. Combined with fast wake-up behavior, this architecture can reduce both system latency and active-processing time without requiring a large external sensor or communication subsystem.

Typical embedded uses include low-power sensor interfaces, industrial condition-monitoring nodes, compact control modules, battery-operated accessories, and portable measurement products. The 16 KB Flash capacity is best suited to applications with a moderate firmware footprint, while the 32-bit Cortex-M3 instruction set provides more headroom than an 8-bit MCU for protocol handling, control logic, and concurrent peripheral management.

PCB design should account for the QFN thermal-pad connection, exposed-pad soldering, and decoupling requirements. Place the input and bulk capacitors close to their associated supply pins, preserve a continuous ground path beneath the device, and follow the manufacturer land-pattern and assembly recommendations. Firmware and peripheral configuration should also be checked against the EFM32TG230 datasheet before production release.

This product record combines device specifications, package information, sourcing guidance, and engineering-focused replacement analysis. It also distinguishes a genuine same-package upgrade from broader functional alternatives, helping designers make a controlled migration without confusing similar Cortex-M products with pin-compatible replacements.

جایگزین‌های drop-in برای EFM32TG230F16-D-QFN64 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای EFM32TG230F16-D-QFN64 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Flash Memory, Product Type, Supply Voltage Range, Architecture, Package.

Silicon Labs
Product Type: 32-bit ARM Cortex-M3 Tiny Gecko Microcontroller
Supply Voltage Range: 1.85 V to 3.8 V
Architecture: Tiny Gecko low-power MCU architecture
مقایسه با EFM32TG230F16-D-QFN64 →
Silicon Labs
Flash Memory: 32 KB (32K x 8)
Supply Voltage Range: 1.85 V to 3.8 V
Architecture: 32-bit RISC
مقایسه با EFM32TG230F16-D-QFN64 →

EFM32TG230F32-QFN64

✅ جایگزین مستقیم
Silicon Labs
📦 64-QFN (9x9)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · 32 MHz · ARM Cortex-M3 · 32-bit RISC · 32 KB (32K x 8) · 4 KB · 56 pins

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

EFM32TG230F16-D-QFN64 حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 32-bit ARM Cortex-M3 microcontroller
Microcontroller Family EFM32 Tiny Gecko
Processor Core ARM Cortex-M3
Core Count 1 core
Maximum CPU Frequency 32 MHz
Flash Memory 16 KB (16K x 8)
Supply Voltage Range 1.98 V to 3.8 V
Run Mode Current 150 uA/MHz
Stop Mode Current 0.6 uA
بسته‌بندی 64-QFN (9 x 9 mm)
نوع نصب Surface mount
Output State Retention Supported

راهنمای پیکربندی پین EFM32TG230F16-D-QFN64 64-qfn (9 x 9 mm)

پیکربندی پین برای EFM32TG230F16-D-QFN64 (پکیج 64-qfn (9 x 9 mm)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 64-qfn (9 x 9 mm) برای EFM32TG230F16-D-QFN64

داده پین‌آوت تفصیلی موجود نیست برای EFM32TG230F16-D-QFN64.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

EFM32TG230F16-D-QFN64 مناسب است برای 6 کاربردs: Battery-Powered Sensor Node, Industrial Condition Monitoring, Portable Medical Accessory, Battery Charging Controller, Smart Home Sensor Interface, Compact Data Acquisition Module.

🧩

Battery-Powered Sensor Node

The EFM32TG230F16-D-QFN64 fits compact sensor nodes that combine a 32-bit Cortex-M3 processor with long periods of low-energy operation. Its 16 KB of Flash can hold the acquisition, filtering, and communication-control firmware required for a focused embedded product. Stop mode is specified as low as 0.6 uA, while Run mode is 150 uA/MHz, allowing the firmware to wake for measurements and return to sleep. The main constraint is the relatively modest Flash capacity, which should be checked against the final firmware image.

🏭

Industrial Condition Monitoring

The EFM32TG230F16-D-QFN64 is suitable for compact condition-monitoring modules that sample sensors, apply digital filtering, and report measurements through a low-speed communications interface. Its 32 MHz Cortex-M3 core provides enough arithmetic capability for real-time signal handling without requiring a higher-power processor. A 1.98 V to 3.8 V supply range supports common 2.5 V and 3.3 V designs. The 64-QFN 9 x 9 mm package also preserves board area in distributed sensor nodes.

💊

Portable Medical Accessory

The EFM32TG230F16-D-QFN64 can serve as the controller in a portable medical accessory where low standby energy, compact size, and deterministic control are important. The 32-bit Cortex-M3 core can manage sensor reads, button input, and a local status display, while the Stop-mode specification of 0.6 uA reduces energy use between interactions. Firmware partitioning should account for the 16 KB Flash limit, and the exact ordering code must be reviewed for the intended temperature, reliability, and regulatory environment.

⚡

Battery Charging Controller

The EFM32TG230F16-D-QFN64 is appropriate for small battery-powered charging or power-path modules that require precise state-machine control and low idle consumption. The 32 MHz processor can supervise voltage and current measurements, manage status indicators, and coordinate timing without adding a separate high-power processor. Because the device supports a 1.98 V to 3.8 V operating range, system-level rail design is flexible, but charger safety thresholds, cell chemistry, and thermal protection must remain independent of the MCU where required.

🏠

Smart Home Sensor Interface

The EFM32TG230F16-D-QFN64 fits smart-home sensor interfaces that combine multiple digital inputs with a low-power communications processor. Its autonomous peripheral architecture allows supported events to be handled efficiently, and the Cortex-M3 core provides a conventional firmware environment for protocols and application logic. The 16 KB Flash capacity favors a compact application with tightly controlled code size. If wireless firmware, secure updates, or extensive device management is required, EFM32TG230F32-QFN64 offers the same package and platform with twice the Flash.

🖥️

Compact Data Acquisition Module

The EFM32TG230F16-D-QFN64 supports compact data-acquisition modules that require timing, control, and local processing close to the sensors. Its single-core 32 MHz Cortex-M3 architecture can execute acquisition sequencing and data preparation, while low-energy modes limit consumption between sample events. The 64-QFN 9 x 9 mm package supports dense instrument designs, and the 1.98 V to 3.8 V range accommodates multiple embedded power architectures. The final memory budget must be checked against buffering, calibration, and communications firmware.

What is the EFM32TG230F16-D-QFN64?
The EFM32TG230F16-D-QFN64 is a Silicon Labs 32-bit ARM Cortex-M3 Tiny Gecko microcontroller with a maximum clock frequency of 32 MHz, 16 KB of Flash memory, and a 64-QFN 9 x 9 mm package. The device also includes low-energy operating modes, including Stop mode at 0.6 uA. According to the manufacturer datasheet, the architecture combines autonomous peripherals with fast wake-up behavior for responsive, power-conscious embedded designs.
What are the key specifications of EFM32TG230F16-D-QFN64?
The EFM32TG230F16-D-QFN64 provides a single-core 32 MHz ARM Cortex-M3 processor, 16 KB of Flash, and a 1.98 V to 3.8 V supply range in a 64-QFN package. The Tiny Gecko device is specified at 150 uA/MHz in Run mode and as low as 0.6 uA in Stop mode. Manufacturer documentation also identifies output-state retention and autonomous peripheral operation as notable platform features.
Where can I download the EFM32TG230F16-D-QFN64 datasheet PDF?
The EFM32TG230F16-D-QFN64 datasheet PDF can be downloaded from the manufacturer-linked document at https://www.lcsc.com/datasheet/C3228263.pdf. Use the EFM32TG230 datasheet to confirm the EFM32TG230F16-D-QFN64 ordering code, pin descriptions, electrical limits, memory organization, clock settings, and recommended PCB layout. Product-page links also provide access to related family documentation and support material.
Where can I find the EFM32TG230F16-D-QFN64 pinout?
Use the EFM32TG230 family datasheet and its EFM32TG230F16-D-QFN64 pin-description table to locate every signal and its 64-QFN pin number. Verify power, ground, reset, debug, and analog-capable pins before assigning PCB nets. The exact pin map should also be cross-checked against the package drawing and exposed thermal-pad requirements to prevent errors during schematic capture and footprint generation.
What is the operating voltage of EFM32TG230F16-D-QFN64?
The EFM32TG230F16-D-QFN64 operates from 1.98 V to 3.8 V according to the published device specifications. This range supports 2.5 V and 3.3 V system designs, although the selected regulator, decoupling network, and brownout configuration must support the exact rail used by the product. Confirm operating limits for each I/O and peripheral against the manufacturer datasheet before release.
How much current does EFM32TG230F16-D-QFN64 consume?
The EFM32TG230F16-D-QFN64 family is documented as consuming as little as 0.6 uA in Stop mode and 150 uA/MHz in Run mode. Actual board consumption also includes voltage regulators, sensors, pull networks, and communication hardware. Measure the assembled design at the system rail because duty cycle, clock speed, flash activity, and peripheral loading materially change the total energy consumption.
Is EFM32TG230F16-D-QFN64 suitable for battery-powered devices?
Yes, the EFM32TG230F16-D-QFN64 is suitable for battery-powered equipment because its Tiny Gecko architecture supports low-energy operation and rapid wake-up. Stop mode is specified as low as 0.6 uA, while Run mode is specified at 150 uA/MHz. The MCU should normally remain in a low-energy state between external events, with autonomous peripherals configured to wake the processor only when useful work is ready.
What is the best drop-in replacement for EFM32TG230F16-D-QFN64?
EFM32TG230F32-QFN64 is the closest identified same-family upgrade because it retains the EFM32TG230 device platform, 64-QFN package, 32 MHz Cortex-M3 core, and supply range while increasing Flash from 16 KB to 32 KB. Verify the complete pin list, firmware implications, memory map, and peripheral configuration before substitution. A package match alone does not guarantee that every software and board-level condition is identical.
Can EFM32TG230F32-QFN64 replace EFM32TG230F16-D-QFN64?
The EFM32TG230F32-QFN64 can be evaluated as a same-package, same-family upgrade because it operates at 32 MHz, uses the 64-QFN format, and provides 32 KB of Flash instead of 16 KB. The larger memory does not itself change the package or core architecture. Confirm pin compatibility, boot configuration, peripheral assignments, and firmware constraints against the manufacturer documentation before production use.
When should I choose EFM32TG230F16-D-QFN64 over a 32 KB Flash variant?
Choose the EFM32TG230F16-D-QFN64 when its 16 KB of Flash is sufficient and preserving the exact established memory configuration simplifies qualification or software reuse. Choose EFM32TG230F32-QFN64 when additional firmware storage is valuable and the design can tolerate validation of the different Flash configuration. Both provide the same 32 MHz Cortex-M3 platform and 64-QFN mechanical format.
Is EFM32TG230F16-D-QFN64 suitable for industrial control systems?
The EFM32TG230F16-D-QFN64 is technically suitable for compact industrial control, monitoring, and instrumentation modules because it combines a 32 MHz Cortex-M3 core with low-power modes and a 3.3 V-class supply range. Industrial suitability also depends on the specified temperature grade, qualification status, electromagnetic requirements, and availability of the exact ordering code for the deployment environment.
Where can I buy EFM32TG230F16-D-QFN64 online?
Use the Request a Quote form on this XAIPART product page to request EFM32TG230F16-D-QFN64 availability, lead time, order quantity, and a current quotation. Provide the required quantity, target date, and approved shipping destination so the request can be matched to the correct 64-QFN ordering code and packaging requirements.
What is the price of EFM32TG230F16-D-QFN64?
A current quotation for the EFM32TG230F16-D-QFN64 is available through the Request a Quote form on this page. The form should be used instead of a static price because microcontroller pricing and availability can vary with order quantity, date, packaging, and supply conditions. Include your production forecast and requested delivery schedule for an accurate response.
What is the lead time and stock status for EFM32TG230F16-D-QFN64?
Request current stock status, minimum order quantity, and lead time for EFM32TG230F16-D-QFN64 through the Request a Quote form on this page. Supply commitments should account for your production schedule, required package quantity, approved-source needs, and any date-change notifications. These commercial details are confirmed with each quotation rather than represented by a fixed listing statement.
What programming tools are compatible with EFM32TG230F16-D-QFN64?
The EFM32TG230F16-D-QFN64 uses an ARM Cortex-M3 core and is supported by the EFM32 programming ecosystem, including compatible debug adapters and production programmers. Programming and debugging configurations must match the device family, package, and interface used by the board. Confirm current adapter, software, and device-algorithm support with the relevant tool provider before committing a production programming process.
Is EFM32TG230F16-D-QFN64 RoHS compliant?
The RoHS status of the exact EFM32TG230F16-D-QFN64 ordering code requires confirmation from the manufacturer product or compliance documentation. RoHS status is specific to the manufacturer and package configuration rather than a universal property of every EFM32TG230 device. Request the current material compliance declaration through the Request a Quote form when a formal compliance record is required for procurement or production release.

داده‌های مرجع مهندسی برای EFM32TG230F16-D-QFN64 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose EFM32TG230F16-D-QFN64 when a low-power 32-bit Cortex-M3 controller is required and 16 KB of Flash is sufficient for the final firmware. Its 32 MHz speed, 1.98 V to 3.8 V supply range, Stop-mode current of 0.6 uA, and 64-QFN package suit compact sensor, monitoring, accessory, and control products. Choose EFM32TG230F32-QFN64 when the same-family package and core are desirable but twice the Flash is needed for protocol stacks, updates, logging, or richer application logic. No cross-brand drop-in alternative was confirmed. Other ARM Cortex-M3 devices may offer similar processing capability but require a separate pin, electrical, firmware, and peripheral-function review rather than a drop-in replacement.

مقایسه با جایگزین‌ها

پارامتر این محصول EFM32TG230F32-QFN64
Brand Silicon Labs Silicon Labs
Package 64-QFN (9 x 9 mm) 64-QFN (9 x 9 mm)
Processor Core ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory 16 KB (16K x 8) 32 KB
Run Mode Current 150 uA/MHz 150 uA/MHz
Stop Mode Current 0.6 uA 0.6 uA
Special Features Output state retention and wake-up from Shutoff Mode Autonomous peripherals and energy-saving modes

تفاوت‌های کلیدی

  • Lower Flash configuration supports a fixed-cost target (در مقابلEFM32TG230F32-QFN64)
  • Identical package and CPU speed for controlled evaluation (در مقابلEFM32TG230F32-QFN64)
  • Ultra-low-power platform for battery-oriented designs (در مقابلEFM32TG230F32-QFN64)

یادداشت‌های طراحی

Follow the EFM32TG230 datasheet land pattern for the 64-QFN 9 x 9 mm package, including its exposed thermal pad and the required via arrangement. Place the device-side input, output, and bulk decoupling capacitors as close as practical to their supply pins. Maintain a low-impedance ground plane beneath the package and avoid routing fast or sensitive signals through the exposed-pad region.

Design the 1.98 V to 3.8 V supply path for both active and transient conditions, including processor startup, flash writes, and simultaneous peripheral activity. Confirm that the selected regulator supports the expected load steps and that brownout behavior matches the firmware reset strategy. Place additional bulk energy close enough to the MCU to support transient response without creating excessive input-capacitance concerns.

Do not treat every 64-QFN EFM32 or Cortex-M3 device as a drop-in replacement. The EFM32TG230F32-QFN64 is a controlled same-family candidate because it retains the TG230 platform, core speed, and package, but its Flash map and device configuration still require review. Recheck the complete pin list, exposed-pad connection, clock setup, boot pins, debugger interface, and firmware image before substituting it in production hardware.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The exact ordering code's compliance declarations were not stated in the available product records. Obtain current manufacturer compliance documentation before production release.

تاریخ تأیید داده‌ها: 2026-11-19 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

EFM32TG230F16-D-QFN64 datasheet EFM32TG230F16-D-QFN64 pinout EFM32TG230F16-D-QFN64 datasheet pdf EFM32TG230F16-D-QFN64 specifications EFM32TG230F16-D-QFN64 price EFM32TG230F16-D-QFN64 stock Silicon Labs EFM32TG230F16-D-QFN64 EFM32TG230F16-D-QFN64 equivalent EFM32TG230F16-D-QFN64 replacement EFM32TG230F16-D-QFN64 vs EFM32TG230F32-QFN64 EFM32TG230F16-D-QFN64 application circuit EFM32TG230F16 64-QFN footprint

قطعات و اصطلاحات مرتبط

Silicon Labs EFM32TG230F16-D-QFN64 EFM32TG230F32-QFN64 EFM32TG230 Tiny Gecko ARM Cortex-M3 32-bit microcontroller embedded microcontroller microcontroller semiconductor Flash memory 16 KB Flash 32 MHz Stop mode Run mode 0.6 uA Stop current 150 uA/MHz Run current 1.98 V to 3.8 V 64-QFN QFN family surface mount autonomous peripherals output state retention industrial sensor monitoring battery-powered embedded control
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ