EP2C15AF256C6N - 14,448-Cell 500 MHz FPGA | Altera
MPN: EP2C15AF256C6N ✓ فعالEP2C15AF256C6N نمای کلی
A field-programmable gate array is a reconfigurable digital semiconductor used to implement logic, state machines, interfaces, and parallel processing functions. The broader hierarchy is FPGA and CPLD, then programmable-logic semiconductor. Unlike fixed-function logic, an FPGA allows its hardware behavior to be changed through a configuration bitstream after manufacture, shortening development cycles and supporting product variants through a common PCB design.
The EP2C15AF256C6N combines 14,448 logic elements with 152 user I/O in a surface-mount 256-LBGA package. Its listed 500 MHz operating frequency supports demanding clocked logic, while 1.2 V core operation suits modern low-voltage digital systems. The commercial temperature grade is listed as 0 to 85 degrees Celsius, making the device appropriate for industrial equipment where operating conditions stay within that range.
Cyclone II devices use configurable logic elements, embedded memory, and programmable interconnect resources to support embedded processing and control architectures. The EP2C15 designation identifies the device family and resource level, while AF256 identifies the 256-ball package. Programming and board bring-up should follow the Cyclone II device-family data sheet and the exact pin-assignment table for this orderable part.
Typical applications include industrial control, communications infrastructure, instrumentation, consumer electronics, embedded control, and parallel signal processing. Its combination of 152 I/O and 14,448 logic elements is useful when a design needs many peripheral connections but does not justify the resources or cost of a much larger FPGA.
The primary layout consideration is the 256-LBGA land pattern. Follow the manufacturer pin-assignment, escape-routing, and decoupling guidance rather than relying on a generic BGA layout. Confirm that the PCB design has adequate fanout from the fine-pitch balls to the component power, ground, configuration, clock, and user-I/O routing layers.
This product record combines the device's key architecture, package, frequency, logic-cell, I/O, temperature, and sourcing information with practical FPGA design guidance and a clearly documented drop-in alternative assessment for engineers evaluating lifecycle and board-compatibility decisions.
جایگزینهای drop-in برای EP2C15AF256C6N — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای EP2C15AF256C6N (همان فرمفاکتور و فوتپرینت) — متفاوت در Device Type, Logic Elements, Number of User I/O, Package Type, RoHS Status.
EP2C15AF256C6
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
EP2C15AF256C6N حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Cyclone II Field Programmable Gate Array (FPGA) |
| Logic Elements | 14,448 cells |
| User I/O Count | 152 I/O |
| Maximum Operating Frequency | 500 MHz |
| Core Supply Voltage | 1.2 V |
| Package Type | 256-LBGA |
| Total Package Pins | 256 pins |
| نوع نصب | Surface Mount |
| دمای کاری | 0 to 85 C |
| Manufacturer | Altera |
| Device Family | Cyclone II |
| Programmable Logic Type | FPGA |
راهنمای پیکربندی پین EP2C15AF256C6N 256 pins
پیکربندی پین برای EP2C15AF256C6N (پکیج 256 pins). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای EP2C15AF256C6N.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
EP2C15AF256C6N مناسب است برای 6 کاربردs: Industrial PLC Control, Network Interface Equipment, Instrumentation and Data Acquisition, Video and Image Processing, Communications Gateway, Consumer and Embedded Control.
Industrial PLC Control
EP2C15AF256C6N fits compact programmable-logic controllers because 14,448 logic elements can implement sequencing, timers, interlocks, and machine-state logic while 152 user I/O connect field signals. The 500 MHz maximum operating frequency provides margin for parallel control paths, and the 1.2 V core supply aligns with modern digital power architectures. In a controller, the FPGA can execute deterministic acquisition and control logic beside communication interfaces while remaining within the listed 0 to 85 degrees Celsius range.
پیشنهادی
Network Interface Equipment
EP2C15AF256C6N is suitable for protocol bridging, packet processing, and network-interface control where parallel logic and numerous external connections are required. Its 14,448 logic elements support stateful datapaths, while 152 user I/O can connect transceivers, status signals, clocks, and control registers. The 500 MHz device speed helps implement parallel stages efficiently. Designers should use the Cyclone II I/O and clock documentation to establish voltage compatibility, timing margins, and bank constraints.
پیشنهادی
Instrumentation and Data Acquisition
EP2C15AF256C6N can implement digital measurement, sampling control, trigger logic, and instrument-control functions in a compact embedded architecture. The 152 I/O support parallel sensor connections and control signals, while 14,448 logic elements accommodate timing, filtering, and data-format conversion functions. Its listed 500 MHz maximum frequency is useful for clocked acquisition pipelines, although achievable system timing depends on the selected speed grade, external memory interface, pin assignments, and routing. Analog front-end design remains separate from the FPGA's digital core.
پیشنهادی
Video and Image Processing
EP2C15AF256C6N can support parallel image preprocessing, pixel transport, test-pattern generation, and display timing when the design fits its 14,448 logic elements and 152 I/O. Its 500 MHz maximum operating frequency enables clocked pixel pipelines, while the 1.2 V core supply simplifies integration with contemporary logic levels. Video timing, external memory, and high-speed interface constraints must be evaluated against the device-family data sheet. The FPGA is best suited to moderate-resolution parallel processing rather than unrestricted high-bandwidth video engines.
پیشنهادی
Communications Gateway
EP2C15AF256C6N is appropriate for small protocol gateways that must bridge several serial or parallel interfaces while performing buffering, framing, and routing in hardware. The 14,448 logic elements support concurrent fixed-function pipelines, and 152 I/O provide flexible connectivity for transceivers and control logic. At a listed maximum operating frequency of 500 MHz, the device can meet demanding packet-processing clock rates. Final timing closure requires the actual speed grade, clock tree, I/O standards, board topology, and configuration method.
پیشنهادی
Consumer and Embedded Control
EP2C15AF256C6N supports cost-sensitive products that need configurable control logic, user interfaces, and peripheral coordination without a dedicated microcontroller for every function. Its 14,448 logic elements and 152 I/O can consolidate timers, state machines, display control, and communication sequencing, while the 256-LBGA supports dense board layouts. The 1.2 V core operation and 0 to 85 degrees Celsius specification suit controlled consumer and embedded environments. Firmware and configuration storage requirements must be planned alongside the logic design.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای EP2C15AF256C6N — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | EP2C15AF256C6 |
|---|---|---|
| Manufacturer | Altera | Altera |
| Package | 256-LBGA | 256-LBGA |
| Device Family | Cyclone II | Cyclone II |
تفاوتهای کلیدی
- Compact 14,448-cell implementation resource (در مقابلEP2C15AF256C6)
- High user-interface connectivity (در مقابلEP2C15AF256C6)
- Defined 500 MHz device speed (در مقابلEP2C15AF256C6)
یادداشتهای طراحی
Design the PCB around the manufacturer land pattern for the AF256 package rather than a generic 256-ball BGA. Verify pad dimensions, solder-mask definition, ball-pitch tolerances, and the recommended via arrangement against the Cyclone II package drawing. Fine-pitch escape routing should be planned before placement because power, configuration pins, clocks, and 152 user I/O can make layer transitions difficult if the board stack-up leaves insufficient routing channels.
Separate the 1.2 V core rail from other supply requirements and follow the manufacturer's recommended decoupling and power-plane topology. Place high-frequency decoupling capacitors close to the device's power balls, while maintaining low-impedance connections between the power and ground planes. Calculate total rail dissipation from the selected logic utilization, core voltage, and device speed grade; then verify that the regulator, copper area, vias, and ambient temperature maintain the required core voltage at worst-case load.
Reserve clock and configuration-routing resources during floorplanning. Route the configuration interface away from high-current switching nodes, follow the manufacturer's guidance for configuration pins and pull resistors, and keep sensitive inputs away from noisy power converters and inductors. Because the device has 152 user I/O, assign pins according to supported banks and voltage standards before committing the schematic. This prevents late changes from invalidating the package escape-routing strategy.
Do not treat 500 MHz as a guaranteed system clock without completing timing analysis using the selected speed grade and actual design constraints. Resource utilization, routing congestion, memory interfaces, I/O standards, and clock topology can reduce achievable performance. Likewise, verify the exact EP2C15AF256C6N ordering code against the pin table before releasing PCB artwork, particularly if EP2C15AF256C6 is being considered as a substitute.
اطلاعات انطباق
No explicit compliance declaration was identified for EP2C15AF256C6N. Confirm RoHS, REACH, halogen-free, and conflict-minerals status with the manufacturer using the exact orderable MPN.